P0246 Wastegate Solenoid High Voltage
#1
P0246 Wastegate Solenoid High Voltage
Hey all - We have an MSM, stock, driven for autocross only.
About a month and a half ago the CEL came on: P0246 - Turbocharger Wastegate Solenoid 1 High Voltage
The car runs fine, and seems to boost fine as well from what I can tell - though I suppose it may just be on spring pressure now?
Is this a common issue, and is it likely actually a bad solenoid?
Thanks!
About a month and a half ago the CEL came on: P0246 - Turbocharger Wastegate Solenoid 1 High Voltage
The car runs fine, and seems to boost fine as well from what I can tell - though I suppose it may just be on spring pressure now?
Is this a common issue, and is it likely actually a bad solenoid?
Thanks!
#6
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
No point in hoping, test it and find out. Check the harness for 12v, the negative will
come from the ecu. Then give the solenoid 12v and a ground from a battery, and see
if flow starts/stops
come from the ecu. Then give the solenoid 12v and a ground from a battery, and see
if flow starts/stops
Thread
Thread Starter
Forum
Replies
Last Post