What's a good budget solder gun?
#23
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
I got this at christmas.
I've only used it once now, but it's better than my weller unit.
Amazon.com: OTC 4472 Cordless Solder Tool Kit: Automotive
I've only used it once now, but it's better than my weller unit.
Amazon.com: OTC 4472 Cordless Solder Tool Kit: Automotive
#24
I've got a vintage Weller WTCPN with a TC-201 iron on it. It does everything I've asked of it, though it's not ideal for hauling out into the field. The tips are what controls temperature on this model, so you have to learn to solder with what you've got, not play with the ****. I picked mine up refurbed at a Ham swap meet with a ton of tips and a Sold-A-Pult solder sucker. **** desoldering braid. You just have to get good enough to not lift traces.
For work in the field, I spent $20 at Lowe's and got a Bernzomatic Micro Butane Torch with Soldering Kit. The thing that sealed the deal is you can remove the solder tip and use it as a heat gun on heat shrink. It's far from the best soldering tool, but it gets the job done when I don't want to run an extension cord across the parking lot.
For work in the field, I spent $20 at Lowe's and got a Bernzomatic Micro Butane Torch with Soldering Kit. The thing that sealed the deal is you can remove the solder tip and use it as a heat gun on heat shrink. It's far from the best soldering tool, but it gets the job done when I don't want to run an extension cord across the parking lot.
#25
Forgiveness please for thread necromancy, but there is a good basis of info in this thread, and was the newest of the soldering iron threads I was able to find google searching MT
So, looks like the weller WES-51 has been superseded.
WLC100 is still around for a whole 34 bucks, and the next tier of weller would be this
https://smile.amazon.com/Weller-WE10...dp/B077JDGY1J/
As someone who will probably see limited PCB work, I am leaning towards the WLC100, but I like having good tools and try to subscribe to buy once, cry once; but my car is whole living example of me not following my own rules.
Any thoughts or advice?
@Joe Perez seems to be the resident soldering guru - any experience with the new weller?
So, looks like the weller WES-51 has been superseded.
WLC100 is still around for a whole 34 bucks, and the next tier of weller would be this
https://smile.amazon.com/Weller-WE10...dp/B077JDGY1J/
As someone who will probably see limited PCB work, I am leaning towards the WLC100, but I like having good tools and try to subscribe to buy once, cry once; but my car is whole living example of me not following my own rules.
Any thoughts or advice?
@Joe Perez seems to be the resident soldering guru - any experience with the new weller?
#27
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
we just consolidated a couple offices and acquired a few soldering stations in the process.
The ones we got were worthless, but after checking into it, our old wellers were up for grabs so I grabbed one and a bunch of tips. Pretty sweet deal. Great upgrade from my Circuit Specialists junk.
Most people here use the Pace soldering station for production work and it's pretty amazing, but it starts at $250. Hot swapping tips is pretty awesome (if you need to).
The ones we got were worthless, but after checking into it, our old wellers were up for grabs so I grabbed one and a bunch of tips. Pretty sweet deal. Great upgrade from my Circuit Specialists junk.
Most people here use the Pace soldering station for production work and it's pretty amazing, but it starts at $250. Hot swapping tips is pretty awesome (if you need to).
#28
$11
Been using that little guy for two years. I usually have the temp a few hairs from as low it it'll go but have cranked it up for TV repairs and a few other things and it's been fine. I have a butane iron as well from Lowe's but if I'm doing more than four or five wires/joints I prefer to be plugged in... I have 120v outlets out side though.
Been using that little guy for two years. I usually have the temp a few hairs from as low it it'll go but have cranked it up for TV repairs and a few other things and it's been fine. I have a butane iron as well from Lowe's but if I'm doing more than four or five wires/joints I prefer to be plugged in... I have 120v outlets out side though.
#30
Also consider the TS-100 or the TS-80 irons, those are really good for their price.
If you buy one of those irons, please also invest in a good rubber flexible cable which does not burn.
The great thing about those irons is the active tip: both the heater and the temp sensor are right in the tip, which leads to the precision of a conventional 15W iron when working with small parts on a circuit board and the power of a conventional 100W iron when soldering big gauge wires.
