GB on Devils Own WI.
#1
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
GB on Devils Own WI.
Stage 1
* Adjustable Pressure Switch
* No loss in pressure even with high volumes
* Dry run up to 1 hour
* Methanol-compatible
* EPDM Diaphragm High Volume pump
* 150PSI
$196 shipped
Stage 2
* Completely adjustable digital progressive controller
* 150 psi Shurflo pump with EPDM seals for up to 50% methanol
* Heavy duty nickel plated check valve
* 15 ft of black high pressure nylon tubing
* 2 Nickel plated nozzles 5,7
* All necessary hardware
$288 shipped
For more information visit Devils Own website.
We need 15 people to do this, already have 3 committed.
I am not in on this groupbuy as my funds don't permitt it, sorry guys.
Let me know who is interested.
Thanks
Dan
* Adjustable Pressure Switch
* No loss in pressure even with high volumes
* Dry run up to 1 hour
* Methanol-compatible
* EPDM Diaphragm High Volume pump
* 150PSI
$196 shipped
Stage 2
* Completely adjustable digital progressive controller
* 150 psi Shurflo pump with EPDM seals for up to 50% methanol
* Heavy duty nickel plated check valve
* 15 ft of black high pressure nylon tubing
* 2 Nickel plated nozzles 5,7
* All necessary hardware
$288 shipped
For more information visit Devils Own website.
We need 15 people to do this, already have 3 committed.
I am not in on this groupbuy as my funds don't permitt it, sorry guys.
Let me know who is interested.
Thanks
Dan
#6
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
I fidangled some **** to get a screaming deal. It is off the shelf crap as I am flipping the house (should be on the market mid April). But I ran across a bunch of blinds at this salvage store, and turns out I got a bunch of wrong sizes, went to HD and saw they have the same brand, exchanged it for proper sizing and they cut it for me. It's not the cheapest ****, its a step up. No offense taken, I know the difference between these and custom blinds, the stuff I have is crap, but it does what I need it to do.
Anyways, turned out about $90 for 8 various sized (mostly 72x72) windows and one 104" window (vertical blinds here). I could not pass on that.
/own threadjack
Anyways, turned out about $90 for 8 various sized (mostly 72x72) windows and one 104" window (vertical blinds here). I could not pass on that.
/own threadjack
#13
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
Jay-I will know shortly, sorry, forgot about ya'll up there.
Or I could just stick with Rafas solution lol.
94red-yes, that is it.
Rafa, give them a break, DO does not ship from the DR
Kelly-I was told it is through DO directly.
Sorry man, am I stepping on your toes?
Or I could just stick with Rafas solution lol.
94red-yes, that is it.
Rafa, give them a break, DO does not ship from the DR
Kelly-I was told it is through DO directly.
Sorry man, am I stepping on your toes?
#16
That's right, calling you out.
Srsly, treat it like a safety blanket. Don't go crazy with it. This is what I plan on doing. I just finished putting a motor in four months ago, don't plan on doing it again this November.
I'm going to go light with the water, just to pick up a little timing, and feel better about the setup and -stock- rods.
#20
Elite Member
Thread Starter
iTrader: (39)
Join Date: Sep 2007
Location: High Point NC
Posts: 4,850
Total Cats: 8
Sorry guys, I had to withdraw.
There was some missunderstanding etc. and I have no more free time so I can not go through with this at this time. My advice, just keep checking ebay for deals...
Good luck
There was some missunderstanding etc. and I have no more free time so I can not go through with this at this time. My advice, just keep checking ebay for deals...
Good luck
Thread
Thread Starter
Forum
Replies
Last Post