Hakan,
I sent an email to get a quote with oil pressure sensor and shipping to USA. I am ready to order when you get a quote to me and best way to pay. |
2 Attachment(s)
Originally Posted by Stein
(Post 828605)
Hakan,
I sent an email to get a quote with oil pressure sensor and shipping to USA. I am ready to order when you get a quote to me and best way to pay. Hi Stein Im send an email today. also Im check postoffice for shipping cost its 20$ maxidisplay 260$ oil pressure sensor 65$ shipping 20$ total : 345$ wideband afr oil pressure oil temp water temp battery voltage rpm + TPS + EGT (if you want) edit: oil pressure sensor https://www.miataturbo.net/attachmen...ine=1328015731 free oil and water temp sensor https://www.miataturbo.net/attachmen...ine=1328015731 |
Are you able to send 2 of them in the same box for $20 (i.e. is it a flat rate box)?
|
Originally Posted by paNX2K&SE-R
(Post 828884)
Are you able to send 2 of them in the same box for $20 (i.e. is it a flat rate box)?
<--- Waiting for Paypal address so I can place my order. Can't wait to get this installed. Now, if I misunderstood and you need two in your neck of the woods please disregard the above comment. |
I need 2, one for the Miata, and one for the LS1 S13. :)
|
Originally Posted by panx2k&se-r
(Post 828913)
i need 2, one for the miata, and one for the ls1 s13. :)
|
Originally Posted by paNX2K&SE-R
(Post 828884)
Are you able to send 2 of them in the same box for $20 (i.e. is it a flat rate box)?
He would need your input for configuring the two units, tho. |
Originally Posted by Godless Commie
(Post 828969)
I spoke with Hakan on the phone, apparently two of these units do fit in a flat rate box. So, yes, two can be shipped for 20 bucks.
He would need your input for configuring the two units, tho. In some of the pics of the display it shows one parameter in a larger font than the others, and also some screen shots where only one parameter is being displayed in a very large font. Are these options that one can set/toggle through the menu with the control buttons? |
Originally Posted by paNX2K&SE-R
(Post 829007)
Cool, thanks for asking about that. I sent him an email earlier today.
In some of the pics of the display it shows one parameter in a larger font than the others, and also some screen shots where only one parameter is being displayed in a very large font. Are these options that one can set/toggle through the menu with the control buttons? yes you can select what you want with buttons also you can select startup menu in the setup if you choose peak menu, always peak displayed first when power on menus: Full (all values displaying character base) Main (one large font and others normal) Peak (character base and display peak values) Graph (4 important input displayed and graphic bars) other menu`s single large font and display their peak values Afr Egt Rpm Oil pressure Volt etc.. note: I need yours map sensors details for calculate pressure brand name, part number, picture what you have .. |
If need be can you provide a MAP sensor (at a price of course)? My MAP is inside the hydra and to my knowledge I can't tap off it. Actually kinda thinking this was a nice idea for data logging on the bike, not that I know what I'd need. Just a noob with ambitions.
|
Yes, a MAP sensor can be provided, but he can give you a range of part numbers to choose from, so you can save on shipping, etc..
That's exactly what I did. I used a GM MAP sensor. |
Originally Posted by paNX2K&SE-R
(Post 829007)
Cool, thanks for asking about that. I sent him an email earlier today.
In some of the pics of the display it shows one parameter in a larger font than the others, and also some screen shots where only one parameter is being displayed in a very large font. Are these options that one can set/toggle through the menu with the control buttons? |
Hakan,
I emailed you again to get your Paypal address so that I can send the money. Please let me know what your Paypal address is. |
oh this is good!
I'm currently sourcing my own carnival ride display for my car, but to have one screen display everything? Oh yes tag for further study |
Payment sent. Looking forward to getting this installed. I'm worried about running the car on a new V8 install without good oil and water temp and pressure data.
|
Originally Posted by Stein
(Post 829219)
Payment sent. Looking forward to getting this installed. I'm worried about running the car on a new V8 install without good oil and water temp and pressure data.
|
maybe a stupid question, but this requires adding the sensors? Or does it wire into factory sensors?
|
I'm planning on using GM 3 bar map sensors part #12223861. Hakan, is the oil pressure sender that you use a universal one that I can buy here in the US?
|
Originally Posted by mx-p5
(Post 829239)
maybe a stupid question, but this requires adding the sensors? Or does it wire into factory sensors?
I trying explain we can use some factory sensors TPS sensor and MAP sensor good example but other factory water temp, oil temp, oil pressure we can not use. |
Originally Posted by paNX2K&SE-R
(Post 829247)
I'm planning on using GM 3 bar map sensors part #12223861. Hakan, is the oil pressure sender that you use a universal one that I can buy here in the US?
if you can tell me oil pressure details, I trying use. maybe some info write on sensor pressure and resistance values needed |
All times are GMT -4. The time now is 03:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands