Harness bolting position?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Bethesda, MD
Posts: 430
Total Cats: 9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I got some new Crow Harnesses and I tried to put the mounting brackets through the same bolt as the stock belts but bolt is way too big for the hole. My question is should I drill out the hole or bolt them to a different spot?
#13
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
And no, the stock 1.8 bar behind the seats CANNOT be used as a harness mounting point.
#20
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
watch my track videos....i wasn't wearing my harness cause I only have one (instructor has to have same safety equip.)....at +110mph I'm bouncing all over the ******* seat and in the corners I'm falling out of the damn seat.
and that's with the belt locked tight...I use the "pull fast" trick.
and that's with the belt locked tight...I use the "pull fast" trick.