What to fix on my Fuel System?
#84
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yep, happened multiple times. I think it's when people have residual pump gas or when they go to different stations and one has min e70 and one min 85, which can swing the ethanol content by as much as 10-20%. I also hear that in other states the blend changes pretty significantly between summer/winter
Just set up EGO corr table to allow room for it and you should be fine.
On some of the OEM ecu's we tune we don't have closed loop in boost luxury, which is why many stay on the rich side
Just set up EGO corr table to allow room for it and you should be fine.
On some of the OEM ecu's we tune we don't have closed loop in boost luxury, which is why many stay on the rich side
EGO is setup and working.
Like I said, new to E85, so taking things slow and learning. Thanks for the advice everyone, I do appreciate it.
#87
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Implementing flex fuel is still a very good idea for a car that will be using pump E85 that can change without notice. Having the ECU be able to make adjustments for even the differences between E70 and E85 is definitely a good thing. Not to mention there's always a chance of getting a really low concentration batch. People/gas stations make mistakes.
#88
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Its relatively cheap with an MS3. I bet you could get it done for less than ~100. And it works well from what I've heard from @yank. I plan on implementing it soonish.
#89
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Sorry this took forever, but here's a VD finally.
AFRs are plotted in the VD, but they varied from 11.0 to 12.0 between the various runs as I got the fuel dialed in from 11.0 to 12.0. VD seems to vary enough run to run that it didn't really show much difference. In the 1/8 mile, I gained a few MPH going from 11.0 to 12.0 AFRs though, so I know it helps. I got a feeling I need to add timing now. At 10.5-11.0 AFRs, the plugs and knock sensor both showed knock with any more timing than I have it running now. I suspect it will take more timing now, will test in the near future. Only 18 degrees at 7,000 right now...
Fuel on this log is at 85% duty cycle at 7,700 RPMs.
![Name: VD%2011.22.2015_zps0lpxgv3c.jpg
Views: 93
Size: 74.7 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/183842d1501206149-what-fix-my-fuel-system-vd%252011.22.2015_zps0lpxgv3c.jpg)
![Name: log%20for%20VD_zpsdj9wgwcn.png
Views: 105
Size: 230.7 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/183843d1501206149-what-fix-my-fuel-system-log%2520for%2520vd_zpsdj9wgwcn.png)
Vid at the track, had a boost leak so only 17 PSI but it's something.
Thoughts? I think it should be making more power.
AFRs are plotted in the VD, but they varied from 11.0 to 12.0 between the various runs as I got the fuel dialed in from 11.0 to 12.0. VD seems to vary enough run to run that it didn't really show much difference. In the 1/8 mile, I gained a few MPH going from 11.0 to 12.0 AFRs though, so I know it helps. I got a feeling I need to add timing now. At 10.5-11.0 AFRs, the plugs and knock sensor both showed knock with any more timing than I have it running now. I suspect it will take more timing now, will test in the near future. Only 18 degrees at 7,000 right now...
Fuel on this log is at 85% duty cycle at 7,700 RPMs.
![Name: VD%2011.22.2015_zps0lpxgv3c.jpg
Views: 93
Size: 74.7 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/183842d1501206149-what-fix-my-fuel-system-vd%252011.22.2015_zps0lpxgv3c.jpg)
![Name: log%20for%20VD_zpsdj9wgwcn.png
Views: 105
Size: 230.7 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/183843d1501206149-what-fix-my-fuel-system-log%2520for%2520vd_zpsdj9wgwcn.png)
Vid at the track, had a boost leak so only 17 PSI but it's something.
Thoughts? I think it should be making more power.
#90
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It's timing related for sure, though there could also be something else that's a bottle neck too.
I swapped pulleys and got the boost up to 26 PSI at 6,900 now.
Then I started messing with the timing a bit, and adding 1.5* of timing at 5,000 RPMs showed a 30 ft*lb gain in torque.
Pretty safe to say I'm not a MBT yet. I'll throw some new plugs in it and try to get the timing dialed in next.
Oh yeah, 259 ft*lbs of torque at 4,800
I swapped pulleys and got the boost up to 26 PSI at 6,900 now.
Then I started messing with the timing a bit, and adding 1.5* of timing at 5,000 RPMs showed a 30 ft*lb gain in torque.
![Idea](https://www.miataturbo.net/images/smilies/sign0184.gif)
Oh yeah, 259 ft*lbs of torque at 4,800
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
#92
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The problem is the oil case is running 160*F hotter than ambient with this 2.59:1 pulley, vs 100*F over ambient with the 2:1 pulley. I'm going to try removing some of the oil from the oil case and retesting to see if less oil drops the oil case temps. That's about the only thing I haven't tried that might help.
If I can get the SC happy, then I'll plan to keep the pulley for now and get back to working on the timing. The car is silly in 1st/2nd with this pulley and sticky tires.
#95
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
For reference, I found a document from KenneBell (I have a whipple though) and they require (not recommend) dropping a 1/4 to 3/8" off the oil level for high boost/race applications to lower oil case temps. Whipple does not, but I think they should and thus plan to test this.
Yes, oil case of the supercharger where the gears are. I could do an oil cooler, but it would be very expensive to do. Minimum I'd need some fittings, hose, heat exchanger, pump, and oil. The oil the Whipple takes cost 26 dollars/4 oz = 208 dollars/qt.
#97
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The SC gets the hottest while at sustained highway cruise. At 3,100 RPMs, the oil case is 100*F over ambient with the 2:1 pulley, 150-160*F over ambient with the 2.59:1 pulley. Sustained highway speeds get the SC the hottest as it's spinning fast, but very little mass flow of air is going through it to cool it. When you open the throttle, it sucks in tons of cool air and temps drop.
I only dropped the redline of the motor to 6,900 because the new pulley ration puts the SC at 18,000, it's max continuous RPM rating with the 2.59 pulley. The 2:1 pulley would let me rev to 9,000 before hitting the 18,000 limit.
I only dropped the redline of the motor to 6,900 because the new pulley ration puts the SC at 18,000, it's max continuous RPM rating with the 2.59 pulley. The 2:1 pulley would let me rev to 9,000 before hitting the 18,000 limit.
#100
Elite Member
Thread Starter
iTrader: (16)
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,339
Total Cats: 519
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Also, I dropped the oil level 1/4", the oil temp delta-T over ambient dropped a solid 20*F. The compressor was actually 40*F hotter on the second test, yet oil temps were STILL 20*F lower. So less oil definitely helped. Had the compressor been the same temp as before, the oil case delta-T would have likely been even better.
EDIT: Oh yeah, 267 ft*lbs at 4,200 RPMs now.
![](https://www.miataturbo.net/images/smilies/smile.gif)