Going back to NA
#1
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Going back to NA
Hey guys, I've decided that enough is enough and I'm going to take my car back to stock.
I wanted to take this opportunity to thank all who've assisted me and made me laugh while I tried to make it work.
I also wanted to provide a heads up of what's going to be listed in the For Sale section of mt.net pretty soon:
Here's a list of what I'm going to put of for sale next week:
- Used Begi S5 Turbo kit without WG and BOV. This one has a T3 60 trim. My turbine housing is a .63 and the compressor was swapped out for a T04E compressor. It also came with the largest IC available from Begi.
- Tial BOV and WG:(I bought both brand new and used them for less than 3,000 miles
- AEM: PNP for 96/97
- RC injectors
- Enthuza Midpipe and straight exhaust for an NB
I'm aware that most of us mt.net members are stingy (myself included) and of the fact that there aren't many NB owners here so my guess is most of my stuff will not be adequate for you but I still want to give you guys first crack at things before posting them in other forums.
BTW, since I've seen it before, don't waste your breath asking me to part the turbo kit up. It ain't gonna happen
I'll still be around to bust your ***** more often than some would like
I've had a blast.
Rafa
I wanted to take this opportunity to thank all who've assisted me and made me laugh while I tried to make it work.
I also wanted to provide a heads up of what's going to be listed in the For Sale section of mt.net pretty soon:
Here's a list of what I'm going to put of for sale next week:
- Used Begi S5 Turbo kit without WG and BOV. This one has a T3 60 trim. My turbine housing is a .63 and the compressor was swapped out for a T04E compressor. It also came with the largest IC available from Begi.
- Tial BOV and WG:(I bought both brand new and used them for less than 3,000 miles
- AEM: PNP for 96/97
- RC injectors
- Enthuza Midpipe and straight exhaust for an NB
I'm aware that most of us mt.net members are stingy (myself included) and of the fact that there aren't many NB owners here so my guess is most of my stuff will not be adequate for you but I still want to give you guys first crack at things before posting them in other forums.
BTW, since I've seen it before, don't waste your breath asking me to part the turbo kit up. It ain't gonna happen
I'll still be around to bust your ***** more often than some would like
I've had a blast.
Rafa
#7
Rafa, sad to hear that, I was looking forward to driving a Turbo Miata when visiting the DR, lol.
I hope you figure out what your next approach will be as I doubt you can bare the stock power level.
Good luck to ya and by all means to stick around for some of that old man humor
Regards,
Dan
I hope you figure out what your next approach will be as I doubt you can bare the stock power level.
Good luck to ya and by all means to stick around for some of that old man humor
Regards,
Dan
#11
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Rafa, sad to hear that, I was looking forward to driving a Turbo Miata when visiting the DR, lol.
I hope you figure out what your next approach will be as I doubt you can bare the stock power level.
Good luck to ya and by all means to stick around for some of that old man humor
Regards,
Dan
I hope you figure out what your next approach will be as I doubt you can bare the stock power level.
Good luck to ya and by all means to stick around for some of that old man humor
Regards,
Dan
This is the deal: **** MY TUNER! I'll go with a smaller one in the not too distant future but with a Bipes. And for sure I'll ask dumb questions!
I'm going around with a car that won't idle good if the A/C is on and which if it doesn't have the A/C on doesn't see temps above 190 no matter the traffic; if for some reason I decide to turn the A/C on the coolant temp climbs to 220* in a few minutes. **** MY TUNER
As you know, I was planning on building my engine (here's a little secret for most). I had already bought the ETD Rods and FM Pistons. My "tuner" has an Evo VIII and he's built it twice and twice it has broken before the 1,000Km mark. WTF?
Someday I'll buy a completely built engine in the States.
I'm not done with this turbo stuff by any means
Regards,
Rafa
#18
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
We'll reach some understanding.
But I'm keeping the car and will keep working at it!
I'll be back turbo someday but not before asking multiple stupid questions