Turbo Miata Racing series wants your input..
#47
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Newbsauce has a set of the aerocatch flush mounts that look pretty good installed. Just don't buy the sparco flush mounts...he did and bought a new windshield along with his aerocatches.
#54
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
#58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Reroute is actually a free mod. It requires only the cheapest of supplies and some super common tools:
-a smallish wrench
-pliers/screwdrivers for hose clamps
-some of that super gray gasket sealant stuff
-a big length of radiator hose
-some wire to run the temp sensor to the front of the engine
-some hose for the heater core
-a barb fitting and some caps for the little thermostat stalk hoses
That's it.
A) remove thermostat and heater core/temp sensor housings
B) peel back sheathing on wire and clip the temperature sensor wire. Splice in some wire to make it long enough to reach the front of the engine bay
C) Put thermostat and thermostat housing on back of engine, seal with gasket sealant. When it is firmly attached, route radiator hose from there to radiator. The fit under the throttle body is tight but don't be a ***** about it. It's definitely doable.
D) Put temp sensor housing at front of engine, sealing the surface with gasket sealant. That gray stuff is awesome. Attach your super-long wire that you extended from teh back of the engine bay to the sensor. Zip tie the wire off to the side so it doesn't snag on anything.
E) attach heater core hose to temp sensor housing.
F) detach both of the little hoses on the "thermostat stalk" that no longer houses the thermostat. Use the little hose barb to connect them to each other. This will cause the pump to draw water directly through the intake manifold from teh back of the engine, right next to the new thermostat location. Seal off both of the stalk hose barbs.
G) You are done, have a beer.
This is my setup and it seems to work just fine so far. Engine heats up promptly and doesn't overheat even with both fans disabled.
-a smallish wrench
-pliers/screwdrivers for hose clamps
-some of that super gray gasket sealant stuff
-a big length of radiator hose
-some wire to run the temp sensor to the front of the engine
-some hose for the heater core
-a barb fitting and some caps for the little thermostat stalk hoses
That's it.
A) remove thermostat and heater core/temp sensor housings
B) peel back sheathing on wire and clip the temperature sensor wire. Splice in some wire to make it long enough to reach the front of the engine bay
C) Put thermostat and thermostat housing on back of engine, seal with gasket sealant. When it is firmly attached, route radiator hose from there to radiator. The fit under the throttle body is tight but don't be a ***** about it. It's definitely doable.
D) Put temp sensor housing at front of engine, sealing the surface with gasket sealant. That gray stuff is awesome. Attach your super-long wire that you extended from teh back of the engine bay to the sensor. Zip tie the wire off to the side so it doesn't snag on anything.
E) attach heater core hose to temp sensor housing.
F) detach both of the little hoses on the "thermostat stalk" that no longer houses the thermostat. Use the little hose barb to connect them to each other. This will cause the pump to draw water directly through the intake manifold from teh back of the engine, right next to the new thermostat location. Seal off both of the stalk hose barbs.
G) You are done, have a beer.
This is my setup and it seems to work just fine so far. Engine heats up promptly and doesn't overheat even with both fans disabled.
#59
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Forgive me if this makes any sense, but with all this talk about limiting the boost to keep things even, I havent heard a damn thing about tire or wheel size restrictions.
ways to edgeup/cheat the competition...
LSD/gearing choices
clutches
tire selection (DOT slicks/shaved street tires)
rim selection
"creative" weight removal
uprated bushings
uprated brakes
painted CF body panels
heavily decked head and or block
powdercoated stock color but uprated:
struts/shocks
sway bars
just a few thoughts. either way, creating rules for a series will bring out the most ingenuitive people. Vague rules make for vague control.
ways to edgeup/cheat the competition...
LSD/gearing choices
clutches
tire selection (DOT slicks/shaved street tires)
rim selection
"creative" weight removal
uprated bushings
uprated brakes
painted CF body panels
heavily decked head and or block
powdercoated stock color but uprated:
struts/shocks
sway bars
just a few thoughts. either way, creating rules for a series will bring out the most ingenuitive people. Vague rules make for vague control.
#60
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Forgive me if this makes any sense, but with all this talk about limiting the boost to keep things even, I havent heard a damn thing about tire or wheel size restrictions.
ways to edgeup/cheat the competition...
LSD/gearing choices
clutches
tire selection (DOT slicks/shaved street tires)
rim selection
"creative" weight removal
uprated bushings
uprated brakes
painted CF body panels
heavily decked head and or block
powdercoated stock color but uprated:
struts/shocks
sway bars
just a few thoughts. either way, creating rules for a series will bring out the most ingenuitive people. Vague rules make for vague control.
ways to edgeup/cheat the competition...
LSD/gearing choices
clutches
tire selection (DOT slicks/shaved street tires)
rim selection
"creative" weight removal
uprated bushings
uprated brakes
painted CF body panels
heavily decked head and or block
powdercoated stock color but uprated:
struts/shocks
sway bars
just a few thoughts. either way, creating rules for a series will bring out the most ingenuitive people. Vague rules make for vague control.
That on top of the fact that "limiting boost" one is hard to do...you can always turn the **** on an MBC when no one is looking, plus different turbos can make drastically different numbers on the same boost..You would almost have to have the same mani-dp-turbo-wastegate setup and ban any form of boost control being on the car period.