Anyone Tried this Short Shifter?
#1
Anyone Tried this Short Shifter?
There's a man named Keith who has been selling this shifter for the past year or so. He recently came out with his second revised version. I'm wondering if anyone has tried this and has anything to say about it. I attached a picture and here is his website: https://www.gracingshifters.com/. I'm not looking for a comparison between this and any other shifter, just for any experience you might want to share about it. Thanks
#2
I haven't used this shifter personally, but I've seen a few people post about it on Facebook. People seem to like it. Seems to rattle for everyone at higher rpm, similar to how the IRP shifter does. They say wrapping the ball with teflon tape seems to fix that for the most part. I don't believe it used a plastic bushing like the oem one does, so that may be the source of the issue. Also, apparently it has "worn out" for a couple people? saying that after a few months, it felt loose.
#3
Thanks so much for that info. I was concerned about the lack of the bushing too. I actually just ordered one a few minutes ago and asked him to turn the ball down to the stock shift ball size so I could put the bushing on it. I'll update this thread or make another one as a review once I get it it and what not. Seems really nice though, and it was $280 for everything (he charged me $20 extra to turn the ball down). Great communication so far so good
#5
Are there any aftermarket shifters that still have an isolated shifter like stock? I think almost all of the loud/rattly/buzzing noises that people report after installing a short shifter are from the fact the OEM isolation is no longer present, so you have a direct transfer path to all of that 2EO shaking force (from the rod ratio).
#7
Are there any aftermarket shifters that still have an isolated shifter like stock? I think almost all of the loud/rattly/buzzing noises that people report after installing a short shifter are from the fact the OEM isolation is no longer present, so you have a direct transfer path to all of that 2EO shaking force (from the rod ratio).
#10
Got my shifter in the mail today. The part he spun down fit the OEM nylon bushing pretty well, but I sanded it a bit to allow a little easier movement. The shifter is already put together as pictured, and there is some grease already in there, but I did put some more all purpose Mobil grease at both sides of the ball. He also did happen to forget sending the bolts which was a bummer, but a quick trip to Ace and $5 solved the issue. Put the shifter in, bolted it up, and put the large boot and sound deadening over along with the console. After that installation was complete.
First impressions of the shifter was that it definitely felt more sturdy and short, but I didn't know how much compared to my old run of the mill eBay short shifter. I love the look too.
On the first drive I definitely noticed how short and nice it was. I opted for the longer 3" throw version because I had heard it was better for the 6 speeds but he does sell a 1.6" variant primarily for 5 speeds (it will work on 6s tho). I'm quite happy with even the longer throw version. I will say there is a slight vibration above 4k or so kind of like Wrilee said, but it's manageable when the car screams up there. The one other thing that is noticeable is hearing the gears whir more in the trans, but again that is only at elevated revs off throttle kinda thing. Most importanly, no clanking, stiffer feel, shorter throw, and a good shifter worth the money. It's quite a nice package and at only $280 I'd say it's well worth it. Obviously not sure how it'll be a year from now, but time will tell.
First impressions of the shifter was that it definitely felt more sturdy and short, but I didn't know how much compared to my old run of the mill eBay short shifter. I love the look too.
On the first drive I definitely noticed how short and nice it was. I opted for the longer 3" throw version because I had heard it was better for the 6 speeds but he does sell a 1.6" variant primarily for 5 speeds (it will work on 6s tho). I'm quite happy with even the longer throw version. I will say there is a slight vibration above 4k or so kind of like Wrilee said, but it's manageable when the car screams up there. The one other thing that is noticeable is hearing the gears whir more in the trans, but again that is only at elevated revs off throttle kinda thing. Most importanly, no clanking, stiffer feel, shorter throw, and a good shifter worth the money. It's quite a nice package and at only $280 I'd say it's well worth it. Obviously not sure how it'll be a year from now, but time will tell.
#11
I just received the adapter and here are some pictures if anyone may need to do this later on in some sort of modified Miata etc.
It relocates the shifter rearward 7" from the original location. It reuses all the same bolts as the Miata was equipped with. Just the adapter is needed. Don't know who makes it, but there are numbers if that helps.
Thanks again for all the help.
Dan
It relocates the shifter rearward 7" from the original location. It reuses all the same bolts as the Miata was equipped with. Just the adapter is needed. Don't know who makes it, but there are numbers if that helps.
Thanks again for all the help.
Dan
#12
Wrong thread Dan. I think this is the one. https://www.miataturbo.net/suspensio...cation-103164/
I don't blame you Dan. I blame our Internet Bulletin overlords.
That looks like a very nice adapter. $50 is a steal compared to the work it would have taken to replicate that. I hope you share more of your Morgan build.
I don't blame you Dan. I blame our Internet Bulletin overlords.
That looks like a very nice adapter. $50 is a steal compared to the work it would have taken to replicate that. I hope you share more of your Morgan build.
#14
Got my shifter in the mail today. The part he spun down fit the OEM nylon bushing pretty well, but I sanded it a bit to allow a little easier movement. The shifter is already put together as pictured, and there is some grease already in there, but I did put some more all purpose Mobil grease at both sides of the ball. He also did happen to forget sending the bolts which was a bummer, but a quick trip to Ace and $5 solved the issue. Put the shifter in, bolted it up, and put the large boot and sound deadening over along with the console. After that installation was complete.
First impressions of the shifter was that it definitely felt more sturdy and short, but I didn't know how much compared to my old run of the mill eBay short shifter. I love the look too.
On the first drive I definitely noticed how short and nice it was. I opted for the longer 3" throw version because I had heard it was better for the 6 speeds but he does sell a 1.6" variant primarily for 5 speeds (it will work on 6s tho). I'm quite happy with even the longer throw version. I will say there is a slight vibration above 4k or so kind of like Wrilee said, but it's manageable when the car screams up there. The one other thing that is noticeable is hearing the gears whir more in the trans, but again that is only at elevated revs off throttle kinda thing. Most importanly, no clanking, stiffer feel, shorter throw, and a good shifter worth the money. It's quite a nice package and at only $280 I'd say it's well worth it. Obviously not sure how it'll be a year from now, but time will tell.
First impressions of the shifter was that it definitely felt more sturdy and short, but I didn't know how much compared to my old run of the mill eBay short shifter. I love the look too.
On the first drive I definitely noticed how short and nice it was. I opted for the longer 3" throw version because I had heard it was better for the 6 speeds but he does sell a 1.6" variant primarily for 5 speeds (it will work on 6s tho). I'm quite happy with even the longer throw version. I will say there is a slight vibration above 4k or so kind of like Wrilee said, but it's manageable when the car screams up there. The one other thing that is noticeable is hearing the gears whir more in the trans, but again that is only at elevated revs off throttle kinda thing. Most importanly, no clanking, stiffer feel, shorter throw, and a good shifter worth the money. It's quite a nice package and at only $280 I'd say it's well worth it. Obviously not sure how it'll be a year from now, but time will tell.
#18
Junior Member
iTrader: (1)
Join Date: Dec 2018
Location: Dallas/Fort Worth
Posts: 311
Total Cats: 100
Also posted on chr's thread, but have you run into synchro issues when trying to shift quickly/bang gears? That was my only gripe with this one in my 5spd a year ago and I'm debating what shifter to put on my new 6spd.
#20
I have gotten the occasional slight grind when crossing gates to the next gear, but that was on super aggressive shifts. With the stock shifter I was still able to grind if I went fast enough. It was just harder with the stock one because of the increased throw you had to go through