Anyone here know about getting circuit boards printed?
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've been fooling around with arduinos, breadboards, protoboards, etc and I've done a few simple projects, which has revealed to me that nothing I've made is really suitable for sticking behind the firewall or even on the dashboard. I've been thinking about moving on to proper printed boards, nice packaging and stuff like that.
I see about a billion choices for EDA tools and quite a few choices for people willing to manufacture in small lots based on designs. I'd probably stick with atmel stuff because I'm ******* lazy, though I don't imagine this matters at all for doing board design.
Does anyone have any suggestions for good software tools, good output formats and good small quantity manufacturers.
I see about a billion choices for EDA tools and quite a few choices for people willing to manufacture in small lots based on designs. I'd probably stick with atmel stuff because I'm ******* lazy, though I don't imagine this matters at all for doing board design.
Does anyone have any suggestions for good software tools, good output formats and good small quantity manufacturers.
#2
Senior Member
iTrader: (1)
Join Date: Dec 2010
Location: Farmington Hills, MI
Posts: 1,218
Total Cats: 175
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I don't know much of the details, but we use Osh Park for our FSAE custom PCB's. https://oshpark.com/
#3
Tweaking Enginerd
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: Mar 2013
Location: Boulder, CO
Posts: 1,809
Total Cats: 366
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Eagle free and whatever sunstone's (pcbexpress) free tool is are decent options. The sunstone tool will have the output file formats built in for submission to their online quote tool. When I was ordering boards I used efab quite a bit. Eagle has a strong opensource community.
They are really all pretty much the same for the tech level you will need most likely.
They are really all pretty much the same for the tech level you will need most likely.
#4
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Do you already have your own schematic and layout software?
If not, I've had good experiences with ExpressPCB
They require you to use their proprietary schematic and layout software, which is not compatible with any generic layout tools so far as I know, so you're kind of locked in to using their fab service once done. That said, their tools, while lacking certain features, are extremely simple to use, and their service, for small orders, is both fast and cheap.
If not, I've had good experiences with ExpressPCB
They require you to use their proprietary schematic and layout software, which is not compatible with any generic layout tools so far as I know, so you're kind of locked in to using their fab service once done. That said, their tools, while lacking certain features, are extremely simple to use, and their service, for small orders, is both fast and cheap.
#5
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
<p>The green board was drawn in WinQcad and produced by Silver Circuits. (The blue board on top is a completely different story)</p><p><img src="http://cimg2.ibsrv.net/gimg/www.miataturbo.net-vbulletin/2000x1124/80-145893d1438344962_anyone_here_know_about_getting_c ircuit_boards_printed_20150105_104023_0ce67dd3a6ba 296eaeb59535f7dfbe17762c4d76.jpg" title="" /><br /><br /> </p>
#6
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I used Eagle to design a small PCB. Trying to find the printer...
edit: thumbs down. I can find references in email to the file creation, but i cant find who i ordered it from. I remember it being decent priced.
edit: thumbs down. I can find references in email to the file creation, but i cant find who i ordered it from. I remember it being decent priced.
Last edited by Braineack; 07-31-2015 at 08:36 AM.
#7
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Do you already have your own schematic and layout software?
If not, I've had good experiences with ExpressPCB
They require you to use their proprietary schematic and layout software, which is not compatible with any generic layout tools so far as I know, so you're kind of locked in to using their fab service once done. That said, their tools, while lacking certain features, are extremely simple to use, and their service, for small orders, is both fast and cheap.
If not, I've had good experiences with ExpressPCB
They require you to use their proprietary schematic and layout software, which is not compatible with any generic layout tools so far as I know, so you're kind of locked in to using their fab service once done. That said, their tools, while lacking certain features, are extremely simple to use, and their service, for small orders, is both fast and cheap.
#8
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 407
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I dont think you can wrong with Eagle. Plus, it is free, albeit with a limitation on board size.
I looked into doing some DIY etching. There are a few ways to do it, the easiest is to buy boards with a photosensitive coating on them. You draw your circuit and print it out with a laser printer on a transparency, lay it on the board and stick it in the sun. Afterwards you can wash away the copper, leaving behind your traces.
I still think it looks like fun. Not sure if it makes much sense if youre just trying to get **** done.
