Carbon build up, why does it happen?
#1
Elite Member
Thread Starter
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
why does carbon build up on valves/pistons ect?
Google turns up alot of preventative things that suggest ways to avoid major build up but im still stumped as to why it builds up and how it can be so strong.
Discuss
Google turns up alot of preventative things that suggest ways to avoid major build up but im still stumped as to why it builds up and how it can be so strong.
Discuss
#3
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ideally during combustion, the hydrocarbon is recombined with oxygen to form CO2 and H2O. Since a car engine isn't ideal, there are byproducts of combustion. your fuel contains other molecules and the air is not pure oxygen so there are sulfur and nitrogen compounds produced for example.
also, in the non-ideal engine, not all of the carbon is converted into CO2. some of it is converted to CO (carbon monoxide) or left unburnt as raw hydrocarbons, or can't find a dance partner in the combustion chamber and remains pure carbon soot. this happens primarily when there is not enough oxygen for complete combustion. ie running too rich.
so you have raw carbon floating around in your motor as part of (rich) combustion.
now, normally the carbon will remain suspended in the exhaust gas and just get blown out the tailpipe (and onto your white bumper), but some people dont like to open 'er up and drive around slow all the time. the lack of exhaust flow isn't as good at evacuating the carbon in the chamber and it sticks to whatever's in its path out--the piston, chamber, ports, valves, exhaust, whatever.
so there's two primary things you can do to reduce carbon in your motor:
1. tune it properly (not excessively rich) to avoid producing carbon.
2. run that **** hard (high rpm, high load) to blow it out.
#7
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
"so there's two primary things you can do to reduce carbon in your motor:
1. tune it properly (not excessively rich) to avoid producing carbon.
2. run that **** hard (high rpm, high load) to blow it out."
Or- #3. drain the coolant and overheat it like you wanna kill it.
I blew my heater hose on the highway and had to replace a warped head. I was amazed at how clean the piston tops were. Had about 140K on the motor at the time and was expecting a thick carbon coating. Pleasant (as pleasant as can be for the circumstance) surprise...
1. tune it properly (not excessively rich) to avoid producing carbon.
2. run that **** hard (high rpm, high load) to blow it out."
Or- #3. drain the coolant and overheat it like you wanna kill it.
I blew my heater hose on the highway and had to replace a warped head. I was amazed at how clean the piston tops were. Had about 140K on the motor at the time and was expecting a thick carbon coating. Pleasant (as pleasant as can be for the circumstance) surprise...
#8
Moderator
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,885
Total Cats: 3,075
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You can remove the carbon build up with a few different methods, as well. A couple of the more popular used to be dribbling a small quantity of cool water into your running (hot) engine or doing the same with a little automatic transmission fluid.. Both supposedly cause the carbon to dislodge and exit the combustion chamber.
Additives containing oils (Marvel Mystery Oil) will leave some carbon deposits on the stems of your intake valves. So will leaky valve stem seals.
The additive Techron developed by Chevron was created to assist in the removal of carbon deposits and is available in one of their off the shelf bottles. Toyota had a run of engines that had a tendency to develop heavy carbon buildup in the mid '90s and had Techron listed as an approved cure in a TSB. If that didn't work they had to pull the head, and warranty folks don't like to spend money they don't have to (Toyota also had a bad sludge problem in a particular V6 around the same time).
If i ever have the head off of an engine, I will gently remove the heavier carbon before reassembly. It creates nasty hot-spots that will cause detonation. But I prefer to "tune it right" and "run that **** hard."
And the posi-track never did work in a Plymouth...
Additives containing oils (Marvel Mystery Oil) will leave some carbon deposits on the stems of your intake valves. So will leaky valve stem seals.
The additive Techron developed by Chevron was created to assist in the removal of carbon deposits and is available in one of their off the shelf bottles. Toyota had a run of engines that had a tendency to develop heavy carbon buildup in the mid '90s and had Techron listed as an approved cure in a TSB. If that didn't work they had to pull the head, and warranty folks don't like to spend money they don't have to (Toyota also had a bad sludge problem in a particular V6 around the same time).
