Paid for 8.5:1 pistons, received 10.5:1, was told I would be fine
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
who was this vendor? sounds much like the experience a friend of mine recently had with pistons.
#23
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
He just PM'ed me and i knew the answer before he said it. Same vendor a friend used. They sent him the wrong size pistons and he had to return them. Now waiting on the new ones and hoping they get it right this time.
#24
#25
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
And end with ab9? Have fun with that exchange man. Ever play phone tag without the other person playing?
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
you know it. You had a nice ordeal on your coilovers with the same people.
#27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Return for correct pistons ( and get reimbursed for the two way shipping).
Running a thicker head gasket will reduce squish, further reducing detonation resistance. IMO that's bad advice from a vendor, particularly of they are supposed to be Miata experts. Never run a thicker head gasket without correcting for proper squish chamber area. That dimension varies depending on rod, piston, rpm, deck height and a few other variables but OEM squish is a good place to start for a turbo engine. N/A, with burly forged rods, we go tighter.
Running a thicker head gasket will reduce squish, further reducing detonation resistance. IMO that's bad advice from a vendor, particularly of they are supposed to be Miata experts. Never run a thicker head gasket without correcting for proper squish chamber area. That dimension varies depending on rod, piston, rpm, deck height and a few other variables but OEM squish is a good place to start for a turbo engine. N/A, with burly forged rods, we go tighter.
__________________
#30
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2016
Location: Philadelphia
Posts: 349
Total Cats: 15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Return for correct pistons ( and get reimbursed for the two way shipping).
Running a thicker head gasket will reduce squish, further reducing detonation resistance. IMO that's bad advice from a vendor, particularly of they are supposed to be Miata experts. Never run a thicker head gasket without correcting for proper squish chamber area. That dimension varies depending on rod, piston, rpm, deck height and a few other variables but OEM squish is a good place to start for a turbo engine. N/A, with burly forged rods, we go tighter.
Running a thicker head gasket will reduce squish, further reducing detonation resistance. IMO that's bad advice from a vendor, particularly of they are supposed to be Miata experts. Never run a thicker head gasket without correcting for proper squish chamber area. That dimension varies depending on rod, piston, rpm, deck height and a few other variables but OEM squish is a good place to start for a turbo engine. N/A, with burly forged rods, we go tighter.
#31
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ugh, how can this **** be real. We keep going back to the guy who can't get **** in order, who would send something out and is all chipper when you want to give him money, then can't make good on his countless mistakes and goes radio silent unless you wanna buy more ****. All excuses aside, this **** doesn't happen to this frequency and what will it take to stop sending him business.
Spend an extra dollar and get your **** from an actual vendor that gives a **** about customers. (949/tse/goodwin)
#BuyFromGreatVendorsAgain
Spend an extra dollar and get your **** from an actual vendor that gives a **** about customers. (949/tse/goodwin)
#BuyFromGreatVendorsAgain
#32
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Standard Cometic is .030
Main reason we sell the Cometic is that is the least expensive, high quality gasket that clears the 85.5 pistons we like so much. OEM is borderline on the 85.0 piston and should always be checked by your pro engine builder.
We offer the two thicker versions for those doing extensive chamber work and fiddling with deck height.
__________________
#33
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ugh, how can this **** be real. We keep going back to the guy who can't get **** in order, who would send something out and is all chipper when you want to give him money, then can't make good on his countless mistakes and goes radio silent unless you wanna buy more ****. All excuses aside, this **** doesn't happen to this frequency and what will it take to stop sending him business.
Spend an extra dollar and get your **** from an actual vendor that gives a **** about customers. (949/tse/goodwin)
#BuyFromGreatVendorsAgain
Spend an extra dollar and get your **** from an actual vendor that gives a **** about customers. (949/tse/goodwin)
#BuyFromGreatVendorsAgain
A good first step would be to remove them from the vendors here. People will go to them because they think we are in support of using them.
#34
#35
#36
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Moderators should be able to decide which vendors contribute to the community, and the value of this forum in particular, as much as they profit. Most every vendor that's invested in selling a full line of parts here participates in Q&A and general tech support. Others are entirely absent.
It is my view, that the vendors that participate add value to this forum. Without them, fewer people would visit the forum. IOW, don't just sell stuff, give stuff back.
It is my view, that the vendors that participate add value to this forum. Without them, fewer people would visit the forum. IOW, don't just sell stuff, give stuff back.
__________________
#37
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
FWIW Moderators don't really get a say in who gets what for vendors. This is a forum run by a larger company (Internet Brands) who get to decide what actually goes on. Moderators can control the content, but don't really have a say in the actual mechanics of how the site is run.
#38
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Moderators should be able to decide which vendors contribute to the community, and the value of this forum in particular, as much as they profit. Most every vendor that's invested in selling a full line of parts here participates in Q&A and general tech support. Others are entirely absent.
It is my view, that the vendors that participate add value to this forum. Without them, fewer people would visit the forum. IOW, don't just sell stuff, give stuff back.
It is my view, that the vendors that participate add value to this forum. Without them, fewer people would visit the forum. IOW, don't just sell stuff, give stuff back.
![](https://i.makeagif.com/media/2-01-2016/oEVWlI.gif?)
#39
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Moderators should be able to decide which vendors contribute to the community, and the value of this forum in particular, as much as they profit. Most every vendor that's invested in selling a full line of parts here participates in Q&A and general tech support. Others are entirely absent.
It is my view, that the vendors that participate add value to this forum. Without them, fewer people would visit the forum. IOW, don't just sell stuff, give stuff back.
It is my view, that the vendors that participate add value to this forum. Without them, fewer people would visit the forum. IOW, don't just sell stuff, give stuff back.
FWIW Moderators don't really get a say in who gets what for vendors. This is a forum run by a larger company (Internet Brands) who get to decide what actually goes on. Moderators can control the content, but don't really have a say in the actual mechanics of how the site is run.
#40
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ugh, how can this **** be real. We keep going back to the guy who can't get **** in order, who would send something out and is all chipper when you want to give him money, then can't make good on his countless mistakes and goes radio silent unless you wanna buy more ****. All excuses aside, this **** doesn't happen to this frequency and what will it take to stop sending him business.
Spend an extra dollar and get your **** from an actual vendor that gives a **** about customers. (949/tse/goodwin)
#BuyFromGreatVendorsAgain
Spend an extra dollar and get your **** from an actual vendor that gives a **** about customers. (949/tse/goodwin)
#BuyFromGreatVendorsAgain
With that being said, I have done a decent amount of business with the company in question here, or individual i should say. And I am by no means defending him, however he has thrown me under the bus on more than one occasion and not felt bad in the slightest about doing so. Been quoted prices, then time comes to pay and the price somehow doubled, but not before I had already sent the part back for exchange leaving me zero room to dispute. He is a super flaky individual and really only wants to answer you if he has something to benefit from it. But on the flip side, I have seen much, MUCH worse customer service/ business from other companies. So although he isnt the greatest customer service wise, hes not the worst either.
Telling a customer to just run the wrong part, a part he never ordered is just wrong....