My new intake manifold!
#24
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Chicagoland
Posts: 1,376
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
And it costs .2 cents to make a hundred dollar bill....
Not to worried about it if it's worth the money, but I will find out soon enough. When I get around to putting it on (this weekend) I will take pictures, and after I data logg a bit I will post dyno results.
Not to worried about it if it's worth the money, but I will find out soon enough. When I get around to putting it on (this weekend) I will take pictures, and after I data logg a bit I will post dyno results.
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
$50 for labor is like 1/2hr for a good fabricator. I would love to see you fit up, prep the metal, set up your work station, weld, etc anything in 1/2 hr. I bet that took at least 3-4hrs minimum to make. As far as I know Rob at flipside isnt churning these out like a chinese factory so they are all custom one offs. There is going to be premium for that. Plus its great quality, from a great guy.
#27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah, really, it's much more expensive than it seems at first. I, too, thought that I could build an intake manifold cheaply. Guess what, it ended up costing me almost $400 in parts and machining costs alone. Add to that the cost of getting it welded (unless you can weld aluminum yourself) and what you value your own time (minimum wage? Definitely not...).
Here is a picture of mine:
![](http://www.ferdster.com/94ProLX/misc/diy_intake_manifold/progress_14.jpg)
Here is a page with a lot of pictures from start to finish.
Obviously, from looking at the pic, it's not for a Miata, but its cousin (brother?), a Protege (BP4W head).
I took a lot of ideas for my design from that long intake manifold thread and was planning on getting it flow benched, but the only local shop I could find wanted over $300 for just the setup fee alone.
--Ferdi
Here is a picture of mine:
![](http://www.ferdster.com/94ProLX/misc/diy_intake_manifold/progress_14.jpg)
Here is a page with a lot of pictures from start to finish.
Obviously, from looking at the pic, it's not for a Miata, but its cousin (brother?), a Protege (BP4W head).
I took a lot of ideas for my design from that long intake manifold thread and was planning on getting it flow benched, but the only local shop I could find wanted over $300 for just the setup fee alone.
--Ferdi
#28
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I figured it was going to be $300-400 in parts (plenum, trumpets, flange and runners since I don't feel like re-using the stock flange because it looks ugly), plus weld costs. And I still wouldn't have a manifold with any flow figures. I don't want flow-bench, a Solidworks drawing would satisfy me. Nobody will produce even that - it's like they just slapped a plenum on and put it on sale without doing any sort of R&D or engineering of any sort.
If that offends you because you make an intake manifold for the Miata, and you actually did R&D and you have flow numbers, I have two suggestions:
1. Advertise better
2. Tell me where I should Paypal you
If that offends you because you make an intake manifold for the Miata, and you actually did R&D and you have flow numbers, I have two suggestions:
1. Advertise better
2. Tell me where I should Paypal you
#29
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah, really, it's much more expensive than it seems at first. I, too, thought that I could build an intake manifold cheaply. Guess what, it ended up costing me almost $400 in parts and machining costs alone. Add to that the cost of getting it welded (unless you can weld aluminum yourself) and what you value your own time (minimum wage? Definitely not...).
Here is a picture of mine:
![](http://www.ferdster.com/94ProLX/misc/diy_intake_manifold/progress_14.jpg)
Here is a page with a lot of pictures from start to finish.
--Ferdi
Here is a picture of mine:
![](http://www.ferdster.com/94ProLX/misc/diy_intake_manifold/progress_14.jpg)
Here is a page with a lot of pictures from start to finish.
--Ferdi
#30
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Might look small because the tb opening is huge - 75mm (I got an awesome deal on a new 75mm Edelbrock tb). The base is 4" wide and the top is out of a 4" tube. I used a Magnus manifold made for a DSM as my template for the plenum. It ended up right around 2.5 liters, which might be a tad smaller than the Magnus because my plenum has a round top instead of being bent sheet metal. Researching online, I found recommendations from anything between 1-3 times engine displacement for FI. So mine might be on the smaller end, but compared to what I had stock, it's huge.
--Ferdi
--Ferdi
Thread
Thread Starter
Forum
Replies
Last Post