Need a Guru
#1
Elite Member
Thread Starter
iTrader: (11)
Join Date: Apr 2007
Location: VA Beach
Posts: 1,998
Total Cats: 51
Need a Guru
Just did a HG on a friends 1991. He blew HG ans over heated it. He told me he saw it get hot than the lower rad hose broke.
Tore it down and had the head milled replaced the bad gasket and its back together and runs fine. My question is about the temp sensor on the dash board is not working and it was before I did this hob. The temp sensor on the back of the head with the two wire plug was cracked when I took it off so I replaced it. Thats the one for the dash gauge...right???
The only other thing I can think it could be is there is a single wire plug coming out of the wiring harness where the coil pack plug, O2 sensor come from that does not seem to plug into anything. Whats it go to?
Tore it down and had the head milled replaced the bad gasket and its back together and runs fine. My question is about the temp sensor on the dash board is not working and it was before I did this hob. The temp sensor on the back of the head with the two wire plug was cracked when I took it off so I replaced it. Thats the one for the dash gauge...right???
The only other thing I can think it could be is there is a single wire plug coming out of the wiring harness where the coil pack plug, O2 sensor come from that does not seem to plug into anything. Whats it go to?
Thread
Thread Starter
Forum
Replies
Last Post
TheScaryOne
Miata parts for sale/trade
1
08-14-2014 06:35 PM
thagr81 us
Suspension, Brakes, Drivetrain
83
02-15-2010 06:52 PM