Really cheap 7" upgrade
#7
I've got 2 cars with these installed in them. Light output is good, crisp cutoff, a little on the blue side of white. If you have a headlight bucket that shakes, this'll amplify it. The ones I have were factory f'ups that had the alignment tabs cast in the wrong place, had to cut them down with a grinder. On top of that, whoever they hired to crimp the wire ends was having a bad day - 1 wired was crimped into insulation and nonfunctional, another pair had the wires installed in the wrong order in the harness. Simple enough to repin, and definitely worth $75. H13 -> H4 adapters were included in my order, but I don't see the option for it on this page.
http://www.mx5atlanta.com/forums/sho...super-closeout!
http://www.mx5atlanta.com/forums/sho...super-closeout!
#12
If these had have been available at this price when I had an NA I would not have bought Cibies, which cost me the same as these LEDs before making a relay setup. I also wouldn't screw around with any Halogens that weren't E-codes, and you can't get E-codes for $30
Other LED 7" headlights look to be pretty good. Why don't you take the plunge and find out for the rest of us?
Other LED 7" headlights look to be pretty good. Why don't you take the plunge and find out for the rest of us?
#14
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
If these had have been available at this price when I had an NA I would not have bought Cibies, which cost me the same as these LEDs before making a relay setup. I also wouldn't screw around with any Halogens that weren't E-codes, and you can't get E-codes for $30
Other LED 7" headlights look to be pretty good. Why don't you take the plunge and find out for the rest of us?
Other LED 7" headlights look to be pretty good. Why don't you take the plunge and find out for the rest of us?
#20
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,011
Total Cats: 859
nb1-morimoto-hid-nb2-projectors
Maybe we can revive it and get some input?
@MetalMuffins, care to contribute? I think @Godless Commie did some sort of conversion as well, before the Mini's came out.