Is my setup ready to go?
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Detroit
Posts: 1,234
Total Cats: 0
Is my setup ready to go?
Well, I think I have finally come to an end in sorting out my complete system. I'm ready to start working on it and I want to run everything by you guys to make sure I'm on the right track.
My goal is to get this damn thing done. Maybe 200hp, anything higher is great. I don't want a full out race car, I do DD the car in the summer, but I'm willing to get close.
93 1.6, long nose, 64K, good comp #'s, everything checks out fine.
no A/C, PS will be removed
Things installed
Greddy manifold & turbo.
Braided feed and return, tapped pan
Turbo Tony dp, full 2.5" exhaust, dynomax turbo muffler
Dual feed rail
Starion intercooler
Innovate WB
Turbo XS typeS BOV
Things to be installed
Stripes intercooler pipes
1.8 open rear end
MSnS- Kingof1337 setup
Things I'm researching
Injectors (460 or 5xx)
Intercooler (size)
GodSpeed rad
clutch (upgrade to 1.8 or keep 1.6, brand etc.)
I THINK thats everything. Again, any advice anyone can give me is appreciated. I'm hoping to finish it this year.
My goal is to get this damn thing done. Maybe 200hp, anything higher is great. I don't want a full out race car, I do DD the car in the summer, but I'm willing to get close.
93 1.6, long nose, 64K, good comp #'s, everything checks out fine.
no A/C, PS will be removed
Things installed
Greddy manifold & turbo.
Braided feed and return, tapped pan
Turbo Tony dp, full 2.5" exhaust, dynomax turbo muffler
Dual feed rail
Starion intercooler
Innovate WB
Turbo XS typeS BOV
Things to be installed
Stripes intercooler pipes
1.8 open rear end
MSnS- Kingof1337 setup
Things I'm researching
Injectors (460 or 5xx)
Intercooler (size)
GodSpeed rad
clutch (upgrade to 1.8 or keep 1.6, brand etc.)
I THINK thats everything. Again, any advice anyone can give me is appreciated. I'm hoping to finish it this year.
Last edited by miataspeed1point6; 01-17-2008 at 08:59 PM.
#8
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Detroit
Posts: 1,234
Total Cats: 0
Starion = ******* stupid ghetto setup*. Under the radiator, Radiator hose couplers and JB weld. Can't wait to get it off.
*If this is all you can afford, I don't mean to offend. I started out with it to. On a side note, anyone want to buy my starion kit? It has some upgrades, silicon couplers, BOV bung. PM me.
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM