Here we go again. Morons at that MSM forum
#42
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Do you ******* morons read? I said, DYNO TUNING IS GOOD!!!!. What you ******* asshats don't get, or could not or refuse to comprehend is, some people, especially those that don't race for a ******* living is fine with close!!!! I am one of those in "SOME CASES" case in point. My MSM is a street driven car, wont likely go to the track for anything other than some fun laps at VIR. In this case, autotune and a few tweaks is good enough for what I use the car for. Could I get more power on the dyno with a good tuner..YES!!!! but I don't care because I don't need it, it's not a concern for me, and I don't give a ****, I have other faster cars that are my priority. The current power levels are fine for what I am doing with the car. The guy you ******* are calling moron has an atom (or 3) which is where his priorities are, his MSM is an after thouoght. I also find it funny that some of you stupid ************* get a ******* miata and finally figure out how to turn a wrench or two, and all of a sudden you are automotive geniuses. Hustler, you should really STFU, you don't know **** with that POS raggady *** **** you have..Is this you first build? Did you see me say anything about "feeling 3,4,5 HP, NO!, and if you can't ******* here detonation you need to go back to ground zero. As far as people tuning at the track being morons, there are a lot of morons around, a lot of people tune at the track. Maybe you should actually go to a ******* track you ******* moron. Have you ever put togther any other car other than a ******* miata? Honda's civics don't count.
Guy here worked on the LG Motorsports C6R Vette...does that count? We have built a few race cars, rally cars, etc.
The only thing you should be doing on the track is making small adjustments for humidity and temperature. 99.9% of the tune is done on a dyno, both engine and wheel/hub dynos. Then you make SMALL adjustments to get a tad bit more under the current conditions at the track. Most teams also have atrained and experienced tuner, not just a mechanic playing with the numbers.
#44
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Do you ******* morons read? I said, DYNO TUNING IS GOOD!!!!. What you ******* asshats don't get, or could not or refuse to comprehend is, some people, especially those that don't race for a ******* living is fine with close!!!! I am one of those in "SOME CASES" case in point. My MSM is a street driven car, wont likely go to the track for anything other than some fun laps at VIR. In this case, autotune and a few tweaks is good enough for what I use the car for. Could I get more power on the dyno with a good tuner..YES!!!! but I don't care because I don't need it, it's not a concern for me, and I don't give a ****, I have other faster cars that are my priority. The current power levels are fine for what I am doing with the car. The guy you ******* are calling moron has an atom (or 3) which is where his priorities are, his MSM is an after thouoght. I also find it funny that some of you stupid ************* get a ******* miata and finally figure out how to turn a wrench or two, and all of a sudden you are automotive geniuses. Hustler, you should really STFU, you don't know **** with that POS raggady *** **** you have..Is this you first build? Did you see me say anything about "feeling 3,4,5 HP, NO!, and if you can't ******* here detonation you need to go back to ground zero. As far as people tuning at the track being morons, there are a lot of morons around, a lot of people tune at the track. Maybe you should actually go to a ******* track you ******* moron. Have you ever put togther any other car other than a ******* miata? Honda's civics don't count.
My car is far from raggady. Most people who see it comment on how ******* perfect the car is. I mean ****, I only bought the best of the best, every wire is soldered with loom, every clamp is stainless, every gauge is special-ordered Omori, matching everything, 3 sets of 6ULs in my possession, every bolt is anodized, and it should be considering I now have $20k in a miata. I don't give a **** if your Buick was made this decade, my **** is cleaner, faster, lighter, and did I mention faster?
Your detonation statement is inaccurate. I could hear slight detonation with headphones, that I could not hear in the car...and my ears are really ******* big, like my genitals. Ask your ***** girlfriend who my buddies and I "trained" last weekend. This was after I returned from another classified mission to "neutralize" some issues in the Pacific Rim, so I suggest you NEVER type to me in caps again because its rude and I take respect seriously. Final warning.
p.s. thanks for the advice on my sister's msm. She did the 2.5", gained lots of power, and 1k rpm earlier spool.
#46
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hmm....
Guy here worked on the LG Motorsports C6R Vette...does that count? We have built a few race cars, rally cars, etc.
The only thing you should be doing on the track is making small adjustments for humidity and temperature. 99.9% of the tune is done on a dyno, both engine and wheel/hub dynos. Then you make SMALL adjustments to get a tad bit more under the current conditions at the track. Most teams also have atrained and experienced tuner, not just a mechanic playing with the numbers.