I looked into doing some DIY etching. There are a few ways to do it, the easiest is to buy boards with a photosensitive coating on them. You draw your circuit and print it out with a laser printer on a transparency, lay it on the board and stick it in the sun. Afterwards you can wash away the copper, leaving behind your traces.
I still think it looks like fun. Not sure if it makes much sense if youre just trying to get **** done.
#9
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Product choices vary from two-sided bare to four-layer with soldermask and silkscreen, and the quality has always been good.
One nice thing about their software package, frankly, is that it's simple. It lacks a lot of features that you find in higher-level stuff (like autorouting), but it very easy to learn and use.
#10
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
<p>by far the best (cheapest) place to get circuit board produced for low volume runs...</p><p> </p><p>https://www.seeedstudio.com/service/index.php?r=pcb</p><p> </p><p> </p>
Last edited by cyotani; 07-31-2015 at 10:32 AM.
#11
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ive used OSHPark and Sunstone. OSHPark is easier to use and cheaper for small runs.
You can use this tool to compare the major online suppliers:
PCB Shopper » A Price Comparison Site for PCBs
You can use this tool to compare the major online suppliers:
PCB Shopper » A Price Comparison Site for PCBs
#13
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am spoiled with altium at work but OSH park has been great to deal with. Customer service is great. I had a 10 x 20 in panel that killed their online tool. They processed it manually and provided some feedback for changes. Whole thing was less than $500 and about two weeks for 3 boards.
That's 600 sq in of board. Small boards are like $15 for 3.
That's 600 sq in of board. Small boards are like $15 for 3.
#16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Using Eagle is like being tortured. After years of using Eclipse for software development, using software that looks like it was written in the early 90s and costs thousands of dollars is a rude awakening.
I'm trying KiCad next.
I'm not objecting to the appearance of Eagle, but to the usability. And yeah, I realize that the basic version of Eagle is free.
I'm trying KiCad next.
I'm not objecting to the appearance of Eagle, but to the usability. And yeah, I realize that the basic version of Eagle is free.
#17
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
In contrast the other day I downloaded "Room EQ Wizard", learned it, figured out how to connect a mic, measured my room audio with the sub in 3 different positions, and tuned my subwoofer amp's DSP in 5 hours, without every cracking open the manual. It's free software written by one guy. I was so happy I donated to his paypal account.
#18
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,987
Total Cats: 359
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Any CAD software is difficult to use/understand, I guess it's the nature of the beast. Have you tried using Autocad or Solidworks?
Eagle in particular uses the QT framework, which of course looks different than a native Windows/Mac, but is by no means a '90s app. Using the QT framework means the same is available for all major platforms (win/mac/linux).
Eagle in particular uses the QT framework, which of course looks different than a native Windows/Mac, but is by no means a '90s app. Using the QT framework means the same is available for all major platforms (win/mac/linux).
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Solidworks is the easiest **** I've ever used in my life, I had the unfortunate experience of using solidedge for a pretty large assembly... till I figured out how to open solidedge parts in solidworks. More software should use UI like solidworks, I would be a happy man.
I've halfway trained myself on eagle using online tutorials, but the workflow isn't quite the same as feature/sketch based solid modeling where there's twenty ways to get what you want, although half can bite you in the bass...
My advice is forgo pcbexpress and go with eagle and oshpark, if it's something you enjoy doing the time you spend won't be wasted. Far as I can tell the UI hasn't changed in ever.
First and last time I had boards printed I bounced around a bunch of software till I discovered I was wasting more time than I was saving just learning eagle.
I've halfway trained myself on eagle using online tutorials, but the workflow isn't quite the same as feature/sketch based solid modeling where there's twenty ways to get what you want, although half can bite you in the bass...
My advice is forgo pcbexpress and go with eagle and oshpark, if it's something you enjoy doing the time you spend won't be wasted. Far as I can tell the UI hasn't changed in ever.
First and last time I had boards printed I bounced around a bunch of software till I discovered I was wasting more time than I was saving just learning eagle.
#20
Boost Pope
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Heck, before I move into a new apartment I first sketch it in AutoCAD and use that model to arrange my furniture. Saves a lot of time and sweat.