Cut rear bumper
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I like that too. Stripped and extreme mods for aero don't have to be unfinished. In fact unfinished and wide open likely isn't as aerodynamic as something like this one that is finished off and gives the air more smoothing. I'm sure with Savington that the bare *** his car is currently sporting isn't the final answer. I'll bet there is something more like this car in the works now or in the near future.
That's why I also bought the mid section from an Elise. With a front splitter going in and more aluminum tacked underneath mine will not be extreme looking but should be much smoother. I imaging Pass is planning something underneath also.
That's why I also bought the mid section from an Elise. With a front splitter going in and more aluminum tacked underneath mine will not be extreme looking but should be much smoother. I imaging Pass is planning something underneath also.
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ThePass did a whole write up on his Elise diffuser in Sam Amporful's aero thread. Here is a link right to the page his pics are on...
https://www.miataturbo.net/forum/t34522-4/
I have an Elise diffuser mounted up also, just not cut nearly as high as his. Working on the other stuff to go with it currently.
https://www.miataturbo.net/forum/t34522-4/
I have an Elise diffuser mounted up also, just not cut nearly as high as his. Working on the other stuff to go with it currently.
#27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ThePass did a whole write up on his Elise diffuser in Sam Amporful's aero thread. Here is a link right to the page his pics are on...
https://www.miataturbo.net/forum/t34522-4/
I have an Elise diffuser mounted up also, just not cut nearly as high as his. Working on the other stuff to go with it currently.
https://www.miataturbo.net/forum/t34522-4/
I have an Elise diffuser mounted up also, just not cut nearly as high as his. Working on the other stuff to go with it currently.
#28
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I like that too. Stripped and extreme mods for aero don't have to be unfinished. In fact unfinished and wide open likely isn't as aerodynamic as something like this one that is finished off and gives the air more smoothing. I'm sure with Savington that the bare *** his car is currently sporting isn't the final answer. I'll bet there is something more like this car in the works now or in the near future.
That's why I also bought the mid section from an Elise. With a front splitter going in and more aluminum tacked underneath mine will not be extreme looking but should be much smoother. I imaging Pass is planning something underneath also.
That's why I also bought the mid section from an Elise. With a front splitter going in and more aluminum tacked underneath mine will not be extreme looking but should be much smoother. I imaging Pass is planning something underneath also.
Do not ever question me again.
#30
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
+1!
Not that I don't want to but I don't know what I would question you about. Um, the weather maybe?!? I was questioning the unfinished nature of Sav's lack of a bumper. Maybe you missed the part where I said I liked the car you posted up?
Wayne, Still not quite happy with mine. Wanna cut it up slightly higher and also paint it black. Here's a quicky shot of it currently. Only takes a couple minutes to take it on and off, just haven't gotten it done yet. The angle of the center part of diffuser is slightly less than the angle of the lower part of the bumper skin. The outside sections are a slightly greater angle.
![Name: diffusertoday-1.jpg
Views: 2561
Size: 45.4 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/204963d1501250887-cut-rear-bumper-diffusertoday-1.jpg)
Not that I don't want to but I don't know what I would question you about. Um, the weather maybe?!? I was questioning the unfinished nature of Sav's lack of a bumper. Maybe you missed the part where I said I liked the car you posted up?
Wayne, Still not quite happy with mine. Wanna cut it up slightly higher and also paint it black. Here's a quicky shot of it currently. Only takes a couple minutes to take it on and off, just haven't gotten it done yet. The angle of the center part of diffuser is slightly less than the angle of the lower part of the bumper skin. The outside sections are a slightly greater angle.
![Name: diffusertoday-1.jpg
Views: 2561
Size: 45.4 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/204963d1501250887-cut-rear-bumper-diffusertoday-1.jpg)
![Name: diffusertoday3-1.jpg
Views: 3100
Size: 56.2 KB](https://www.miataturbo.net/attachments/general-miata-chat-9/204964d1501250887-cut-rear-bumper-diffusertoday3-1.jpg)
Last edited by cueball1; 06-30-2009 at 08:54 PM.
#40
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I used my HF jigsaw on the bumper skin, and the sawzall on the bumper itself, and on the two tabs that hang down from the frame. For the pattern, I printed out FM's dual-exhaust template and simply cut it out and the portion of the bumper between the two cutouts.
I'll try to get a few more tomorrow, thanks for the compliments!
I'll try to get a few more tomorrow, thanks for the compliments!