Guy here worked on the LG Motorsports C6R Vette...does that count? We have built a few race cars, rally cars, etc.
The only thing you should be doing on the track is making small adjustments for humidity and temperature. 99.9% of the tune is done on a dyno, both engine and wheel/hub dynos. Then you make SMALL adjustments to get a tad bit more under the current conditions at the track. Most teams also have atrained and experienced tuner, not just a mechanic playing with the numbers.
Sure you have...
![](https://www.miataturbo.net/images/smilies/blah.gif)
![](https://www.miataturbo.net/images/smilies/blah.gif)
#47
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have about 60-hours of track time, this is my 3rd car I've bolted together in the back-yard...but never one like this. I deserve no respect for bolting the car together...I revere the engineers and fabricators who did the work, I just followed directions and advice.
My car is far from raggady. Most people who see it comment on how ******* perfect the car is. I mean ****, I only bought the best of the best, every wire is soldered with loom, every clamp is stainless, every gauge is special-ordered Omori, matching everything, 3 sets of 6ULs in my possession, every bolt is anodized, and it should be considering I now have $20k in a miata. I don't give a **** if your Buick was made this decade, my **** is cleaner, faster, lighter, and did I mention faster?
Your detonation statement is inaccurate. I could hear slight detonation with headphones, that I could not hear in the car...and my ears are really ******* big, like my genitals. Ask your ***** girlfriend who my buddies and I "trained" last weekend. This was after I returned from another classified mission to "neutralize" some issues in the Pacific Rim, so I suggest you NEVER type to me in caps again because its rude and I take respect seriously. Final warning.
p.s. thanks for the advice on my sister's msm. She did the 2.5", gained lots of power, and 1k rpm earlier spool.
My car is far from raggady. Most people who see it comment on how ******* perfect the car is. I mean ****, I only bought the best of the best, every wire is soldered with loom, every clamp is stainless, every gauge is special-ordered Omori, matching everything, 3 sets of 6ULs in my possession, every bolt is anodized, and it should be considering I now have $20k in a miata. I don't give a **** if your Buick was made this decade, my **** is cleaner, faster, lighter, and did I mention faster?
Your detonation statement is inaccurate. I could hear slight detonation with headphones, that I could not hear in the car...and my ears are really ******* big, like my genitals. Ask your ***** girlfriend who my buddies and I "trained" last weekend. This was after I returned from another classified mission to "neutralize" some issues in the Pacific Rim, so I suggest you NEVER type to me in caps again because its rude and I take respect seriously. Final warning.
p.s. thanks for the advice on my sister's msm. She did the 2.5", gained lots of power, and 1k rpm earlier spool.
#48
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
not that I give a **** about internet clout or general public opinion in a shop I have nothing to do with...but Alamo is 100% not ******* around about tuning. They've been building and tuning bad-*** cars, for teams with lots and lots and lots and lots of money for decades.
#49
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![Thefinger](https://www.miataturbo.net/images/smilies/thefinger.gif)
#50
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
After all these pages of insults you ******* idiots still miss the point, close is OK for some people. No one argues that dynos are a great tool. If for no other reasons it give you information to analyze, store and manipulate. But you are so hell bent on arguing and calling an MSM owner a moron, you missed all that.
#51
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
not that I give a **** about internet clout or general public opinion in a shop I have nothing to do with...but Alamo is 100% not ******* around about tuning. They've been building and tuning bad-*** cars, for teams with lots and lots and lots and lots of money for decades.
![Thefinger](https://www.miataturbo.net/images/smilies/thefinger.gif)
Actually I had shoes, but sometimes they had holes in them. I did walk to school, but it was only 4 miles and only from grades 1-3. Pants were hand me down from cousins because I didn't have any brothers...oh, and they closed the schools when it snowed. WTF does that have to do with anything you ******* idiot. ![Thefinger](https://www.miataturbo.net/images/smilies/thefinger.gif)
![Thefinger](https://www.miataturbo.net/images/smilies/thefinger.gif)
#54
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
After all these pages of insults you ******* idiots still miss the point, close is OK for some people. No one argues that dynos are a great tool. If for no other reasons it give you information to analyze, store and manipulate. But you are so hell bent on arguing and calling an MSM owner a moron, you missed all that.
i recall mr four Q's and 3 Atoms said he tunes on the track.
Originally Posted by QQQQ
msydnor... forget it.
Today it is all about the oh-mighty dyno for the uneducated.That machine will get you the most power. This is what you read,this is what you believe. Drop it off and we will find MORE.
Tuning by actually driving your car is something that is just not done anymore,mainly because no one can do it.
We have the dyno. Look at my chart. I made more power than you. My car is faster because the dyno never lies. I will be the bullet that everyone want to beat.
Dynos are for breaking in engines,and giving you a good base tune.
The best final tuning is done track side. Ask any racer. :mrgreen:
Today it is all about the oh-mighty dyno for the uneducated.That machine will get you the most power. This is what you read,this is what you believe. Drop it off and we will find MORE.
Tuning by actually driving your car is something that is just not done anymore,mainly because no one can do it.
We have the dyno. Look at my chart. I made more power than you. My car is faster because the dyno never lies. I will be the bullet that everyone want to beat.
Dynos are for breaking in engines,and giving you a good base tune.
The best final tuning is done track side. Ask any racer. :mrgreen:
#55
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
incidentally, when you come here to argue for your whole forum, it doesn't matter if only you said something. everything in that thread is what "you said" if you're gonna come here and debate them vs. us.
i recall mr four Q's and 3 Atoms said he tunes on the track.
a base tune. I think he's confusing a dyno with the bass mekanik.
i recall mr four Q's and 3 Atoms said he tunes on the track.
a base tune. I think he's confusing a dyno with the bass mekanik.
It's not us vs them, its "why are you calling someone a moron because they don't feel the need for the preciseness of a dyno tune” but idiots want to argue that you cannot tune without one. I agree in whole that a precise tune is best done with a dyno, But everyone does not need that amount of precision. Ans some bullshit mentality of everything they said is what I said is pretty damn ludicrous. I frequent a lot of boards, both domestic and imports. Everyone of the has idiots on them. How the hell am I suppose to be held accountable for the comments made by people who reside somewhere in this country and I never met them? Some of you take this interne community shot way to serious. So what he tunes on the track, I know guys at the drag strip that tune at the track. I don’t know what it’s so hard for you ******* geniuses to understand people tune at the track. I don’t because I suck at tuning, but plenty of people are very proficient at it. I guess because you don’t that means nobody else does.
#58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![Jerkit](https://www.miataturbo.net/images/smilies/jerkit.gif)
#60
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It's not us vs them, its "why are you calling someone a moron because they don't feel the need for the preciseness of a dyno tune” but idiots want to argue that you cannot tune without one. I agree in whole that a precise tune is best done with a dyno, But everyone does not need that amount of precision. Ans some bullshit mentality of everything they said is what I said is pretty damn ludicrous. I frequent a lot of boards, both domestic and imports. Everyone of the has idiots on them. How the hell am I suppose to be held accountable for the comments made by people who reside somewhere in this country and I never met them? Some of you take this interne community shot way to serious. So what he tunes on the track, I know guys at the drag strip that tune at the track. I don’t know what it’s so hard for you ******* geniuses to understand people tune at the track. I don’t because I suck at tuning, but plenty of people are very proficient at it. I guess because you don’t that means nobody else does.
engine management.
let me call *LARGE CAR MANUFACTURER NAME* and see which track they use to fine tune their engines....
the funny part about that thread is that QQQQ got all defensive when I made a jab at newbsauce and the other miataturbo guys for their shitty street tuning skills. I street tune all the time. I took datalogs to and from work tonight and changed my fuel and spark maps at work for the drive home. i'm a ******* miracle worker without a dyno, but I'm still going to use the dyno to verify that my changes had a positive impact.
**** man, you can't rejet a 67 camaro double pumper based on the lope of the god damn idle and expect it to be optimum. no matter what drag strip you are at. even if you manage to optimize your ET, how do you know you dont have a big flat spot somewhere? are you getting a constant stream of ETs for every foot of those 1320? I commend the dude with the datalog system that has that feature. maybe some guy with 3 atoms and a miata has that. he's got everything else (or so we are supposed to envy).
my point in my post was to let you know that you are not the source of our exasperation for that thread. but you come here and defend it. hence you represent that thread and everyone you agree with there.
I have to wonder... when you guys compare dicks, do you just type out how long it looks and corroborate it with "well it sticks out pretty far past my hand and I think I have pretty big hands" instead of putting it on a ruler?