Once you have soldered with an iron with an active tip, you are pretty much spoiled.
At my work (semi conductor industry) we work with JBC irons with active tips. I can recommend those irons to everyone, but too expensive for hobbyist and I am not sure about sellers in US (I am Europe based).
We also have Weller stations and they are well built and will last, but very much behind when it comes to actually soldering. Also their new irons are not much better and the video from EEVBlog linked above shows they have more interest in cost cutting rather than innovation.
My own hobbyist iron is the Hakko FX-888D. Very well built and will last a long time, but I am looking at upgrading that one to something with an active tip.
I also had a cheap Chinese iron (Aoyue), which was terribly built. The cable broke twice and the tips were pretty bad too. Go with a Weller or Hakko and skip the cheap Chinese irons.
If you buy one of those irons, please also invest in a good rubber flexible cable which does not burn.
The great thing about those irons is the active tip: both the heater and the temp sensor are right in the tip, which leads to the precision of a conventional 15W iron when working with small parts on a circuit board and the power of a conventional 100W iron when soldering big gauge wires.
Once you have soldered with an iron with an active tip, you are pretty much spoiled.
At my work (semi conductor industry) we work with JBC irons with active tips. I can recommend those irons to everyone, but too expensive for hobbyist and I am not sure about sellers in US (I am Europe based).
We also have Weller stations and they are well built and will last, but very much behind when it comes to actually soldering. Also their new irons are not much better and the video from EEVBlog linked above shows they have more interest in cost cutting rather than innovation.
My own hobbyist iron is the Hakko FX-888D. Very well built and will last a long time, but I am looking at upgrading that one to something with an active tip.
I also had a cheap Chinese iron (Aoyue), which was terribly built. The cable broke twice and the tips were pretty bad too. Go with a Weller or Hakko and skip the cheap Chinese irons.
#31
Thanks guys, appreciate the advice; the new weller is off the table. I was tempted by the Hakko 888, but I don't see myself building anything on a PCB in the near future, and it looks overkill. The WP-35 does look good, WLC-100 could be slow to warm up allegedly and the quality is probably not as nice as the 35, will toss a coin when I finally escape from work and grab one of those 2 methinks - I doubt I'll ever be soldering anything not 60/40 so the WP-35 probably will be just fine, but need to find a stand, and my OCD shopping habits makes that a multiple hour ordeal of 47 chrome tabs and several rabbit holes. Or just easy button the 100.
thanks!
thanks!
#32
A couple of things to add to your shopping list:
Flush cutters
Tweezers
Brass wire tip cleaner (better than the wet sponge, helps the tip last longer)
Flux (MG Chemicals 8341). I didn't learn about flux until I had soldered for years, makes everything much easier when you learn to use it right.
Desoldering braid
And the reason why I don't like the Wp35 is it doesn't have adjustable heat. It is a classic and it works, but I'll take the WLC100 over it.
also: always leave your tip covered in solder when you turn it off. It'll help the tip last longer.
Flush cutters
Tweezers
Brass wire tip cleaner (better than the wet sponge, helps the tip last longer)
Flux (MG Chemicals 8341). I didn't learn about flux until I had soldered for years, makes everything much easier when you learn to use it right.
Desoldering braid
And the reason why I don't like the Wp35 is it doesn't have adjustable heat. It is a classic and it works, but I'll take the WLC100 over it.
also: always leave your tip covered in solder when you turn it off. It'll help the tip last longer.
#33
We have an old Weller WES-51 at work. It's nice, but the handle gets hot. I love my Hakko 936 and bring that in when I am doing a bunchbof sokdering at work.
If you are only going to be doing occational soldering, 1-2 wires in the car kind of work, I love my Weller Portisol for that. Butane powered, so you can use it anywhere. Just mind what you are pointing the exhaust at.
If you are only going to be doing occational soldering, 1-2 wires in the car kind of work, I love my Weller Portisol for that. Butane powered, so you can use it anywhere. Just mind what you are pointing the exhaust at.
Thread
Thread Starter
Forum
Replies
Last Post
Braineack
Current Events, News, Politics
4
05-03-2013 01:49 PM