Quick question about coolant temps. and the t-stat...
#21
Perhaps TOO effective, as too cold can have an adverse effect on engine longevity.
After I installed mine, I logged many different types of runs on my MegaSquirt, and I had the same results as you.
On one cold morning (approx 15-18 degree celcius), cruising down the highway for about 10minutes, I saw my needle drop to less than 1/3 position.
But once the speed slowed and we started driving around suburban streets, it slowly rose back up to around 10'o-clock position, then settle to a little less than the usual 11'o-clock.
Nothing much to worry about in my opinion, but if runnig too cold is a concern, then do what I do and install a protective, but still free-flowing, grille during winter to impede air-flow a little.
#22
Elite Member
Thread Starter
iTrader: (12)
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 6,850
Total Cats: 71
why not 3rd factor... that the re-route is working very effectively?
Perhaps TOO effective, as too cold can have an adverse effect on engine longevity.
After I installed mine, I logged many different types of runs on my MegaSquirt, and I had the same results as you.
On one cold morning (approx 15-18 degree celcius), cruising down the highway for about 10minutes, I saw my needle drop to less than 1/3 position.
But once the speed slowed and we started driving around suburban streets, it slowly rose back up to around 10'o-clock position, then settle to a little less than the usual 11'o-clock.
Nothing much to worry about in my opinion, but if runnig too cold is a concern, then do what I do and install a protective, but still free-flowing, grille during winter to impede air-flow a little.
Perhaps TOO effective, as too cold can have an adverse effect on engine longevity.
After I installed mine, I logged many different types of runs on my MegaSquirt, and I had the same results as you.
On one cold morning (approx 15-18 degree celcius), cruising down the highway for about 10minutes, I saw my needle drop to less than 1/3 position.
But once the speed slowed and we started driving around suburban streets, it slowly rose back up to around 10'o-clock position, then settle to a little less than the usual 11'o-clock.
Nothing much to worry about in my opinion, but if runnig too cold is a concern, then do what I do and install a protective, but still free-flowing, grille during winter to impede air-flow a little.
See above reply to why my needle was all over the place. The spacer was insulating the ground for the temp sensor. I don't know if this is an issue for 90-93 or 94-97....but for 99-05 you will need to add a ground from the spacer to the head.
#24
Ah ha! Voctory is mine!
Even after I rewired the extension and made sure all wires connections were nice and tight, I was still having the issue..although the needle spent less time on "C". So thismorning before I left work, I had idea. I thought about how the spacer is now sandwiched between two gaskets..which act as insulators and maybe the sensor needs a ground. I mean, in stock forum the bolts holding the neck to the head act as grounds and with the spacer the bolts don't. So after grounding the spacer to the head, the temp. gauge worked perfectly normal on my way to work today. Finally. I win.
Even after I rewired the extension and made sure all wires connections were nice and tight, I was still having the issue..although the needle spent less time on "C". So thismorning before I left work, I had idea. I thought about how the spacer is now sandwiched between two gaskets..which act as insulators and maybe the sensor needs a ground. I mean, in stock forum the bolts holding the neck to the head act as grounds and with the spacer the bolts don't. So after grounding the spacer to the head, the temp. gauge worked perfectly normal on my way to work today. Finally. I win.
#25
Yeah nice work on the findings! I'll cheat and find a ring terminal I can fit over the thread of the temp sensor, then ground that.
Makes me wonder how many people are thinking "holy **** batman, this coolant reroute is winner!" when in fact they've just broken their gauge.
OZMX-5 - Have a think about it; your car won't do that if you have a working thermostat.
Makes me wonder how many people are thinking "holy **** batman, this coolant reroute is winner!" when in fact they've just broken their gauge.
OZMX-5 - Have a think about it; your car won't do that if you have a working thermostat.
#26
why not 3rd factor... that the re-route is working very effectively?
Perhaps TOO effective, as too cold can have an adverse effect on engine longevity.
After I installed mine, I logged many different types of runs on my MegaSquirt, and I had the same results as you.
On one cold morning (approx 15-18 degree celcius), cruising down the highway for about 10minutes, I saw my needle drop to less than 1/3 position.
But once the speed slowed and we started driving around suburban streets, it slowly rose back up to around 10'o-clock position, then settle to a little less than the usual 11'o-clock.
Nothing much to worry about in my opinion, but if runnig too cold is a concern, then do what I do and install a protective, but still free-flowing, grille during winter to impede air-flow a little.
Perhaps TOO effective, as too cold can have an adverse effect on engine longevity.
After I installed mine, I logged many different types of runs on my MegaSquirt, and I had the same results as you.
On one cold morning (approx 15-18 degree celcius), cruising down the highway for about 10minutes, I saw my needle drop to less than 1/3 position.
But once the speed slowed and we started driving around suburban streets, it slowly rose back up to around 10'o-clock position, then settle to a little less than the usual 11'o-clock.
Nothing much to worry about in my opinion, but if runnig too cold is a concern, then do what I do and install a protective, but still free-flowing, grille during winter to impede air-flow a little.
.... yeah.
Thread
Thread Starter
Forum
Replies
Last Post