|
I really enjoyed watching that yesterday.
|
dr!ft mode bro
|
A friend of mine just bought one. That thing MOVES, but he's not right in the head and has already bought an ECU, pistons, rods and other goodies.
At least I get his stock intercooler, if my suspicions are correct (varying info online) the inlet/outlet is spaced perfectly to go around the radiator+supports. If that's true then we could be looking at a decent source of cheap/good intercoolers. I'll know more next week when I get my hands on it. |
a friend of mine has one, and it's already tuned and he's trying a bunch of prototype parts for different companies on it. with just a catback, tune, upgraded wg actuator and bpv, it's making 330/400. essentially "stage1" .
their intercoolers suck past stock power levels. that's the next thing on his upgrade list. AIT's skyrocket past 5k at 18ish psi |
Ah damn, I just figured it would've been sufficient for a miata. On the other hand temp here rarely even touches 74°F
https://cimg9.ibsrv.net/gimg/www.mia...f498a78cf8.jpg |
it's probably ok to about 250whp so you might still be in luck.
what I've noticed about a lot of OEM intercoolers, is that they're really designed for a very specific flow/output. up til the "limit" they're excellent. as soon as you touch the limit, they just give up https://cimg9.ibsrv.net/gimg/www.mia...12a96860f5.jpg |
Glad to see you back, Commie!
Poor-quality pic, but I actually watched the left front wheel fall off of this lady's Chevy in real time. Lucky for her, it happened while she was pulling into a gas station somewhere in Ohio or Indiana. (Can't remember which.) Made a hell of a noise. https://cimg4.ibsrv.net/gimg/www.mia...b72978f623.png It's hard to tell from the potatophone image (I was quite some distance away), but the lug nuts are still in place, and the wheel is still attached to the hub. It's just that the hub is no longer attached to the chassis in any meaningful way. Also, all of this stuff actually fits into an NB: https://cimg9.ibsrv.net/gimg/www.mia...f37275cc72.png It was a bit of a squeeze, but I easily had room left over for one more water bottle, maybe even a pack of gum. |
Originally Posted by 18psi
(Post 1358991)
2016 Focus RS MK3 Drift Mode Epic Fail
https://cimg0.ibsrv.net/gimg/www.mia...96e5b6e4f8.jpg |
The guys at Vorshlag savaged the RS and said it is a total turd on the track. Apparently, the rear axle stuff overheats and shuts down after a few laps, which makes the car just a fatter and more powerful ST.
|
What did you use for steering on this thing?
Originally Posted by Godless Commie
(Post 1358843)
Moving it for the first time after completing the project.
https://cimg8.ibsrv.net/gimg/www.mia...5a03cb848e.jpg |
:likecat:
--- |
Originally Posted by Davezorz
(Post 1359092)
What did you use for steering on this thing?
One lever for each rear wheel brake. Worked great. |
Originally Posted by 18psi
(Post 1359021)
a friend of mine has one, and it's already tuned and he's trying a bunch of prototype parts for different companies on it. with just a catback, tune, upgraded wg actuator and bpv, it's making 330/400. essentially "stage1" .
their intercoolers suck past stock power levels. that's the next thing on his upgrade list. AIT's skyrocket past 5k at 18ish psi Small world, the guy tuning it, Travis, is a friend of mine. His bugeye Subaru that he drives at GTA events is pretty awesome. Up over 600awhp. |
Originally Posted by Girz0r
(Post 1359130)
https://www.miataturbo.net/attachmen...orted_vics.jpg |
i've done this. its shit. the secondary passage is WAY too short. upwards of 6.5k rpm. Havent you seen the vics manifold thread?
Originally Posted by Braineack
(Post 1359148)
I've been trying to get someone to modify a VICs manifold to do this for so long...
https://www.miataturbo.net/attachmen...orted_vics.jpg |
Originally Posted by triple88a
(Post 1359160)
i've done this. its shit. the secondary passage is WAY too short. upwards of 6.5k rpm. Havent you seen the vics manifold thread?
|
Originally Posted by Braineack
(Post 1359161)
I didn't know anyone actually dynoed it.
Here is what i want to do but dont have a welder. leave the vics chamber in place. Cut the top cover just above the runners and make the top runners shorter. |
Bushnell's Turtle, unsuccessfully attempted to sink the British ship Eagle during the revolutionary war:
https://cimg4.ibsrv.net/gimg/www.mia...808d21ed9.jpeg https://cimg5.ibsrv.net/gimg/www.mia...e9c9b68bf.jpeg |
Originally Posted by 18psi
(Post 1358991)
{broken youtube video}
Originally Posted by turbofan
(Post 1358992)
I really enjoyed watching that yesterday.
|
Originally Posted by EO2K
(Post 1359254)
And now I'm bummed I missed it :P
|
All times are GMT -4. The time now is 06:22 PM. |
|
© 2024 MH Sub I, LLC dba Internet Brands