How warm before High RPM, Boost?
#1
Retired Mech Design Engr
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,011
Total Cats: 859
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What are the guidelines to prevent pre-mature wear or failure of engine / drivetrain during cold weather. I am using 0W-40 oil.
Presently I do limit RPM's according to CLT, but full boost is still available, right from the start.
Should I be using restraint until at full operating temp? By full perating temp, I would mean anything over 180*F, based on use of such thermostats by those who track and race.
Presently I do limit RPM's according to CLT, but full boost is still available, right from the start.
Should I be using restraint until at full operating temp? By full perating temp, I would mean anything over 180*F, based on use of such thermostats by those who track and race.
#7
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I back into my garage at night so that I can hit boost pulling out in the morning.
Not that I recommend this to others, but it seems to work for me.
#12
Retired Mech Design Engr
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,011
Total Cats: 859
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This I can add. I spent a lot of time tuning EAE temp compensation holding AFR's during any boost / temp scenarios I might encounter. So, the car doesn't feel cold even when it is. When I was N/A, it felt like it was stiff when cold, so warming it up with gentle driving seemed natural.
The manual says crank, wait 10 seconds, drive. I didn't see anything else about taking things easy. But that is N/A.
As far as boost warming things up. If I am at 160* CLT and make a single boost run up to 6K, CLT goes straight to 190*. Braineack and Deezums are 100% right about that.
I remember when Scott also said that he boosts in the driveway, so I kind of thought he might have that perspective.
Like so many other questions, many answers.
I think I will tend to leave things as they are, which is to say be more concerned with low temp RPM than low temp throttle; not go crazy with cold power, but not beat myself up if I feel the need to punch it.
In for more thoughts / experiences.
The manual says crank, wait 10 seconds, drive. I didn't see anything else about taking things easy. But that is N/A.
As far as boost warming things up. If I am at 160* CLT and make a single boost run up to 6K, CLT goes straight to 190*. Braineack and Deezums are 100% right about that.
I remember when Scott also said that he boosts in the driveway, so I kind of thought he might have that perspective.
Like so many other questions, many answers.
I think I will tend to leave things as they are, which is to say be more concerned with low temp RPM than low temp throttle; not go crazy with cold power, but not beat myself up if I feel the need to punch it.
In for more thoughts / experiences.
#13
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
How significant this really is with synthetic multi-weight oils on a modern street engine, I have no idea. BMW cared enough about it to have a variable redline on some cars based on oil temp. Real race cars have external oil pre-heaters that get run for a while before they start the engine.
--Ian
#15
Retired Mech Design Engr
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,011
Total Cats: 859
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Emilio, I presume the tstat you are referring to is the coolant tstat, and therefore are saying that even Vlad is not being conservative enough, i.e. waiting for coolant to come to temp may not be enough to get the oil to 120*, which is the important criteria.
If so, I'm also hearing that pulling the "oil heater" hoses off the engine, a common practice, may not be the right thing to do, as far as warm-up is concerned.
If so, I'm also hearing that pulling the "oil heater" hoses off the engine, a common practice, may not be the right thing to do, as far as warm-up is concerned.
#16
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I spent a handful of years working in a machine shop building prototype surgical tools and short production runs of exotic weirdness jobs my boss would quote. I'm not an engineer or a metallurgist, but I have seen first hand what thermal expansion does to things like aluminum. For that reason alone, I warm up my car in the morning.
I'll also be leaving the stock Miata oil cooler/preheater in place when I build my engine. Some people remove it as a "failure point" but its something I'm willing to tolerate for perceived benefits.
^^ Emilio gets it. I know you can set up a custom limiter in the MS3 if you add an oil temp sender to it, or you can add a low temp indicator light as a visual warning and use the big limiter between your ears
I'll also be leaving the stock Miata oil cooler/preheater in place when I build my engine. Some people remove it as a "failure point" but its something I'm willing to tolerate for perceived benefits.
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
#17
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: Oct 2013
Location: Goleta, Southern California
Posts: 520
Total Cats: 27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wait for oil temp to hit 180. I try to stay out of boost until then. Maybe conservative but with forged pistons it makes me feel all warm a fuzzy to know they are expanded a bit before I bring the pain.
#20
Elite Member
iTrader: (1)
Join Date: Apr 2014
Location: SF Bay Area, CA
Posts: 3,098
Total Cats: 558
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
[QUOTE=EO2K;1188775]I have seen first hand what thermal expansion does to things like aluminum. For that reason alone, I warm up my car in the morning.
I have to agree with EO2K about thermal expansion, the piston expands before the head, which expands before the iron block. If you don't wait until your oil is around 150 or your street car is fully warmed up, your pistons will loose some of their clearance with the block and wear prematurely. Possibly leading to piston noise
I have to agree with EO2K about thermal expansion, the piston expands before the head, which expands before the iron block. If you don't wait until your oil is around 150 or your street car is fully warmed up, your pistons will loose some of their clearance with the block and wear prematurely. Possibly leading to piston noise
![vash](https://www.miataturbo.net/images/smilies/vash.gif)