Bought a Miata that won't start - Help Troubleshoot
#121
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: San Jose, CA
Posts: 144
Total Cats: -3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm at a standstill right now on what to do. Haven't had too much time to work on it, but I'm still working on trying to figure out how to confirm that it is the lack of spark and nothing else.
#122
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
First, I would probably take it apart (Megasquirt), and look for any sort of obvious issues or damage. Then from there, try to connect to it with a computer and make sure everything appears to be in order, functioning properly, etc. IIRC you were able to connect to it once, but have not been able to since? Perhaps that's a sign it's not working right anymore?
if it cant run on the stock ECU, then the MS is NOT the ******* ISSUE.
#123
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Location: San Jose, CA
Posts: 144
Total Cats: -3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Haha just so everyone is clear, I am currently working on trying to get the car running/started on the stock ECU and not the MS. Once I get things working on the stock ECU, then we can work on the MS from there. But right now, the stock ECU is in, the MAF is in and stock injectors are in. When I crank the car, I've noticed no spark and believe that is my issue, or at least the first one I'm trying to address.
#129
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Having looked at the car in person, most of the hacked up wiring isn't in anything related to the CAS/ECU/igniter/coil circuits. It's stupid stuff like power wires for stereo, fog lights, extra cigarette lighter adapter, etc. The exception is the mess that is the ignition switch & start button -- that one really should be cleaned up.
HH: If you've checked for power/ground & continuity in the four components mentioned above, then the next step is to put an oscilloscope on those wires and look to see if you're actually getting CAS signals, if the ECU is actually generating igniter pulses, etc. That will let you narrow it down to a single component that isn't doing what it's supposed to, either because it's broken or because some other input that it's expecting is not coming through.
--Ian
HH: If you've checked for power/ground & continuity in the four components mentioned above, then the next step is to put an oscilloscope on those wires and look to see if you're actually getting CAS signals, if the ECU is actually generating igniter pulses, etc. That will let you narrow it down to a single component that isn't doing what it's supposed to, either because it's broken or because some other input that it's expecting is not coming through.
--Ian
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
7
11-03-2015 01:51 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM