Turbo Blankets!!!!
#43
Ok guys, I had talked about trying to set something up so we could get some of these nice turbo blankets for around $100 shipped. I got it all set up with Alamo and called and ordered 2 already. They are available in black and silver.
You can call them at 817-860-4300 and reference the "Kelly Deal" for the turbo blankets.
You can call them at 817-860-4300 and reference the "Kelly Deal" for the turbo blankets.
#44
Senior Member
Thread Starter
iTrader: (6)
Join Date: Mar 2005
Location: Sammamish, Washington
Posts: 1,396
Total Cats: 0
I don't know him personally. I bought a turbo blanket for my Miata there a year and a half ago. I figured I would set something up for the guys here. From talking to him on a phone a couple times he seems like a nice guy.
#50
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
I'll try to remember this weekend... I'll take one for you, but I dont use the internal gate on mine. It's the potato turbine housing welded shut. You *might* have issues with the rod. It's pretty big on there.
#53
Senior Member
Thread Starter
iTrader: (6)
Join Date: Mar 2005
Location: Sammamish, Washington
Posts: 1,396
Total Cats: 0
Yup.....MKIII. We have a crew of 4 of us that all have boosted Vr6 MKIII's in my area.
Also the blanket fits over a 16g turbo with ease. Just made a little slit for the actuator rod. Works perfectly. It should fit all internally wastegated turbos with the same mod.
Also the blanket fits over a 16g turbo with ease. Just made a little slit for the actuator rod. Works perfectly. It should fit all internally wastegated turbos with the same mod.
#58
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
I imagine you'd have issues with an internal wastegate. This thing sits pretty snug over the housing.
super huge pic: http://gallery.y8s.com/d/17047-1/DSC02741.JPG
You can see it pretty much fits down around the CHRA so I'm not sure where you'd run the WG actuator rod...
super huge pic: http://gallery.y8s.com/d/17047-1/DSC02741.JPG
You can see it pretty much fits down around the CHRA so I'm not sure where you'd run the WG actuator rod...
#60
Senior Member
Thread Starter
iTrader: (6)
Join Date: Mar 2005
Location: Sammamish, Washington
Posts: 1,396
Total Cats: 0
Rob at Flipside is running one on his internally gated 16g. He just made a small slit for the actuator rod and it works fine. Even better is how cool his brake fluid reservoir stays now.