high compression e85 turbo bp?
#42
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Because "that" is a drastic over-generalization and what n00bs throw out when they have no idea about a specific engine design and try to apply their general "knowledge" of how an internal combustion engine works to a specific one.
If you really think different 4 cylinder engines, used in different applications, make power the same way, you need to just stop posting.
So I ask you again, how many high powered BP's have you built? I'll make it even easier for you: how many have you built or tuned over a measly 200whp?
He's trying so hard to be smart that he's in denial about being dumb. You can't skip the painful step of acknowledgement
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
#43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What if I told you.... that we see through the bullshit. As others have said already, Timing > Compression on our motors. We have found that ~8.6:1 is about the ratio you need for pump gas to get the maximum benefits of timing before reaching det. So in short, while using pump gas, lower compression will net you better numbers until you hit this threshold on our motors.
#44
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This, this right here makes me believe that Tork is one of those FSAE kids from a school where the alumni design a crazy carbon monocoque car with super duper aero, and the school has paid machine shop workers build the car because the students arent allowed to touch the machines. And then they get coached on what to say in design by those alumni, because one of the things drilled in during that coaching is the car has an Engine in is, motors move your windshield wipers.
Hey if the SAE is such a stickler about calling it an engine why do I fill it with SAE5w20 MOTOR oil.
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
#45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If that kind of time and expense is in your budget, then it is a viable option. If not, stick with the tamer compression.
Keep in mind that high compression big camshaft motors are volatile, and do not take kindly to tuning mistakes. If you lack experience, I would suggest sticking with a tamer motor, and as you build experience work your way up to the big boy stuff.
Keep in mind that high compression big camshaft motors are volatile, and do not take kindly to tuning mistakes. If you lack experience, I would suggest sticking with a tamer motor, and as you build experience work your way up to the big boy stuff.
Well I'm pretty experienced with tuning/building the bp I just wanted to see if anyone had concrete info on 400whp + e85 setups. My last setups made 300+ whp on hydraulic bp05 head and high boost so I expect a lot more power now. So what do you guys think about the cylinder pressures on low comp high boost (30lbs) e85 vs med comp high boost e85(30lbs). I doubt less power and better off boost transient response, but what about head lifting, etc? Thanks
Anyways, it looks like you have enough know how to go into unfamiliar territory. Do it. I would love to see more really big horsepower BPs.
BPs are not really known for head gasket issues. Eventually you will get to a point that you may need to address head lifting, but you will have to be well past the 400 hp mark. There are enough well past 500 that did not need any exotic modifications to prevent lifting, as far as I know.
#46
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
With the BP, the timing you give up to run higher compression is worth more than the power you gain back from the compression itself. It's better to have the timing than the compression. It's very simple.
#47
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,019
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks for the clarification on my motor Vlad.
I think the issue here is that the locals are being more specific than Tork, but tork thinks he's being more specific. Tork is talking about basic principles, while savington and crew are describing how to apply those basic principles to our tuning challenge.
Tork , NOBODY here is saying to take a BP setup running a stock block and 2560 at 14 psi and drop the compression to make more power without any other changes. You drop compression in order to increase boost and make timing more aggressive. In fact, even this is not BP specific: this has been basic big-power S.O.P for gasoline for ages. Drop compression to 8.5:1 or so, increase boost and advance timing, profit. E85 changes that a bit due to its anti-knock properties.
Quit taking one phrase and blanketing it. You don't appear smart. Get out of your box and quit being so damned pig headed.
I think the issue here is that the locals are being more specific than Tork, but tork thinks he's being more specific. Tork is talking about basic principles, while savington and crew are describing how to apply those basic principles to our tuning challenge.
Tork , NOBODY here is saying to take a BP setup running a stock block and 2560 at 14 psi and drop the compression to make more power without any other changes. You drop compression in order to increase boost and make timing more aggressive. In fact, even this is not BP specific: this has been basic big-power S.O.P for gasoline for ages. Drop compression to 8.5:1 or so, increase boost and advance timing, profit. E85 changes that a bit due to its anti-knock properties.
Quit taking one phrase and blanketing it. You don't appear smart. Get out of your box and quit being so damned pig headed.
Last edited by turbofan; 04-17-2013 at 12:14 PM. Reason: typos fixed
#48
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Tork , NOBODY here is saying to take a BP setup running a stock block and 2560 at 14 psi and drop the compression to make more power without any other changes. You drop compression in order to increase boost and make timing more aggressive. In fact, even this is not BP specific: this has been basic big-power S.O.P for gasoline for ages. Drop compression to 8.5:1 or so, increase boost and advance timing, profit. E85 changes that a bit due to its anti-knock properties.
Quit taking one phrase and blanketing it. You don't appear smart. Get out of your. Six and quit being so damned pig headed.
Quit taking one phrase and blanketing it. You don't appear smart. Get out of your. Six and quit being so damned pig headed.
#51
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You guys cannot actually be serious. So your telling me that if I were to boost my 1.8L I should lower my compression...which in turn would do absolutely nothing because there would be no "overfilling of the combustion chamber" to create power? Well for all that I might as well run N/A...but running N/A is pointless because I would still run low compression...hence not making any type of power...I mean so far from this thread thats what I have learned...low compression=power...am i correct?
#53
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You guys cannot actually be serious. So your telling me that if I were to boost my 1.8L I should lower my compression...which in turn would do absolutely nothing because there would be no "overfilling of the combustion chamber" to create power? Well for all that I might as well run N/A...but running N/A is pointless because I would still run low compression...hence not making any type of power...I mean so far from this thread thats what I have learned...low compression=power...am i correct?
same idiot as Tork using different sign on
his idiot friend
???
I'm leaning towards 1 and 2.
#55
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You guys cannot actually be serious. So your telling me that if I were to boost my 1.8L I should lower my compression...which in turn would do absolutely nothing because there would be no "overfilling of the combustion chamber" to create power? Well for all that I might as well run N/A...but running N/A is pointless because I would still run low compression...hence not making any type of power...I mean so far from this thread thats what I have learned...low compression=power...am i correct?
#56
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You've got to be kidding me. I've been further even more decided to use even go need to do look more as anyone can. Can you really be far even as decided half as much to use go wish for that? My guess is that when one really been far even as decided once to use even go want, it is then that he has really been far even as decided to use even go want to do look more like. It's just common sense.
![](https://www.miataturbo.net/images/smilies/bowrofl.gif)
Flawless logic
+Props
#57
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ok before you ban me or whatever it is you people do to guys who know what they are talking about, answer me something. simple question really...when has lowering compression ever made sense when we are talking about making power. I want as much "bang" in that cylinder as possible...and high compression and a good amount of boost will do so...please explain to me how low compression will have the same effect...because in my mind low compression and power do not mix.
#58
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ok before you ban me or whatever it is you people do to guys who know what they are talking about, answer me something. simple question really...when has lowering compression ever made sense when we are talking about making power. I want as much "bang" in that cylinder as possible...and high compression and a good amount of boost will do so...please explain to me how low compression will have the same effect...because in my mind low compression and power do not mix.
That is, if you ignore that other thing that makes motors run.
That being... you know... ignition.
#59
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ok before you ban me or whatever it is you people do to guys who know what they are talking about, answer me something. simple question really...when has lowering compression ever made sense when we are talking about making power. I want as much "bang" in that cylinder as possible...and high compression and a good amount of boost will do so...please explain to me how low compression will have the same effect...because in my mind low compression and power do not mix.