DNMakinson
January 17, 2017
Idle occurs somewhere around 30 to 45 kPa, typically. When you go into idle advance, you are set to run somewhere around 17 BTDC, and the curve is not precise in the operating area. Personally, I make mine flat to 10* and use an idle RPM Timing Correction Curve similar to your curve on that.
Original Thread
Another MS3 Basic Firmware Update ThreadMore About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!