Looking for rec's on gauges
#1
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Looking to pick up the following gauges:
Electric:
Pyrometer to 2000F
Oil Temp
Water Temp
Oil Pressure
Clock
Fuel level
Mechanical:
Vac/Boost to 20 psi
Also, either a Voltmeter or Ammeter, because I'll have 1 more available spot...
I'm looking for a simple to read gauge, black face and black bezel. So far I like the Autometer Z series, but the only draw back is the pyrometer goes to 1600F.
Any suggestions or recommendations?
Autometer Z:
Electric:
Pyrometer to 2000F
Oil Temp
Water Temp
Oil Pressure
Clock
Fuel level
Mechanical:
Vac/Boost to 20 psi
Also, either a Voltmeter or Ammeter, because I'll have 1 more available spot...
I'm looking for a simple to read gauge, black face and black bezel. So far I like the Autometer Z series, but the only draw back is the pyrometer goes to 1600F.
Any suggestions or recommendations?
Autometer Z:
![](http://www.autometer.com/img/products/2632_d.jpg)
#3
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've got the molded 3 gauge pillar coming from miataroadster
There's room for 3 gauges in the stock cluster in place of the OP, Temp, and Fuel gauges (I'm thinking water temp, boost, then oil temp left to right)
Then 3 more where my A/C controls are, after I do the NB climate control swap
Right now I've got a couple of white face autometer gauges (Phantom comes to mind but I dunno), which work fine enough, but I don't care for white face.
There's room for 3 gauges in the stock cluster in place of the OP, Temp, and Fuel gauges (I'm thinking water temp, boost, then oil temp left to right)
Then 3 more where my A/C controls are, after I do the NB climate control swap
Right now I've got a couple of white face autometer gauges (Phantom comes to mind but I dunno), which work fine enough, but I don't care for white face.
#8
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
uhm I have no issues with my current autometer gauges. I can see them just fine, no matter the lighting. I just do not care white gauge faces, especially with the car's black face gauge cluster.
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Have you looked at VDO Vision? Black face, simple OEM style look, and easy to read. I'll get some pictures up later of how I did them in my NX2000, including integrating the boost gauge in the stock cluster in place of the water temp gauge.
C
C
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'e had lots of luck with isspro gauges.. i recommed them over Autometer every time..
http://www.isspro.com/
http://www.isspro.com/