Godspeed Radiator Install
#43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What do you guys think of the rad setup that is about half way down on this page?http://miataroadster.com/
#44
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
nice writeup op.
Godspeed is literally down the street from where i live as well. compared to paying $300 for a Koyo Alumi radiator (made in Indonesia), i'd rather give the Chinese some $ instead.
not that i need a new radiator right now, but it's good to know where to get a cheap one, assuming godspeed stays in biz long enough.
Godspeed is literally down the street from where i live as well. compared to paying $300 for a Koyo Alumi radiator (made in Indonesia), i'd rather give the Chinese some $ instead.
not that i need a new radiator right now, but it's good to know where to get a cheap one, assuming godspeed stays in biz long enough.
#46
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It'll be awesome if someone made a shroud for those ebay fans. Something like http://fatcatmotorsports.com/igaller..._Photo_004.jpg but probably costing less than $100. I'm sure if you can get a template together you can get Tap Plastic cut it for around $40.
#48
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
just installed one of these today and had to do exactly the same thing to mount it but it was easy enough and total install took 90 mins including the modding.
not sure if he mentioned it but you need to use the brackets from your stock plastic tank radiator to mount this. if you have one of the all metal auto factory rads you're beat.
as far as the drain "plug", it is just a bolt with an o-ring
not sure if he mentioned it but you need to use the brackets from your stock plastic tank radiator to mount this. if you have one of the all metal auto factory rads you're beat.
as far as the drain "plug", it is just a bolt with an o-ring
#58
Elite Member
Thread Starter
iTrader: (30)
Join Date: Aug 2007
Location: Va Beach
Posts: 7,329
Total Cats: 12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Call Planet Miata if Olderguy dosent have any.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#59
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
if Bruce doesn't have a pair I do Tom. I ended up ripping the brackets off my all metal one because it was getting thrown out and i wanted to cut the top halves off anyway so they wouldn't interfere with my intercooler piping.
I installed mine today and the MS logs show a 20-30 degree temp drop after the new radiator and again that is over the larger automatic all metal factory version. My temps were 179-181. i run a 180degree thermostat
I installed mine today and the MS logs show a 20-30 degree temp drop after the new radiator and again that is over the larger automatic all metal factory version. My temps were 179-181. i run a 180degree thermostat
![](http://miatamx5.com/godspeed_radiator_installed_3.jpg)