|
1 Attachment(s)
|
|
E36 dumps coolant on Road Atlanta's turn 4 causing destruction of an E30:
SpecE30 crash at Road Atlanta. The end of Stalwart #6. on Vimeo |
2 Attachment(s)
Originally Posted by Joe Perez
(Post 1063350)
edit: whoops, gotta get this back on top of the new page as well
https://www.miataturbo.net/attachmen...13646060_n-jpg |
1 Attachment(s)
there was a lost cat flyer on my mailbox today, so sad.
i googled the number and found a facebook post of it too: https://www.facebook.com/FreeLennoxN...51366428253312 https://www.miataturbo.net/attachmen...ine=1381956950 |
2 Attachment(s)
|
2 Attachment(s)
|
2 Attachment(s)
|
I wish that someone had told me years ago how fantastic this show was. Time to check out Deep Space 9, I suppose. http://fanboyfashion.com/wp-content/...be-Cosplay.jpg |
2 Attachment(s)
|
2 Attachment(s)
Originally Posted by Full_Tilt_Boogie
(Post 1063809)
Last night I finished watching STNG from the beginning. Took me a couple months.
I wish that someone had told me years ago how fantastic this show was. Time to check out Deep Space 9, I suppose. https://www.miataturbo.net/attachmen...ine=1381996206 https://www.miataturbo.net/attachmen...ine=1381996206 |
1 Attachment(s)
Originally Posted by Full_Tilt_Boogie
(Post 1063809)
Last night I finished watching STNG from the beginning. Took me a couple months.
I wish that someone had told me years ago how fantastic this show was. Time to check out Deep Space 9, I suppose. oddly, I have never watched the origonal star trek series. https://www.miataturbo.net/attachmen...ine=1382010000 |
2 Attachment(s)
Originally Posted by golftdibrad
(Post 1063838)
oddly, I have never watched the origonal star trek series.
It's also recently been re-mastered from a combination of the original camera negatives and workprints, with most (all?) of the SFX re-created in CG in a way that's actually not offensive as compared to what they did to Star Wars. They preserved the look and feel of the originals (right down to film grain) and just made it not look like cheaply-made 60s TV scifi. http://retrothing.typepad.com/photos...estored_01.jpg
Amazon.com: Star Trek: The Original Series - Season One (Remastered Edition): William Shatner, Leonard Nimoy, DeForest Kelley, James Doohan, George Takei, Walter Koenig, Nichelle Nichols: Movies & TV
If you knew where to look, and were not morally opposed to media piracy, you might find torrents of all three seasons that are well-seeded. Also, John Draper says hello: http://upload.wikimedia.org/wikipedi...hnDraprBNK.JPG |
1 Attachment(s)
Originally Posted by Full_Tilt_Boogie
(Post 1063809)
Last night I finished watching STNG from the beginning. Took me a couple months.
I wish that someone had told me years ago how fantastic this show was. https://www.miataturbo.net/attachmen...ine=1382014492 |
1 Attachment(s)
Originally Posted by Joe Perez
(Post 1063851)
It's campy, hokey, and fun.
It's also recently been re-mastered from a combination of the original camera negatives and workprints, with most (all?) of the SFX re-created in CG in a way that's actually not offensive as compared to what they did to Star Wars. They preserved the look and feel of the originals (right down to film grain) and just made it not look like cheaply-made 60s TV scifi. If you knew where to look, and were not morally opposed to media piracy, you might find torrents of all three seasons that are well-seeded. Also, John Draper says hello: https://www.miataturbo.net/attachmen...ine=1382015052 |
1 Attachment(s)
Jesus, if I wanted to watch Big Bang Theory, I'd turn on TBS.
