M-Tuned Rods - Group Buy @ $349
#1
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've had some requests to run a group buy and have permission to do it based on sales of at least 10 sets! All Rods are in stock and ready to ship once we get the numbers we need.
M-Tuned Miata / Escort / 323 GTX Connecting Rods CRS-5230
- Forged Steel 4130 / 5230 H-Beam Connecting rods. CRS-5230
- H Beam Design for maximum strength
- Rods are aprox 470g each
- Comes with ARP 8740 3/8" Rod bolts
- Install and Spec sheet provided
- Comes with ARP moly lube for installation
- Finally a descent priced rod for the Miata / Escort / 323 Engines
- Compare to Carrillo H-Beam rods at $1090
- Tested to 600whp
Fits the following Motors:
- 90-93 Miata 1.6L B6
- 94-97 Miata 1.8L BP
- 99-03 Miata 1.8L BPW
- 91-95 Ford Escort GT 1.8L BP
- 323 GT / GTX / GTR 1.6L B6T or 1.8L BPT
- MX3 Precidia DOHC 1.6L 4cyl
GROUP BUY $349 + Shipping VISA or Mastercard for Payment.. No Paypal due to crazy fees.
Who is interested? Please post name and email so we can arrange a way to get your credit card info.
M-Tuned Miata / Escort / 323 GTX Connecting Rods CRS-5230
- Forged Steel 4130 / 5230 H-Beam Connecting rods. CRS-5230
- H Beam Design for maximum strength
- Rods are aprox 470g each
- Comes with ARP 8740 3/8" Rod bolts
- Install and Spec sheet provided
- Comes with ARP moly lube for installation
- Finally a descent priced rod for the Miata / Escort / 323 Engines
- Compare to Carrillo H-Beam rods at $1090
- Tested to 600whp
Fits the following Motors:
- 90-93 Miata 1.6L B6
- 94-97 Miata 1.8L BP
- 99-03 Miata 1.8L BPW
- 91-95 Ford Escort GT 1.8L BP
- 323 GT / GTX / GTR 1.6L B6T or 1.8L BPT
- MX3 Precidia DOHC 1.6L 4cyl
GROUP BUY $349 + Shipping VISA or Mastercard for Payment.. No Paypal due to crazy fees.
Who is interested? Please post name and email so we can arrange a way to get your credit card info.
Last edited by M-Tuned; 10-30-2008 at 09:00 AM.
#2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Not interested for this GB right now, but I'll go ahead and ask this since it isn't mentioned. What will shipping be to US people, give or take? Or will it be flat rate to US buyers? Instillation
Installation. Any pictures of these rods? Are the sets balanced to one another? IE, is each rod in the set guaranteed to be within some tolerance of the target weight?
![Does Not Equal](https://www.miataturbo.net/images/smilies/notequal.gif)
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Most? What? I would think that would be more like "guaranteed to be balanced to one another within X grams". I'm sure you're well aware of how important balancing can be when building an engine. If I were to buy rods, I'd like to know the set will be very well balanced. Most are sets are guaranteed to all be within 2 grams of one another. Less is better of course. Can you not offer them in sets that are within 2 grams of one another? (ie, not + or - 2 grams of target weight as that's would be a 4 gram spread.)
Last edited by patsmx5; 10-30-2008 at 11:15 AM.
#5
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Pat - I've personally purchased 3 other kinds of Miata rods for various engines I built for my old Drag car. ($600+$1000 Rods) None of them were guaranteed, and all recommended I have my entire rotating assembly balanced by a professional builder.
I've also had a set of cheaper guaranteed within 2 grams rods in my hands and I can assure you on my scale they were not, and that the owner had to ship them back at his own expense and then pay shipping again if he was infact to get another set.
I'm not going to offer a guarantee on something that I can't get backed by the company producing them, and I am not going to promise something I have no intentions of delivering on. (As in the example above)
Hope this makes sense..
I've also had a set of cheaper guaranteed within 2 grams rods in my hands and I can assure you on my scale they were not, and that the owner had to ship them back at his own expense and then pay shipping again if he was infact to get another set.
I'm not going to offer a guarantee on something that I can't get backed by the company producing them, and I am not going to promise something I have no intentions of delivering on. (As in the example above)
Hope this makes sense..
#6
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just spoke to my Rod producer and he told me this..
Their Weight control is within ± 2 grams.
Sounds pretty close to what I have seen in the past when looking at the sets on my scale.
Their Weight control is within ± 2 grams.
Sounds pretty close to what I have seen in the past when looking at the sets on my scale.
#7
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just for kicks I weighed the (ETD) rods I bought from you last spring and each one is 525grams with the rod bolts. No weight variance in any of them.
Head/valve issues aside, what would be considered a maximum safe RPM with these rods? When I build my motor it is primarily for a strong SM2 car. Our longer courses have me constantly hitting the rev limiter and a thousand or more RPM would really help.
Head/valve issues aside, what would be considered a maximum safe RPM with these rods? When I build my motor it is primarily for a strong SM2 car. Our longer courses have me constantly hitting the rev limiter and a thousand or more RPM would really help.
#10
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![](https://www.miataturbo.net/images/smilies/smile.gif)
![](https://www.miataturbo.net/images/smilies/smile.gif)
#11
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've rev'd a set of rods from the same supplier we use in one of my B18 Honda engines to 10000rpm at 600hp. I was drag racing and needed the extra RPM as I had the wrong tranny on the car. Ran it like that all day, and put the motor in a local guys street car. Still running 2 years later!
#13
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I won't say their rods are crap, but I will stand behind our rods as been an excellent rod and will put them head to head against any other off the shelf Miata Rod, but at 1/2 the price
![](https://www.miataturbo.net/images/smilies/smile.gif)
Plus the sets are in Canada and ready to ship to you in Quebec, or to our US customers (95% of our business is USA)