|
Originally Posted by NA6C-Guy
(Post 775615)
Bunch of pins, probably 25 or so. Looks like a main connector, I can't image it not being used, but I can't find the other end. I've had the dash out before and don't recall this connector...
The connector for Cruise Control sounds like this, but I recall it being nearer to the clutch pedal and the fuse box than the instrument cluster. That might be Common Connector X-17. It carries the rear headrest speakers, some cruise control stuff, the fuel tank gauge, the seat belt light, and the turn signal indicators on the dash. Knowing the wire colors in it would be really helpful. |
Originally Posted by Braineack
(Post 775388)
pics or ban, pusha.
|
Originally Posted by NA6C-Guy
(Post 775617)
Everything seems to be fine without it though. Car runs, everything seems to work... I'll run with it for now.
|
Originally Posted by FRT_Fun
(Post 775626)
Yes, can't remember what it was for, but noticed it when doing my custom harness.
I'm also thinking about maybe doing away with the dash completely in the future, once it's less daily driver, and more fun car. I'm sick of broken clips and tabs. I'm on my second cluster hood and this one is now completely clipless. Who the fuck designed those goddamn things. The clip sits on little fragile posts that are easily broken or split. Also sick of the center surround flopping around. I really would like to just rip the skin off the dash, remove ALL of the under dash shit, blower motor, heater core, everything a/c related, tuck the harnesses the best I can, and just run with the dash support. Maybe have it powder coated black and make some mounts to mount either the stock cluster or run aftermarket gauges fastened to the tube. Think I've seen interiors like that before on race cars. Probably not street legal, but we don't have inspections around here, and cops would probably never say anything about it. About to start shopping for a new roll bar and door bars, some seats and harnesses. |
3 Attachment(s)
Goddamn cedar trees. Leave the top down for a few hours and I get a handful of needles in each floorboard. Pretty much done, still need to find a place for the ecu for now, and do something with my fog light wiring as well as the parking brake wire. The other main harness on the passenger side tucked under the door sill plastic piece very nicely. I see some seam sealer I really wish I had taken care of. The big square hole in the passenger foot well was covered over, but I noticed it was spongy after it dried. I didn't realize it was a soft cover, or else I would have pulled it off and cleaned up the sealer around it. Oh well.
Attachment 186957 Attachment 186958 Attachment 186959 |
PS, why did Suzuki have to go and stop selling the DRZ400SM in the US!? Well, I understand why, but it sucks. I really want one, and finding a used one is tough. Finding a used one in good shape is even tougher.
|
what seats are those? custom covered NA?
|
Yeah, Katzkin. I fucked up the driver seat by trying to "improve" the foam, and ended up making the seat pad too thick, and it took all of the wrinkles/bunching out of the leather like the passenger seat has.
|
Originally Posted by NA6C-Guy
(Post 775723)
Yeah, Katzkin. I fucked up the driver seat by trying to "improve" the foam, and ended up making the seat pad too thick, and it took all of the wrinkles/bunching out of the leather like the passenger seat has.
|
Well, no. Those are the bunched/gathered leather style seats.
http://www.duettomotors.com/customer...zkin-seats.jpg |
oh, I prefer it tight
|
Originally Posted by NA6C-Guy
(Post 775699)
PS, why did Suzuki have to go and stop selling the DRZ400SM in the US!? Well, I understand why, but it sucks. I really want one, and finding a used one is tough. Finding a used one in good shape is even tougher.
|
Originally Posted by pusha
(Post 775733)
oh, I prefer it tight
Originally Posted by Gearhead_318
(Post 775736)
I want one bad, there are like two on craigslist locally.
|
|
Originally Posted by viperormiata
(Post 775739)
|
Originally Posted by pusha
(Post 775793)
serves that little shit right
|
Originally Posted by Gearhead_318
(Post 775795)
Tactical as f*ck
|
Originally Posted by FRT_Fun
(Post 775823)
Screw sending him to the principals office. Execute for terrorism.
|
Originally Posted by pusha
(Post 775793)
serves that little shit right
|
What's wrong with the youth of today? |
All times are GMT -4. The time now is 11:20 AM. |
|
© 2024 MH Sub I, LLC dba Internet Brands