BE Oil Pump Worth It?
#1
BE Oil Pump Worth It?
So I have a turbo Miata that is primarily a street car that will see track days occasionally throughout the year. I have VVT, turbo, and plan on adding an oil cooler. Rev limit is 7200 RPM.
Probably going to throw some rods and pistons into the motor along with ARP hardware to ensure that the motor will last a good long time without popping. Is upgrading to the Boundary Engineering oil pump worth it? It's an additional $400 expense, and if it's not really going to give me any benefit I'd rather just leave it out. I had a Nissan KA24, fully built with turbo and oil cooler and the stock oil pump never gave me issues, so idk if the Miata oil pump is up to the task.
If I do need the oil pump, how many shims should I get it with?
Probably going to throw some rods and pistons into the motor along with ARP hardware to ensure that the motor will last a good long time without popping. Is upgrading to the Boundary Engineering oil pump worth it? It's an additional $400 expense, and if it's not really going to give me any benefit I'd rather just leave it out. I had a Nissan KA24, fully built with turbo and oil cooler and the stock oil pump never gave me issues, so idk if the Miata oil pump is up to the task.
If I do need the oil pump, how many shims should I get it with?
#2
Yes
____________________________
I feel i should elaborate on this. It is not 100% necessary, the oem one will pump oil and probably be just fine for a good while. But on the flip side if you throw rods and pistons in and hardware and bearings you're in fairly deep already wouldnt you prefer to protect that investment with an oil pump you know will be near failproof.
For reference my block with arp hardware, rods, pistons, bearings, and machining was just under 2500. I would prefer not to do that again so i got a BE pump and a good harmonic balancer.
____________________________
I feel i should elaborate on this. It is not 100% necessary, the oem one will pump oil and probably be just fine for a good while. But on the flip side if you throw rods and pistons in and hardware and bearings you're in fairly deep already wouldnt you prefer to protect that investment with an oil pump you know will be near failproof.
For reference my block with arp hardware, rods, pistons, bearings, and machining was just under 2500. I would prefer not to do that again so i got a BE pump and a good harmonic balancer.
Last edited by matrussell122; 06-12-2019 at 10:12 AM. Reason: Elaboration
#6
Yes
____________________________
I feel i should elaborate on this. It is not 100% necessary, the oem one will pump oil and probably be just fine for a good while. But on the flip side if you throw rods and pistons in and hardware and bearings you're in fairly deep already wouldnt you prefer to protect that investment with an oil pump you know will be near failproof.
For reference my block with arp hardware, rods, pistons, bearings, and machining was just under 2500. I would prefer not to do that again so i got a BE pump and a good harmonic balancer.
____________________________
I feel i should elaborate on this. It is not 100% necessary, the oem one will pump oil and probably be just fine for a good while. But on the flip side if you throw rods and pistons in and hardware and bearings you're in fairly deep already wouldnt you prefer to protect that investment with an oil pump you know will be near failproof.
For reference my block with arp hardware, rods, pistons, bearings, and machining was just under 2500. I would prefer not to do that again so i got a BE pump and a good harmonic balancer.
Unnecessary.
#10
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 21,029
Total Cats: 3,123
Billet pumps were developed out of necessity in the BP engine platform, not for style points. Our very agrarian engines are not smooth like a Honda or Nissan. The engines were designed on a tight budget using many off the shelf parts that originated in the early 80s on a 1.1 liter platform making 50hp.
The pump is necessary for boosted track applications, imo. I've seen the pictures of the carnage.
The pump is necessary for boosted track applications, imo. I've seen the pictures of the carnage.
#11
Billet pumps were developed out of necessity in the BP engine platform, not for style points. Our very agrarian engines are not smooth like a Honda or Nissan. The engines were designed on a tight budget using many off the shelf parts that originated in the early 80s on a 1.1 liter platform making 50hp.
The pump is necessary for boosted track applications, imo. I've seen the pictures of the carnage.
The pump is necessary for boosted track applications, imo. I've seen the pictures of the carnage.
Only reason I ask is that despite people claiming the KA24 has an inadequate oil pump, I never experienced problems on track or on street, despite having oil cooler, turbo, the works.
Now I just need to figure out number of shims necessary, I'm sure BE can provide me with that information unless you guys have a recommendation.
#18
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,193
Total Cats: 1,685
Or buy BE oil pump, use stock damper, save money and still enjoy boost.
I would also never want to attempt to install a damper with the motor in the car. Lack of room will come to make you hate life.
I would also never want to attempt to install a damper with the motor in the car. Lack of room will come to make you hate life.
#20
Other than having to avoid the ARB with the wrench it wasn't too bad. That said, it's not stupidly tight on the nose like the ATI one is supposed to be.