DIY manifold
#366
Retired Mech Design Engr
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,010
Total Cats: 857
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just like mine, but yours won't have the cracks for that "Old Truck" sound, cause you are going to weld it correctly. Turbo location same as well. Works great to fit everything.
For some reason, I thought you were buildiing a tubular, rather than a log?
Are you planning to cut the flange between ports?
For some reason, I thought you were buildiing a tubular, rather than a log?
Are you planning to cut the flange between ports?
#368
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,188
Total Cats: 1,684
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
First manifold is done, downpipe is tacked together and fits a NA. 2.5" V-Band downpipe inlet to a 3" V-band outlet.
![](http://mkturbo.com/manifoldpictures/mkturbo/NAmdp01.jpg)
![](http://mkturbo.com/manifoldpictures/mkturbo/NAmdp02.jpg)
Last edited by shuiend; 10-03-2014 at 09:22 PM.
#370
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Can you post a picture of the block side of the flange with the pipe welded? Is your thru hole ID same as the pipe ID? I probably would have overbored the thru hole to match the pipe OD and threw a fillet weld on the insid to prevent moisture from penetrating the inside flange/pipe seam. You wouldn't need the expensive counterbore or weld prep other than cleaning then either.
#376
Retired Mech Design Engr
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,010
Total Cats: 857
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Can you post a picture of the block side of the flange with the pipe welded? Is your thru hole ID same as the pipe ID? I probably would have overbored the thru hole to match the pipe OD and threw a fillet weld on the insid to prevent moisture from penetrating the inside flange/pipe seam. You wouldn't need the expensive counterbore or weld prep other than cleaning then either.
#378
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,188
Total Cats: 1,684
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
First MKTurbo.com setup is complete. Basic log manifold with a T3 Chinacharger made to clear AC/PS. 2.5" v-band outlet at the turbo which expands 3" v-band out at the midpipe. 3" all the way back with a huge magnaflow muffler to keep noise down.
![](http://mkturbo.com/manifoldpictures/mkturbo/nafullsetup01.jpg)
Last edited by shuiend; 10-03-2014 at 09:23 PM.
#380
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,188
Total Cats: 1,684
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Below is how I have the bends going into the muffler.
![](http://mkturbo.com/manifoldpictures/mkturbo/nafullsetup07.jpg)
Last edited by shuiend; 10-03-2014 at 09:24 PM.