How much Hp is my injector good for?
#25
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,922
Total Cats: 402
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You can use Mike Moran's injectors. 5250cc/min for $335 or 2460cc/min for $190
Baller Billet Injectorizer
Baller Billet Injectorizer
#27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You can use Mike Moran's injectors. 5250cc/min for $335 or 2460cc/min for $190
Baller Billet Injectorizer
Baller Billet Injectorizer
Try these:
9,000cc.
That's not a typo.
Capable of 200psi fuel pressure.
Should get the job done
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
Last edited by 18psi; 03-26-2018 at 12:30 PM.
#28
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ok well i am currently in low tens afr.
I guess if i lean up to high 11afr and richen up with meth then i get 10pct more fuel.
That means i can run uh 38.5psi and that is wihout having to use meth as fuel.
Lemme see how that goes. Should put me well over 600.
I guess if i lean up to high 11afr and richen up with meth then i get 10pct more fuel.
That means i can run uh 38.5psi and that is wihout having to use meth as fuel.
Lemme see how that goes. Should put me well over 600.
#33
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Would it be possible to fabricate a set of intake runner with 2 injector ports per runner? For example, one in the normal place and another on the bottom? It wouldn't do good things to spray pattern, but I doubt that 2000cc injectors have particularly good patterns either.
Keep in mind they get better spray patterns as you turn up the pressure. I'll bet an ID2000 at 70psi is probably more consistent than an old pos rx7 460 injector.
#34
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm almost positive a 2000cc injector in proper location will be better than 2 1000's in remote locations. Also he'd be spending 3 times as much money at that point.
Keep in mind they get better spray patterns as you turn up the pressure. I'll bet an ID2000 at 70psi is probably more consistent than an old pos rx7 460 injector.
Keep in mind they get better spray patterns as you turn up the pressure. I'll bet an ID2000 at 70psi is probably more consistent than an old pos rx7 460 injector.
#35
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ID1000s at 70psi base should support ~700bhp on gas and 450bhp on E85.
#39
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ok so in conclusion i will see what i can squeeze out of these injectirs.
If not enough then i will get the fic injectors or whatever.
All i want to do is spin the wheels in 6th. Is that too much to ask?
If not enough then i will get the fic injectors or whatever.
All i want to do is spin the wheels in 6th. Is that too much to ask?