New K24Z3 swap with stock subframe!
#81
You can do any custom setup you like so I can't say our products are the only way. But both AC and PS options we offer are the cleanest way to do it, and they do work for the K24Z3 as well.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
#83
With every new update you put out, this swap becomes harder and harder to resist. I've become a sucker for street manners after running poly mounts for a year, then having "downgraded" to Mazdacomp. My enjoyment of the car went up 10x. I've always wanted to do this swap, but after that experience all I could think of was how much vibrations a big 2.4L engine with the balance shafts removed would transmit to through poly mounts.
I can't wait to see the final castings and oil pan. It's seriously starting to look like an OEM delivered package.
I can't wait to see the final castings and oil pan. It's seriously starting to look like an OEM delivered package.
#84
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,760
Total Cats: 631
With every new update you put out, this swap becomes harder and harder to resist. I've become a sucker for street manners after running poly mounts for a year, then having "downgraded" to Mazdacomp. My enjoyment of the car went up 10x. I've always wanted to do this swap, but after that experience all I could think of was how much vibrations a big 2.4L engine with the balance shafts removed would transmit to through poly mounts.
#85
With every new update you put out, this swap becomes harder and harder to resist. I've become a sucker for street manners after running poly mounts for a year, then having "downgraded" to Mazdacomp. My enjoyment of the car went up 10x. I've always wanted to do this swap, but after that experience all I could think of was how much vibrations a big 2.4L engine with the balance shafts removed would transmit to through poly mounts.
I can't wait to see the final castings and oil pan. It's seriously starting to look like an OEM delivered package.
I can't wait to see the final castings and oil pan. It's seriously starting to look like an OEM delivered package.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
#90
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
Saying all that I have a spare chassis that will probably get some sort of KSwap sometime in the next few years.
#93
#97
Honda Engine And Drivetrain Weights - Weight Watchers
2.4L K series: 413 poundsHonda’s 2.4L K-series engines vary a bit from one another. For example, the TSX’s K24A2 that features VTEC on both camshafts weighs in at the top, followed by 2.4L Accord engines and finally the CR-V’s K24Z
So yes,drive train attached on the K motor'
Do you have a way to weigh either of the 2 you just got?
I am trying to get a look at what the weight difference might be. Simply to be able to compare apples and apples.
Do you think the 290 for the BPis fair?
2 other sources are listing the K24Z3 at 412 pounds. It says "engine weight" no notation of transmission attached.
Last edited by Bri1062; 10-29-2019 at 08:11 PM. Reason: content
#98
A fully dressed K24 is about 275 lbs. The 400+ lb numbers you see on the web include a trans, clutch, and flywheel. Guys doing K swaps in a Honda chassis care about that, us not so much.
Our original K24 swap drops 30 lbs from a BP car with AC and PS already deleted. The K24Z3 should be very similar.
Our original K24 swap drops 30 lbs from a BP car with AC and PS already deleted. The K24Z3 should be very similar.
#99
A fully dressed K24 is about 275 lbs. The 400+ lb numbers you see on the web include a trans, clutch, and flywheel. Guys doing K swaps in a Honda chassis care about that, us not so much.
Our original K24 swap drops 30 lbs from a BP car with AC and PS already deleted. The K24Z3 should be very similar.
Our original K24 swap drops 30 lbs from a BP car with AC and PS already deleted. The K24Z3 should be very similar.
Excellent information! Thanks for coming up and replying to my inquiry,