Installed new memory and now my monitor is dead!!!
#1
Antisaint
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
WTF!!! ![vash](https://www.miataturbo.net/images/smilies/vash.gif)
I ordered some Crucial 2gb memory to upgrade the existing 1gb of memory in my Asus EEEpc and now the ******* monitor is dead!!!
I got the exact kind it said to replace it with! I use this little ****** daily, so this kinda screws me up hardcore.
I'm going to call Asus and see what they say. Any advice?
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
I ordered some Crucial 2gb memory to upgrade the existing 1gb of memory in my Asus EEEpc and now the ******* monitor is dead!!!
I got the exact kind it said to replace it with! I use this little ****** daily, so this kinda screws me up hardcore.
I'm going to call Asus and see what they say. Any advice?
#4
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I can't see where memory would fall into the equation. Do like stated before and check to see if you might have done something to the monitor connection. I can't see why the connection for that would be accessible from the memory port cover, but it's possible.
#11
Antisaint
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I should have mentioned that I tried putting the old memory back in with the same deal, no monitor.
I was careful not to **** anything up when I removed the old memory and put in the new one, so I don't think I could have done it myself.
I bought the memory that Amazon recommends for the EEEpc, only I didnt buy it from them.
The indian bitch on the phone just got me so aggravated that I'm going outside to have a smoke. This ******* lady was such a soft talker, and paused so long between words, etc etc. If I could have reached through the phone and choked the ****, I would have.![vash](https://www.miataturbo.net/images/smilies/vash.gif)
I'm going to give Amazon a call now and see what they'll do for me, seeing that I bought it from them.
I was careful not to **** anything up when I removed the old memory and put in the new one, so I don't think I could have done it myself.
I bought the memory that Amazon recommends for the EEEpc, only I didnt buy it from them.
The indian bitch on the phone just got me so aggravated that I'm going outside to have a smoke. This ******* lady was such a soft talker, and paused so long between words, etc etc. If I could have reached through the phone and choked the ****, I would have.
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
I'm going to give Amazon a call now and see what they'll do for me, seeing that I bought it from them.
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Does the eeePC have a VGA output on the side? You can try to hook it up to an external monitor and see if it works. If it does and your laptop screen doesn't work then there is something wrong with the screen or a connector leading to it.
But as mentioned you should try swapping in your original ram to see if the ram is the problem. I've had RAM cause issues with booting before.
But as mentioned you should try swapping in your original ram to see if the ram is the problem. I've had RAM cause issues with booting before.
#13
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well I was reading it like posted. Dead typically means fried or broken. I guess memory in this case would matter if the monitor is showing black and/or isn't booting. Not sure why putting the old memory back in wouldn't fix the issue. If it doesn't boot, it doesn't boot. It shouldn't change anything itself, settings wise.
#15
Antisaint
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm on hold with Amazon now. Of course the first thing out of her mouth was "since its been more than 30 days.......blah blah blah".
I'm pissed. The computer was working fine until I put the new memory in. Now it wont even work with the old memory back in place. God DAMMIT!
I'm pissed. The computer was working fine until I put the new memory in. Now it wont even work with the old memory back in place. God DAMMIT!
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
#16
Antisaint
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Does the eeePC have a VGA output on the side? You can try to hook it up to an external monitor and see if it works. If it does and your laptop screen doesn't work then there is something wrong with the screen or a connector leading to it.
But as mentioned you should try swapping in your original ram to see if the ram is the problem. I've had RAM cause issues with booting before.
But as mentioned you should try swapping in your original ram to see if the ram is the problem. I've had RAM cause issues with booting before.
I think I might take it down to geekfags at bestbuy and see what they say. I want to know what caused this you know. Was it my fault? Was it the wrong type of memory? Was the memory bad?
At first the lady from Amazon told me to call Asus directly and deal with them, seeing that they offer a 1 year warranty. I told her that I was already on the phone with Asus and that I don't want to deal with them. She asked if I had a case number from them, which I did. Once I gave her that she put me on hold and came back and said her supervisor authorized a replacement unit, but unfortunately they don't have any in stock.
![Tear](https://www.miataturbo.net/images/smilies/tear.gif)
I think I'll see what the geeks say first I guess. Does anyone have an idea on what they charge for something like this? I'm hoping its something in the range of free. lol
#17
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It just doesn't make any sense to me that the memory would cause an irreversible issue with being able to boot. Swapping the faulty/incorrect hardware back to the old should make it work again. I have never had something like this happen with any hardware. At most it will fail to post and then work fine once I either seat it correctly, or swap back to old. Did you by any chance feel the old memory catch, hard to remove, or the new stuff tough to seat? Maybe it's a socket issue.
#18
Antisaint
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (17)
Join Date: Feb 2007
Location: Danbury, CT
Posts: 4,564
Total Cats: 58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It just doesn't make any sense to me that the memory would cause an irreversible issue with being able to boot. Swapping the faulty/incorrect hardware back to the old should make it work again. I have never had something like this happen with any hardware. At most it will fail to post and then work fine once I either seat it correctly, or swap back to old. Did you by any chance feel the old memory catch, hard to remove, or the new stuff tough to seat? Maybe it's a socket issue.
I tried using this cable to see if anything comes up on this monitor, but with either the old memory or the new, still nothing. And now it's randomly shutting off on me. I tried hitting the FN and what looks like a monitor key (F8), and it just shut off.
See, I tired to save like $10 ******* dollars by getting the memory off ebay rather than Amazon, and now this **** happens. I assume there is such a thing as "bad" new memory? The package was sealed so it was new, but could it be bad?
This is only the 2nd time I've changed memory so please bear with me. I'm not very computer savvy by any means. lol
#19
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It came out easily and the new one popped in easily. I did snap the head off the screw that holds the little cover on, but I didnt mention that cause I'm sure it would matter. Other than that it seemed to seat just fine. Snapped in all the way, pushed down, and the clips swung in and held it.
I tried using this cable to see if anything comes up on this monitor, but with either the old memory or the new, still nothing. And now it's randomly shutting off on me. I tried hitting the FN and what looks like a monitor key (F8), and it just shut off.
See, I tired to save like $10 ******* dollars by getting the memory off ebay rather than Amazon, and now this **** happens. I assume there is such a thing as "bad" new memory? The package was sealed so it was new, but could it be bad?
This is only the 2nd time I've changed memory so please bear with me. I'm not very computer savvy by any means. lol
I tried using this cable to see if anything comes up on this monitor, but with either the old memory or the new, still nothing. And now it's randomly shutting off on me. I tried hitting the FN and what looks like a monitor key (F8), and it just shut off.
See, I tired to save like $10 ******* dollars by getting the memory off ebay rather than Amazon, and now this **** happens. I assume there is such a thing as "bad" new memory? The package was sealed so it was new, but could it be bad?
This is only the 2nd time I've changed memory so please bear with me. I'm not very computer savvy by any means. lol
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You could be a victim of "ESD"
Did you ground yourself properly before inserting the RAM?
Were you wearing socks and shoes, or just socks, when you did the RAM upgrade?
Were you standing on carpet, hardwood, tile, or a rubber mat?
Were you wearing any nylon clothing?
Had you been playing with balloons prior?
Did you ground yourself properly before inserting the RAM?
Were you wearing socks and shoes, or just socks, when you did the RAM upgrade?
Were you standing on carpet, hardwood, tile, or a rubber mat?
Were you wearing any nylon clothing?
Had you been playing with balloons prior?