https://www.miataturbo.net/attachmen...ine=1382015155 |
2 Attachment(s)
Originally Posted by Braineack
(Post 1063864)
Jesus, if I wanted to watch Big Bang Theory, I'd turn on
(Fuck TBS. Fuck them right in the goat-hole. Though I would also have accepted WGN.) So, in other news, here is a picture of the cheese counter from the little artisan grocer a few blocks from where I live: https://www.miataturbo.net/attachmen...1&d=1382017354 The aroma when you walk past that is intoxicating- I sometimes duck into the store just to walk past that counter. And yes, the man behind the cheese, his sole job is, in fact, to stand there and be knowledgeable about cheese. Those two swords hanging from the ceiling in front of him? They're not for decoration. They're for carving the huge cheese wheels in the glass case behind him. |
1 Attachment(s)
I must be one of the few who has watched every* episode of TNG in real time when it was originally broadcast
https://www.miataturbo.net/attachmen...ine=1382018228 *minus a few random episodes when I was held captive and forced to count lights. |
Like many of us, the Camaro entered its fourth decade carrying a little extra baggage. Thick in the haunches and laden with the obligatory accouterments of the modern automotive era, Chevrolet still managed to squeeze mind-blowing performance from it, namely in the form of the Camaro ZL1, a car that goes, stops, and turns better than any 4120-pound, 580-hp car has a right to. But for Al Oppenheiser, chief engineer of the Camaro program, that was just a warm-up. The next step in the shape-up plan was the Camaro SS 1LE, a lighter, tighter, track-tuned car, followed by the surprise appearance of the even more track-focused Z/28 at the New York auto show. Clearly, Mr. Oppenheiser is not only a man with a plan but also has the friends in high places to make it happen. To give us a taste of its most recent and lightest-weight efforts, Chevrolet invited us out to GM’s Milford Road Course to provide some ballast for a cadre of hot shoes for a Nürburgring-worthy workout in a trio of Z/28s. Hang Tight Moments into the first hot lap, it becomes apparent that grip was high on the list of the Z/28 team’s objectives. Halfway into the deeply dished turn affectionately known as “Pahrump 2” we’re pulling more than 1.00 g, and the chassis remains rock solid. Not only a test of the suspension, this corner was intentionally designed to starve engines of oil, a job it fails at miserably with the Z/28. While the driver and passenger strain to keep the horizon in their sights, the Z’s dry-sump system—the first ever in a production Camaro—remains unfazed, supplying the rotating assemblies of the 7.0-liter engine with a steady stream of motor oil. Speaking of the engine, it’s no secret the LS-7 was chosen because it’s 64 pounds lighter than the LSA found in the ZL-1. Producing 505 horsepower and 481 lb-ft of torque (10 more than it makes in the Corvette), its internals read like a who’s who of horsepower weekly: Mahle pistons, a K&N air intake, and Pankl titanium connecting rods. Oppenheiser says the connecting rods survived a 50-hour torture test running at redline with little to no wear. Z/28-specific exhaust headers are fitted, funneling into a 3.0-inch exhaust that tapers 2.75 inches at the rear. Engine oil is cooled by the same liquid-to-liquid system found in the Corvette ZR1. Word is all Z/28 engines will be built at the GM Performance Build Center in Bowling Green, Kentucky. Milford’s Nürburgring-like high-speed esses pass beneath us with nary a wiggle or twitch from the chassis. (Check out the Z/28’s 7-minute and 37-second run on the real Nürburgring here.) Much of the credit goes to the 305/30-ZR 19-inch Pirelli Trofeo R tires that reside at each corner. Wheel size is staggered slightly—19-by-11.0-inch front, 19-by-11.5-inch rear—to improve rear-tire handling at the limit. Chevrolet tells us going with the 19-inch tire-and-wheel package saves 48 pounds over a 20-inch setup and lowers the center of gravity by 1.29 inches. Engineers told us they were experiencing radical tire-bead slip to the tune of a full rotation or more during hot lapping, so they successfully devised a system of knurling the bead area to keep the tires tight. Engineer Mark Stielow says the wear pattern is surprisingly even, which speaks to the overall balance of the package. But