What you think??
#5
Type "DIY, head work, headwork, port and polish" and terms like that into the advanced search engine. You could read for days. Unfortunately most here are dumb asses and don't know anything about headwork and simply regurgitate what other highly unknowledgeable people said. So getting the facts straight is tough. Best bet is to buy a few books on cylinder head modifications and read up. Basically do your own research and come to your own conclusions. That's the first half; learning what works. There are also book that teach you HOW to do the work. That's the other half. Just because a bigger intake valve on a 2 valve SUHC big block helps the motor breathe to 5500 RPMs doesn't mean a 4 valve pent roof under square engine needs them too. But try to tell that to some of the members of this forum and they'll say "well FM does it and so does blah blah blah, and he did too, therfore it works!"
#9
I'll throw you a bone. I've got this one, and it's pretty good all things considered. I don't agree with the author on all accounts, but overall, a very informative, to the point read.
How to Build, Modify and Power Tune Cylinder Heads (Speedpro): Peter Burgess, David Gollan: Amazon.co.uk: Books
#10
What are Orbs?
What are orbs?
EMBRACE DA TROOF!
They are life forms that travel in groups and are believed to be the human soul or life force of those that once inhabited a physical body here on earth.
Believe, My brother!!!
Salvation is coming, the orbs are there to help you!!!
#11
Ah, if English isn't your first language then my apologies. Your English reads well. You just don't capitalize the first letter of every sentence like we do. That was what I was complaining about.
I'll throw you a bone. I've got this one, and it's pretty good all things considered. I don't agree with the author on all accounts, but overall, a very informative, to the point read.
How to Build, Modify and Power Tune Cylinder Heads (Speedpro): Peter Burgess, David Gollan: Amazon.co.uk: Books
I'll throw you a bone. I've got this one, and it's pretty good all things considered. I don't agree with the author on all accounts, but overall, a very informative, to the point read.
How to Build, Modify and Power Tune Cylinder Heads (Speedpro): Peter Burgess, David Gollan: Amazon.co.uk: Books
#16
the block have been rebuilt last year so the base should be okay i dont understand what you are saying sorry. But the pistons are b6t turbo stock pistons and the base of the engine stay in the car and car is outside for her first winter :(
My question is should i clean the top of the pistons if yes what sould i use are they of a normal color?
My question is should i clean the top of the pistons if yes what sould i use are they of a normal color?
#17
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,557
Total Cats: 5
the pistons look fine to me, i guess if you want to clean them get some mineral spirits and a soft cloth and wipe them down. At least you cant hurt anything doing that. Also, cover those ports up with some tape or something man ... you dont want dirt to get in that oil port because even a little tiny bit would have to go through the entire head before it made its way through the filter.