New K24Z3 swap with stock subframe!
#102
Auto donor car is no problem at all. The engines are all the same.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
#104
The first round of kits are shipping today! Expect lots more info from customers in January.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
#108
Full-race makes a turbo k manifold that's reasonably priced. Would pair nicely with the Garrett G's: https://www.full-race.com/store/hond.../fk8-manifold/
#109
Nope, we always use engines from automatic cars. I don't think I've ever gotten one from a manual.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
#110
BMW slaves are on the other side of the bellhousing so a 3" downpipe clears just fine without the trick hydraulic release bearing.
These things can do 400whp at like 10 psi without much effort at all. I had a discussion with our tuner about them, and he told me he had a 9th gen Civic Si on the dyno recently (k24z7, exact same thing as k24z3) and he made 580whp on 100% stock internals. We'll be machining our own turbo adapter for the head soon and I'd like to do a basic 500whp setup in a shop car to explore the potential. $300 engines and transmissions that can handle that kind of power reliably is exciting so we must do it. For science.
These things can do 400whp at like 10 psi without much effort at all. I had a discussion with our tuner about them, and he told me he had a 9th gen Civic Si on the dyno recently (k24z7, exact same thing as k24z3) and he made 580whp on 100% stock internals. We'll be machining our own turbo adapter for the head soon and I'd like to do a basic 500whp setup in a shop car to explore the potential. $300 engines and transmissions that can handle that kind of power reliably is exciting so we must do it. For science.
#112
The oval section of the exhaust should clear with a BMW trans, however in my opinion I would rather see customers run a 3" round exhaust straight down the passenger side of the tunnel. With the PPF deleted, there is enough room to run the exhaust. That's how we did our other turbo car.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
#114
I have been buying this stuff from david for a while now. Someone above asked for pics of oil pan. If you still need i can post. I found locally here in tn. My engine, zf trans, and getrag rear for right at 1k total. It was a little under due to trans and rear being 250 or so each. David has also been super helpful with this the whole time. As soon as the intake manifolds are back in he will be sending it as well and i can post any pics of parts if needed.
Thread
Thread Starter
Forum
Replies
Last Post