Subaru Intercooler
#41
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
And onto the IC. Why not another stock one with 2 ratchet straps around it to keep the end tanks from popping off?
#44
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
My maps always show 1.0 on a reset. But, then again, I never even looked at a LV until after my car was opensource tuned. So, stock ECU maps have 0.5 on resets - wow, learn something new every day. Still, 1.0 makes more sense to me - kind of like starting at 100% ok and going down from there, lol.
#45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Nope, its actually way smarter to start at .5 and let the car advance once it determines everything is ok. Best way to eliminate knock is by increasing in steps rather then reacting and pulling the multiplier.
Most people (myself included) will set it to 1 when tuning because its so much easier and faster when tuning and because you can let off right away should you encounter knock. After I'm done with a map I usually set it back to .5 on reset to be safe. Just my .02
Most people (myself included) will set it to 1 when tuning because its so much easier and faster when tuning and because you can let off right away should you encounter knock. After I'm done with a map I usually set it back to .5 on reset to be safe. Just my .02
#48
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So, I replaced the intercooler, reset the ECU, and the codes came back the next day. So this weekend I swapped the Cyl 1 and 3 fuel injectors with the cyl 2 and 4 injectors to see if the codes moved from 2&4 to 1&3. The ECU reset when I had the battery unhooked, but it has been 3 days and a couple hundred miles and there is no code and this is what my learning view looks like. I'm not sure what that AF table is, but the knock correction looks fine. I'm going to have the fuel injectors cleaned over the summer regardless of whether the codes come back or not, since there was clearly SOME issue caused by the fuel injectors. I am not sure the car runs quite right still, but it is a lot better than it was last week. More power, less stumbling at idle, and overall just feels better. So weird.
#51
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I went with a used stock top mount for now. I am going to reinforce it as soon as I have the time. I really don't have much use for a frontmount on that car as it will never see anything beyond stage 1. The miata gets all my modding attention.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM