View Poll Results: Do we need a Subaru Subforum?
Yes! We need this!
0
0%
No! It's not a Miata and I don't care!
0
0%
Voters: 9001. You may not vote on this poll
The Dedicated URABUS Thread
#1221
Ooh nice, I'll look around on their site
*edit: browsing summit, there's also this:
http://www.summitracing.com/parts/vp...FQguaQodlIMJ1Q
*edit: browsing summit, there's also this:
http://www.summitracing.com/parts/vp...FQguaQodlIMJ1Q
#1222
Is Vibrant decent? I know it's only a catch can, but for some reason I always thought they were a "barely better than eGay option?"
Then again, even at only 33, I've been screwing with cars long enough and having to piece stuff together, I like plug-n-play options.
I prefer driving to tinkering.
Then again, even at only 33, I've been screwing with cars long enough and having to piece stuff together, I like plug-n-play options.
I prefer driving to tinkering.
#1227
The AOS doesnt have much storage. And any AOS that you can buy that has enough storage and also a non shitty design costs over $400. You can get a can with enough onboard storage with a shitty design for $30, or you can get an ASO that can hold like 2 hours of street driving worth of oil with a design thats decent for like $180. Or you can buy the two in one case for $400. Or combine the two for $210 and just have two cans.
#1228
the above posted dual catch cans should easily hold at least a month worth of street driving blow by. IMO. If I get more blow by than that, I'll be concerned.
I dunno. This is not high on priority list, so I'm taking my time and really thinking of the options. Kinda open to consider anything. Will likely do DIY or at least partial diy (using bought container/can and using own plumbing/routing/mounting solution)
I dunno. This is not high on priority list, so I'm taking my time and really thinking of the options. Kinda open to consider anything. Will likely do DIY or at least partial diy (using bought container/can and using own plumbing/routing/mounting solution)
#1229
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
this should hold a lot.
McMaster-Carr
McMaster-Carr
edit: max temp is a little low on the one i linked.
how about: http://www.mcmaster.com/#9994k76/=y3jy6w
McMaster-Carr
McMaster-Carr
edit: max temp is a little low on the one i linked.
how about: http://www.mcmaster.com/#9994k76/=y3jy6w
#1231
Hoping to get some help from the experts here. I got an 05 Forester that threw a rod. Its a 2.5sohc, manual.
I put in a used engine that was supposed have new headgaskets, t-belt and pulleys. Well it had blown gaskets and when I fired it up it sounded like it had rod knock. So I figured I was screwed and went and bought an engine from a salvage yard that had been tested. I put that in and the car ran like a stock subaru but after a few minutes of idling it made the same knocking sound. Whats weird is that the sound comes and goes. And when it beings it literally sounds like a bolt is being bounced around in the oil pain. It also runs poorly and it even stalled once when the noise began. If I'm driving the car it dosnt seem to make noise or if it does its just a quick tap. And if it starts and I begin driving the noise subsides.
The car pulls just like my other 05 with no indication of engine issues aside from the horrendous occasional knocking.
I have on the car a gates timing belt and all the pulleys should be essentially new, though I'm debating on buying another timing belt kit just to be sure. The car also has a brand new clutch kit.
I cleared the exhaust of the leftover engine chunks that the original engine put there and I checked to make sure the intake manifold didn't have any debris in it.
The engine is technically out of an 03 impreza so I reused the 05 intake manifold, crank and drivers side cam gears (which have a different tooth pattern then the 03). I did not reuse the pass. Side cam gear as I assumed they were the same and I had no problems timing the motor.
When I started the car this morning I ran fine and I couldn't get it to make the noise until it was fully warmed up. (Not sure if this actually makes a difference or I wasn't trying hard enough).
The only other issue the car has is it overheats if I drive it for a few miles. I assume this is probably because the engine sat awhile and the water pump is rust. I will flush the system and change the pump just to be sure.
Hoping I can get some advice from you helpful folks as to what might be causing my mystery knocking.
Thank you and sorry for the long winded post.
I put in a used engine that was supposed have new headgaskets, t-belt and pulleys. Well it had blown gaskets and when I fired it up it sounded like it had rod knock. So I figured I was screwed and went and bought an engine from a salvage yard that had been tested. I put that in and the car ran like a stock subaru but after a few minutes of idling it made the same knocking sound. Whats weird is that the sound comes and goes. And when it beings it literally sounds like a bolt is being bounced around in the oil pain. It also runs poorly and it even stalled once when the noise began. If I'm driving the car it dosnt seem to make noise or if it does its just a quick tap. And if it starts and I begin driving the noise subsides.
The car pulls just like my other 05 with no indication of engine issues aside from the horrendous occasional knocking.
I have on the car a gates timing belt and all the pulleys should be essentially new, though I'm debating on buying another timing belt kit just to be sure. The car also has a brand new clutch kit.
I cleared the exhaust of the leftover engine chunks that the original engine put there and I checked to make sure the intake manifold didn't have any debris in it.
The engine is technically out of an 03 impreza so I reused the 05 intake manifold, crank and drivers side cam gears (which have a different tooth pattern then the 03). I did not reuse the pass. Side cam gear as I assumed they were the same and I had no problems timing the motor.
When I started the car this morning I ran fine and I couldn't get it to make the noise until it was fully warmed up. (Not sure if this actually makes a difference or I wasn't trying hard enough).
The only other issue the car has is it overheats if I drive it for a few miles. I assume this is probably because the engine sat awhile and the water pump is rust. I will flush the system and change the pump just to be sure.
Hoping I can get some advice from you helpful folks as to what might be causing my mystery knocking.
Thank you and sorry for the long winded post.
#1232
Sounds like you keep replacing crap with more crap without really verifying if it's crap.
Have you done comp/leakdown on any of these? Also if it's overheating it's probably got bad HG's. I've never seen wp's rusted to the point of seizing, but I don't have much high mile SOHC experience
Have you done comp/leakdown on any of these? Also if it's overheating it's probably got bad HG's. I've never seen wp's rusted to the point of seizing, but I don't have much high mile SOHC experience
#1233
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
Also have never heard of a pump not pumping from sitting. They will certainly leak though if they rust to much. The rusty shaft will tear up the seal when its asked to turn again.
That noise sounds bad the way you describe it. The thing about internal engine noises that arnt your standard lifter or rod knock is that they are hard to diagnose by listening, let alone by describing over the net.
Id check the oil for particles and cut open the oil filter.
That noise sounds bad the way you describe it. The thing about internal engine noises that arnt your standard lifter or rod knock is that they are hard to diagnose by listening, let alone by describing over the net.
Id check the oil for particles and cut open the oil filter.
#1234
The biggest issue is the two motors make an identical noise. The first engine definitely had blown headgaskets. Oil was milky, and was dripping coolant from the heads. Oil is clean of debris on "new" engine. I don't think the water pump is seized, I just think its full of garbage. The coolant literally turned rust orange and it's chunky. Because I have a new waterpump I will replace it just in case. The tensioner and all the pulleys I have seem fine after I checked them.
It literally sounds like rod knock, except it comes and goes as it pleases. Sometimes I have to give it hard throttle stabs to get it to make the noise, other times it will just start up on its own (at idle). The other unusual thing is it doesn't misfire. I don't get a flashing cel or any cel.
I will keep plugging away and try and come up with something.
It literally sounds like rod knock, except it comes and goes as it pleases. Sometimes I have to give it hard throttle stabs to get it to make the noise, other times it will just start up on its own (at idle). The other unusual thing is it doesn't misfire. I don't get a flashing cel or any cel.
I will keep plugging away and try and come up with something.
#1236
11 second daily driver
12 second driver
But I think I'll live
No launch at all
Baby launch, figuring out the clutch, and short shifted into 2nd.
I really need more practice, but there was some audi club event and everyone else got TWO runs.
TWO. The whole night. I felt like asking for a refund, it was almost pointless.
12 second driver
But I think I'll live
No launch at all
Baby launch, figuring out the clutch, and short shifted into 2nd.
I really need more practice, but there was some audi club event and everyone else got TWO runs.
TWO. The whole night. I felt like asking for a refund, it was almost pointless.