AC woes
#1
Senior Member
Thread Starter
iTrader: (14)
Join Date: Oct 2006
Location: South East Florida
Posts: 677
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Got the 99 back on the road after sitting several months and the air conditioning took a ----.
Compressor kicks on in short bursts of a few seconds and it will blow cold air during that time.
Went to the same shop that recharged the system on my 94, and was told this:
I need to fix this on the lowest possible budget and need suggestions?
Is it feasible to have them evacuate and re-charge with me replacing all of the parts with used parts? Do I need to use new parts?
AC is magic to me, well above my head.
Compressor kicks on in short bursts of a few seconds and it will blow cold air during that time.
Went to the same shop that recharged the system on my 94, and was told this:
System low; has a leak at the compressor; evac and re-charge with correct amount of R134AL
Re-test: system has a blockage - suspect expansion valve - possibly need an expansion valve, a drier, and a compressor; also needs a condenser flush
Re-test: system has a blockage - suspect expansion valve - possibly need an expansion valve, a drier, and a compressor; also needs a condenser flush
Is it feasible to have them evacuate and re-charge with me replacing all of the parts with used parts? Do I need to use new parts?
AC is magic to me, well above my head.
#2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
new drier. i bought a 99-00 drier and expansion valve for like 50 iirc with shipping from rock auto.
good used compressor, blow all of the lines out with sc solvent then blast with nitrogen. replace all the o-rings you take off and lube them with compressor oil.
you are lucky, the 01-05 has the drier built into the condensor.... so my drier is sitting here while i debate whether i want to use it or not...
compressor, look around to see if anyone rebuilds them in your area, or try a used one, im a bit warey because all of the compressor failing threads on m.net...
in reality, the nb's ate expansion valves under warranty.
im in the process of probably doing the same thing to mine, ac is definatly wizardtry to me...
good used compressor, blow all of the lines out with sc solvent then blast with nitrogen. replace all the o-rings you take off and lube them with compressor oil.
you are lucky, the 01-05 has the drier built into the condensor.... so my drier is sitting here while i debate whether i want to use it or not...
compressor, look around to see if anyone rebuilds them in your area, or try a used one, im a bit warey because all of the compressor failing threads on m.net...
in reality, the nb's ate expansion valves under warranty.
im in the process of probably doing the same thing to mine, ac is definatly wizardtry to me...
#4
Senior Member
Thread Starter
iTrader: (14)
Join Date: Oct 2006
Location: South East Florida
Posts: 677
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
http://blog.choppedoctopus.com/2011/...ing-my-ac.html
Looking promising.
Thinking about picking up a used compressor and sealed evaporator unit that hopefully has a good expansion valve, and a new drier.
Also considering cleaning my existing evaporator and putting a new expansion valve on it.
Anyone with a evaporator unit pulled they want to sell cheap?
Looking promising.
Thinking about picking up a used compressor and sealed evaporator unit that hopefully has a good expansion valve, and a new drier.
Also considering cleaning my existing evaporator and putting a new expansion valve on it.
Anyone with a evaporator unit pulled they want to sell cheap?
#5
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wouldn't follow that shop's "work flow" given they returned a repaired car that isn't work. The compressor cycling on/off with a recent recharge, sounds like an overcharge and excessive pressure causing the high pressure switch to cut the compressor off. Compressors on - pressure rises - switch trips - compressor off - pressure drops - compressor on...
The proper thing to do is put a gauge on the system and verify a excessive high pressure. If you are a total hack and don't mind risking your **** (you and the AC) - you could verify the switch is indeed cutting off the compressor by wiring in a switch to jump those leads (keeping the switch in the circuit). As soon as the compressor cuts off, flip the switch and see if comes on and immediately turn it back off. At that point you would know that you either have high pressure or an erratic/bad switch (or even wiring).
fwiw - I picked up the HF AC gauges for something like $45 after coupon. No regrets there.
The proper thing to do is put a gauge on the system and verify a excessive high pressure. If you are a total hack and don't mind risking your **** (you and the AC) - you could verify the switch is indeed cutting off the compressor by wiring in a switch to jump those leads (keeping the switch in the circuit). As soon as the compressor cuts off, flip the switch and see if comes on and immediately turn it back off. At that point you would know that you either have high pressure or an erratic/bad switch (or even wiring).
fwiw - I picked up the HF AC gauges for something like $45 after coupon. No regrets there.
#6
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
For now, pick up a can of R134 with dye, charge to 40psi, drive it, then look for the dye. If you have to work on it and air gets into the system, you'll need to vacuum and refil.
#9
Senior Member
Thread Starter
iTrader: (14)
Join Date: Oct 2006
Location: South East Florida
Posts: 677
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wouldn't follow that shop's "work flow" given they returned a repaired car that isn't work. The compressor cycling on/off with a recent recharge, sounds like an overcharge and excessive pressure causing the high pressure switch to cut the compressor off. Compressors on - pressure rises - switch trips - compressor off - pressure drops - compressor on...
The proper thing to do is put a gauge on the system and verify a excessive high pressure.
The proper thing to do is put a gauge on the system and verify a excessive high pressure.
Will call around and see if anyone rents out equipment, so I can give you better facts.
#16
Senior Member
Thread Starter
iTrader: (14)
Join Date: Oct 2006
Location: South East Florida
Posts: 677
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Here is static pressure with AC off:
![](https://www.miataturbo.net/attachments/general-miata-chat-9/47305-ac-woes-1c0ad56c.jpg?dateline=1340488993)
Tough to see it in the picture, but the sludge has a greenish hue. Mechanic said that is a leaking spot. The refrigerant is a neon green- accidentily discharged a little on the valve cover when figuring out how to disconnect everything.
![](https://www.miataturbo.net/attachments/general-miata-chat-9/47305-ac-woes-1c0ad56c.jpg?dateline=1340488993)
Tough to see it in the picture, but the sludge has a greenish hue. Mechanic said that is a leaking spot. The refrigerant is a neon green- accidentily discharged a little on the valve cover when figuring out how to disconnect everything.
![](https://www.miataturbo.net/attachments/general-miata-chat-9/47306-ac-woes-81d68d85.jpg?dateline=1340488993)
#18
Senior Member
Thread Starter
iTrader: (14)
Join Date: Oct 2006
Location: South East Florida
Posts: 677
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I think the low side is supposed to hold low rather than rising. Mechanic said the low side rises and the compressor shuts down. Probably a sensor tells it to.
I have to read through everything I already forgot from my research this week. At a minimum, I know I am low on freon.
I have to read through everything I already forgot from my research this week. At a minimum, I know I am low on freon.
#19
Senior Member
Thread Starter
iTrader: (14)
Join Date: Oct 2006
Location: South East Florida
Posts: 677
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Going to have to pick up a new low side feed tube too. Walked past the car a while after finishing, and I heard it leaking from the port. It's similar to a tire valve. Messed around with the little thing in the hole and stopped the leak.