The custom fabrication thread! (Post pics of stuff you have made)
#841
PCV oil vapor catch can
Here's my simple PCV oil vapor catch can that goes in place of the stock airbox. It's for naturally aspirated cars running individual throttle bodies. One hose comes off the stock PCV valve, the other goes to vent on the valve cover. No internal baffling or pot scrubbers or anything because it's not really needed on a N/A car. Very similar to the ones made by Ocean @ Chikara Motorsports except my dimensions are a little bit different (4" square tube overhangs the shelf a little bit) and I have threaded bungs which allow for replaceable fittings to permit 90° elbows to be used if so desired. I designed it and cut all the pieces. A friend welded it up for me because I suck at TIG welding aluminum.
#843
Here's my simple PCV oil vapor catch can that goes in place of the stock airbox. It's for naturally aspirated cars running individual throttle bodies. One hose comes off the stock PCV valve, the other goes to vent on the valve cover. No internal baffling or pot scrubbers or anything because it's not really needed on a N/A car. Very similar to the ones made by Ocean @ Chikara Motorsports except my dimensions are a little bit different (4" square tube overhangs the shelf a little bit) and I have threaded bungs which allow for replaceable fittings to permit 90° elbows to be used if so desired. I designed it and cut all the pieces. A friend welded it up for me because I suck at TIG welding aluminum.
Mine is going on a turbo setup so Im going to do some baffling
#849
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,922
Total Cats: 402
Nice! There's plenty of what you have in your pictures here at work (after the Segway's died they switched to razor type scooters) so let us know how you do it.
Here's something my dad and I built circa early 90's. The horizontal shaft engine was a display piece at the local VoTech that was missing basically everything, built it using vertical shaft pieces I pirated off a dumpster lawn mower, intake manifold is a BBC oil pump pickup tube. I built a few silly things like this when I was a kid but this is the only one that I still have, stored in my parent's basement.
I don't think it's safe enough to give to my kids though.
Here's something my dad and I built circa early 90's. The horizontal shaft engine was a display piece at the local VoTech that was missing basically everything, built it using vertical shaft pieces I pirated off a dumpster lawn mower, intake manifold is a BBC oil pump pickup tube. I built a few silly things like this when I was a kid but this is the only one that I still have, stored in my parent's basement.
I don't think it's safe enough to give to my kids though.
#850
I've got some rod that should direct fit into the hollow end of the gear of the starter. And another tube to sip over that to make it the right diameter for a sprocket. Attaching to the wheel is going to be much harder I'm going to weld 2 shaft collars together to clamp onto the wheel and clamp onto 1.5" od tube. I didnt just weld to the wheel because I wouldnt be able to get the bearing out if it needed to be serviced, which it probably will since these wheels were designed to top out at 5mph, not 20mph. Probably not going to be perfectly concentric, but at this power and weight level with #40 gokart chain I'm not terribly concerned. I'm thinking of mounting the motor behind the wheel and putting a rear fender on like the stock one to use as a brake.
#853
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
This trick has been going on for a while.
The M/C is anchored only to the relatively thin and slightly flexible sheet metal of the firewall, and thus it can move slightly in normal operation. You can actually see it if you have someone else sit in the car and apply the pedal hard while you observe under the hood.
With an otherwise healthy brake system, this doesn't actually limit available braking power, but people with extreme MOCD fixate over the fact that it means that some part of their car is slightly less than optimal, and obsess over how it contributes to a slight softness in the pedal.
The M/C is anchored only to the relatively thin and slightly flexible sheet metal of the firewall, and thus it can move slightly in normal operation. You can actually see it if you have someone else sit in the car and apply the pedal hard while you observe under the hood.
With an otherwise healthy brake system, this doesn't actually limit available braking power, but people with extreme MOCD fixate over the fact that it means that some part of their car is slightly less than optimal, and obsess over how it contributes to a slight softness in the pedal.
#854
The master is mounted to a largely unsupported span of sheet metal. When pressure is applied to the pedal, the sheet metal deflects. The result is additional travel and an altered feel. That strain can largely be eliminated with a master cylinder brace. It's something that won't make the car faster by an appreciable amount but they do improve the feal.
#855
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
what they said.
and these guys
https://www.miataturbo.net/suspensio...%3D-win-36044/
to be honest ive never really had any complaints, it was just so easy to make one and highly regarded, so why not.
and these guys
https://www.miataturbo.net/suspensio...%3D-win-36044/
to be honest ive never really had any complaints, it was just so easy to make one and highly regarded, so why not.
#856
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
I built an ebike in highschool for a project that used a GM v8 starter motor....
it worked great, but it died a horrible death because it wasn't meant for long use life (think of the last time you cranked your car for 30+ seconds). The bike was wicked fast though.
#857
Yeah I mean its going to be able to hit terrifying speeds in under 10 seconds of on time. And the battery only has 5 minutes of full power time for the motor. Probably just going to pulse and coast. If I decide that it needs more cooling then I can drill the back cap and duct a 120mm computer fan into the back cap to blow on the commutator.
#858
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
is it direct drive with a flywheel, or chain driven?
maybe add some kind of freewheel if your chain driving so that you can coast longer...there is a lot of force making you slow down with one of these if chain driven without the freewheel.... so much so that it will reallllly slow you down...
maybe add some kind of freewheel if your chain driving so that you can coast longer...there is a lot of force making you slow down with one of these if chain driven without the freewheel.... so much so that it will reallllly slow you down...