How (and why) to Ramble on your goat sideways
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It truly sucks that such bad stuff happens to good people. I hope you’re OK and your wife’s computer can be resurrected. Very sad news about Mustafa.
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,222
Total Cats: 1,701
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thank you for your kind words.
My problems pale in comparison to a loss of life obviously, but all of this just sucked whatever energy and enthusiasm I have, at least for today.
I need to get back on the proverbial horse tomorrow.
On a brighter note, I did notice a very encouraging feature of this turbo setup I am building...
The assembly is bolted on the engine, oil feed and return lines are connected on both turbos, they are just not connected to the intercooler at this point.
As I was revving the engine past the 1200-1300 rpm mark, I started noticing a pretty serious whoosh of air from the turbo outlet.
I connected a vacuum pump to the bypass valve and activated it out of curiosity, to isolate the small, high pressure turbo, and the flow at those low rpms just amazed me.
Much more than my MP62 ever put out, and somewhat cooler, like 40C...
This is by no means a scientific way of comparing two different forced induction systems, but the rev range...
It will be a pretty sweet setup when I finish this engine.
Silver lining and all.
My problems pale in comparison to a loss of life obviously, but all of this just sucked whatever energy and enthusiasm I have, at least for today.
I need to get back on the proverbial horse tomorrow.
On a brighter note, I did notice a very encouraging feature of this turbo setup I am building...
The assembly is bolted on the engine, oil feed and return lines are connected on both turbos, they are just not connected to the intercooler at this point.
As I was revving the engine past the 1200-1300 rpm mark, I started noticing a pretty serious whoosh of air from the turbo outlet.
I connected a vacuum pump to the bypass valve and activated it out of curiosity, to isolate the small, high pressure turbo, and the flow at those low rpms just amazed me.
Much more than my MP62 ever put out, and somewhat cooler, like 40C...
This is by no means a scientific way of comparing two different forced induction systems, but the rev range...
It will be a pretty sweet setup when I finish this engine.
Silver lining and all.
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,222
Total Cats: 1,701
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This is over my head, and kindly need your help, guys...
https://www.miataturbo.net/engine-pe...4/#post1503350
Post #31
Thank you!
https://www.miataturbo.net/engine-pe...4/#post1503350
Post #31
Thank you!
Elite Member
iTrader: (21)
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,623
Total Cats: 1,277
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just got the bill for my second surgery, the one where they placed all the stents.
$128,000 for the stents themselves, $204,000 for the entire surgery. No wonder health insurance costs so much.
$128,000 for the stents themselves, $204,000 for the entire surgery. No wonder health insurance costs so much.
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,222
Total Cats: 1,701
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
@y8s, I told you Nitinol was expensive...
Seriously, this is highway robbery.
Hope you never have to through such an ordeal again.
Last edited by Godless Commie; 09-26-2018 at 10:48 PM.
Elite Member
iTrader: (21)
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,623
Total Cats: 1,277
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I certainly didn't have to pay that much. $80 was my co-pay, which was cheaper than the hotel we stayed in afterwards. Insurance paid about $23,000, and the rest was "adjusted".
And, quite frankly, while it did involve some pain and some recovery time, it was nothing like the alternative, so I am thankful that I was able to participate in this study. I hope it saves many other people from the pain and trauma of the traditional surgery in the future.
And, quite frankly, while it did involve some pain and some recovery time, it was nothing like the alternative, so I am thankful that I was able to participate in this study. I hope it saves many other people from the pain and trauma of the traditional surgery in the future.
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Holy ****...
@y8s, I told you Nitinol was expensive...
Seriously, this is highway robbery.
Hope you never have to through such an ordeal again.
@y8s, I told you Nitinol was expensive...
Seriously, this is highway robbery.
Hope you never have to through such an ordeal again.
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Devil's advocate:
Is it?
How many of that specific stent do you figure the company sells per year?
What do you figure were the R&D costs to develop it, the ongoing costs to comply with all of the requirements and regulations to manufacture it, and the legal costs to defend the company against claims arising from its occasional failure?
I'm not defending the system as a whole, merely trying to suggest that there are externalities to the healthcare system proper which cause it to spend money in ways not directly associated with patient care.
Divide B into A.
Is it?
How many of that specific stent do you figure the company sells per year?
What do you figure were the R&D costs to develop it, the ongoing costs to comply with all of the requirements and regulations to manufacture it, and the legal costs to defend the company against claims arising from its occasional failure?
I'm not defending the system as a whole, merely trying to suggest that there are externalities to the healthcare system proper which cause it to spend money in ways not directly associated with patient care.
Divide B into A.
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Devil's advocate:
Is it?
How many of that specific stent do you figure the company sells per year?
What do you figure were the R&D costs to develop it, the ongoing costs to comply with all of the requirements and regulations to manufacture it, and the legal costs to defend the company against claims arising from its occasional failure?
I'm not defending the system as a whole, merely trying to suggest that there are externalities to the healthcare system proper which cause it to spend money in ways not directly associated with patient care.
Divide B into A.
Is it?
How many of that specific stent do you figure the company sells per year?
What do you figure were the R&D costs to develop it, the ongoing costs to comply with all of the requirements and regulations to manufacture it, and the legal costs to defend the company against claims arising from its occasional failure?
I'm not defending the system as a whole, merely trying to suggest that there are externalities to the healthcare system proper which cause it to spend money in ways not directly associated with patient care.
Divide B into A.
Elite Member
iTrader: (21)
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,623
Total Cats: 1,277
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The other 5 stents are standard, off the shelf ones used in all sorts of vascular surgeries. So, probably many thousands per year.
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
For years, I've been trying to remember the source of a quote.
"Once, I built a raft out of dead monkeys. I had no wood, you see."
I think it was something stupid, like Beavis while in character as Cornholio. But it's driving me mad.
Does anyone recognize this?
"Once, I built a raft out of dead monkeys. I had no wood, you see."
I think it was something stupid, like Beavis while in character as Cornholio. But it's driving me mad.
Does anyone recognize this?