If i ever have the head off of an engine, I will gently remove the heavier carbon before reassembly. It creates nasty hot-spots that will cause detonation. But I prefer to "tune it right" and "run that **** hard."
And the posi-track never did work in a Plymouth...
#10
Elite Member
Thread Starter
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Here is a nice writeup someone linked a thread on a local board for me:
Carbon Build-Up
Im not concerned about buildup since my car sees 7k just about ever on ramp its driven on. Im trying to understand why it happens. Thanks for the input guys. Keep the info comin!
Carbon Build-Up
Im not concerned about buildup since my car sees 7k just about ever on ramp its driven on. Im trying to understand why it happens. Thanks for the input guys. Keep the info comin!
#11
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Its crazy how many people never put the needle in the red. Whenever I drive or ride with people from work, they all like to tell me that I'm going to blow up the motor. It revs that far over for a reason, lol. Another guy I work with told me "there is no reason to rev a car past 4k rpm." I can't fathom a car that doesn't see the full rpm range daily...it revs that high for a reason.
#12
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I feel the need to contribute two fun facts to this thread.
My 153k mile 1.6 motor revved much faster on heel-toe shifting after I ran water through a vacuum tube into the intake.
A bunch of my friends fouled plugs when they ran "purple" at Hallett last year, even the FI cars. They fouled them on the way home, when they were cruising with race-fuel. I believe two cars fouled plugs so bad that they wouldn't even run.
My 153k mile 1.6 motor revved much faster on heel-toe shifting after I ran water through a vacuum tube into the intake.
A bunch of my friends fouled plugs when they ran "purple" at Hallett last year, even the FI cars. They fouled them on the way home, when they were cruising with race-fuel. I believe two cars fouled plugs so bad that they wouldn't even run.
#13
Elite Member
Thread Starter
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hustler, may i ask how much water you sucked through the vac line? I recently picked up an 88 audi 90 quattro that i'm suspecting heavy buildup and am considering the water trick to see if it helps at all.
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I feel the need to contribute two fun facts to this thread.
My 153k mile 1.6 motor revved much faster on heel-toe shifting after I ran water through a vacuum tube into the intake.
A bunch of my friends fouled plugs when they ran "purple" at Hallett last year, even the FI cars. They fouled them on the way home, when they were cruising with race-fuel. I believe two cars fouled plugs so bad that they wouldn't even run.
My 153k mile 1.6 motor revved much faster on heel-toe shifting after I ran water through a vacuum tube into the intake.
A bunch of my friends fouled plugs when they ran "purple" at Hallett last year, even the FI cars. They fouled them on the way home, when they were cruising with race-fuel. I believe two cars fouled plugs so bad that they wouldn't even run.
#16
Moderator
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,885
Total Cats: 3,075
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've done it with a quart jar of water on a v8 a few times. Be careful not to give it too much too fast or it will screw up you engine (hydro-lock, bad news). You also want to pick a line that will give you good distribution to all cylinders. Think where the water injection guys put their nozzles.
I revved the engine up by hand (engine needs to be good and hot to work) and poured as much in as it could stand without it dropping below 2500 rpm.
Not very technical...
I revved the engine up by hand (engine needs to be good and hot to work) and poured as much in as it could stand without it dropping below 2500 rpm.
Not very technical...
#18
Moderator
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,885
Total Cats: 3,075
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Oh, yeah, and if you still have a cat on your car, that's where the carbon will end up when you are finished.![](https://www.miataturbo.net/images/smilies/smile.gif)
You might check that out when you are done. Good time to gut the cat and add a simulator for better breathing.
![](https://www.miataturbo.net/images/smilies/smile.gif)
You might check that out when you are done. Good time to gut the cat and add a simulator for better breathing.