Welding stainless???with mild steel wire
#21
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Atlanta ga
Posts: 191
Total Cats: -11
Tig with trimix?
It's clear you really don't know what you're doing and neither does your friend if he is using trimix for tig.
If you're having a problem with wire feed stainless and 75/25, you need to set the machine up properly, and prep you work properly.
We build tanks out of stainless that are filled with extremely corrosive liquids and hold a tremendous amount of weight(pressure) with this process and have great success.
It's clear you really don't know what you're doing and neither does your friend if he is using trimix for tig.
If you're having a problem with wire feed stainless and 75/25, you need to set the machine up properly, and prep you work properly.
We build tanks out of stainless that are filled with extremely corrosive liquids and hold a tremendous amount of weight(pressure) with this process and have great success.
#22
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,684
Total Cats: 806
I won't stand here and say that one way is better than the other. Because I know welding stainless without trimix isn't. But I do know it's possible.
Honestly, you're best bet is to just find someone with a tig and let them do it.
#23
In order to prove the length of my *****, I found this on the Lincoln Welding website. .
In addition, you do not want to use the same type of shielding gas that you use with carbon steel wire, such as 75%Ar/25%CO2 or 100%CO2. Both carbon and oxygen from the shielding gas react with the stainless steel in the heat of the arc, resulting in some oxidization and reduction in corrosion resistance. - See more at: http://m.lincolnelectric.com/en-us/s....GGdEiois.dpuf
In addition, you do not want to use the same type of shielding gas that you use with carbon steel wire, such as 75%Ar/25%CO2 or 100%CO2. Both carbon and oxygen from the shielding gas react with the stainless steel in the heat of the arc, resulting in some oxidization and reduction in corrosion resistance. - See more at: http://m.lincolnelectric.com/en-us/s....GGdEiois.dpuf
#30
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,193
Total Cats: 1,685
By header flange you mean the one at the head, or the one to go from manifold to turbo. Either way PRL Motorsports is where you need to go. They have both and are extremely fast with shipping them out.
Thread
Thread Starter
Forum
Replies
Last Post
swankyjosh
Miata parts for sale/trade
1
11-14-2015 01:49 PM
cyotani
Miata parts for sale/trade
9
10-26-2015 10:18 AM
Hot_Wheels
Miata parts for sale/trade
2
10-23-2015 08:56 PM