the suspension isn’t just along for the ride; nearly every component has been reworked for the Z/28. Compared to a standard SS, the springs are a whopping 85-percent stiffer in front and 65-percent in the rear, and all of the bushings have been stiffened to improve steering feel and help achieve the car’s 1.08-g maximum lateral cornering figure. Interestingly, the team was able to fit smaller stabilizer bars, down from 28 to 25 mm in front, and 27 to 26 mm out back. Part of the change was made possible by the use of Multimatic DSSV (Dynamic Suspensions Spool Valve) dampers, which make their first appearance in a volume production vehicle in the Z/28. Essentially they trade shims used to tune traditional dampers for shaped ports. The result is improved transient response, thermal stability, minimal fade, easier and more predictable tuning via Multimatic’s proprietary software. Overall, the Z/28 has 190 unique parts in comparison to the SS. Shifty Motives and Private Diets Because of the engine’s prodigious output, hyperactive rowing of the close-ratio Tremec TR6060 six-speed transmission was not required to lap the circuit. When needed, however, the driver snicked them off easily, thanks to the combination of double- and triple-cone synchronizers on all gears. First gear in the Z/28 is a 2.66:1 ratio compared with a stock SS’s 3.01, all the gears following suit except for fourth, which is 1.00 for both cars. The rear end carries a 3.91:1 final-drive ratio (the SS’s is 3.45). Using a Torsen helical limited-slip instead of a traditional unit allows for the ABS to function for individual wheel sides and provides rapid torque coupling when powering out of a corner. This change alone cut 0.7 second off the car’s lap times at Milford. A liquid-to-liquid cooler similar to the one in the ZL1 cools both the transmission and the diff. Oppenheiser says a specific break-in plan will be outlined in the owner’s manual to ensure the powertrain and the driveline enter the world with performance and durability in mind. No opportunity to drop pounds from the Z/28 was overlooked. In addition to the aforementioned weight savings made with the engine and running stock, the team shaved 28 pounds by dumping the A/C (you can still get it as an option), 21.1 by fitting Brembo carbon-ceramic brakes, 10.3 by lightening the rear-seat assembly, 10.1 by omitting some sound deadening, and more through a variety of measures. All in, it weighs 300 fewer pounds than a Camaro ZL1. A specific front splitter, rear spoiler, hood vent, rockers, and fender-lip flares conspire to produce 440 more pounds of downforce at 150 mph than in the Camaro SS. Lapping the circuit during a cool-down lap, it’s clear that compromise wasn’t a part of the team’s agenda. The car is tight and free of the rattles that often plague track-focused vehicles. The Z/28’s best time on the Milford course is 1:53.71. That’s 2.87 seconds quicker than a ZL1 and 5.14 seconds quicker than the SS 1LE. And here’s where it gets personal: Engineers say the Z/28 betters their best lap time in a 2012 Mustang Boss 302 Laguna Seca by 5.34 seconds. (and $20k+ --sixshooter) Oppenheiser says they think they can sell 3000 to 4000 Z/28s over the next two to three years and figures the cars should start showing up in showrooms late in the first quarter of 2014. The Z/28 is expected to be pricier than the ZL1, but firm numbers haven’t been set. When your author asked Oppenheiser whether there is a driving principle that keeps him and his team on constant watch, he eloquently replied, “Yeah, to beat the shit out of anything Ford puts on the road. And that goes for the whole company from top to bottom.” |
4 Attachment(s)
Originally Posted by y8s
(Post 1063879)
I must be one of the few who has watched every* episode of TNG in real time when it was originally broadcast
*minus a few random episodes when I was held captive and forced to count lights. https://www.miataturbo.net/attachmen...1&d=1382020122 Also, I used this image recently in an email conversation with an old girlfriend who lives in FL, who used to be a Star Trek fan, and who was complaining about not being able to find such-and-such article of clothing for a Halloween costume: https://www.miataturbo.net/attachmen...1&d=1382025646 |
All times are GMT -4. The time now is 12:18 AM. |
|
© 2024 MH Sub I, LLC dba Internet Brands