slave cylinder or throw out bearing?
#1
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
slave cylinder or throw out bearing?
When I push the pedal in...it clanks loudly (felt through the pedal too) and won't disengage the clutch. The master is full of fluid, however the slave is covered in fluid/dirt.
I thought it was the throw out because it feels like **** through the pedal, but maybe / hopefully I'm wrong.
I thought it was the throw out because it feels like **** through the pedal, but maybe / hopefully I'm wrong.
#8
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
now when I push he clutch in, I get no strange noise or feel. I'm guessing its a slave, but the little piston is moving. I need to look inside the trans and see if the arm is moving.
full master cylinder
normal pedal feel at idle
pumping the pedal changes nothing
no weird noises
the visible piston at the slave cylinder moves like 2"
full master cylinder
normal pedal feel at idle
pumping the pedal changes nothing
no weird noises
the visible piston at the slave cylinder moves like 2"
#13
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I have to drive it 3 hours home, which is not big deal since its all in 5th...but I have to drive like 45 minutes each way into town to get my clutch, then to my shop to replace it. Hopefully I can do this **** in about 4 hours. I can do the trans in my vw out and back in, in 90 minutes.
#17
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
nah, I can do it, as long as I don't have to completely stop the car anywhere other than a hill in my favor. I'm in Oklahoma City and it would cost a fortune to tow it to dallas in fuel alone with my fathers 53' trailer.
I'm tired of working on cars. I just put a trans and rear beam in my vw, and re-loomed the car after the electrical fire.
I'm tired of working on cars. I just put a trans and rear beam in my vw, and re-loomed the car after the electrical fire.
#18
Bringing this back from the dead.
I searched multiple threads about clutch issues, and this came closest to what I am experiencing right now.
I changed out the master cylinder, slave and even replace the clutch line with a 949 line. PO replaced the clutch with a ACT HD at 107k miles, car is at 137k now.
Anyway, anyone ever had this problem and fixed it? HUSTLER?
I searched multiple threads about clutch issues, and this came closest to what I am experiencing right now.
I changed out the master cylinder, slave and even replace the clutch line with a 949 line. PO replaced the clutch with a ACT HD at 107k miles, car is at 137k now.
Anyway, anyone ever had this problem and fixed it? HUSTLER?