Oil pump o ring/gasket
#1
Oil pump o ring/gasket
I just fitted my oil pump to my rebuilt bottom end.
The oil pump had a gasket and a o ring. I put the o ring in the pump then offered up the gasket. The gasket actually covers the o ring soooo
The o ring seals to the gasket
The gasket seals to the block
I applied a thin bit of sealant on the pump then put the o ring in and put a little sealant on top of that to seal it to the gasket, then sealant on the block and torqued it all up
Is this correct?
Seems odd that the o ring seals to a gasket.
The oil pump had a gasket and a o ring. I put the o ring in the pump then offered up the gasket. The gasket actually covers the o ring soooo
The o ring seals to the gasket
The gasket seals to the block
I applied a thin bit of sealant on the pump then put the o ring in and put a little sealant on top of that to seal it to the gasket, then sealant on the block and torqued it all up
Is this correct?
Seems odd that the o ring seals to a gasket.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM