Fracking clutch slippage... [Joe Perez swore in a thread title!]
#8
Thread Starter
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,502
Total Cats: 6,906
From: Chicago. (The less-murder part.)
The current clutch is an ACT "HD" package, in the 1.6 size; ZM1-HDMM. I guess they really are serious about it being good for only 200 ft/lbs. It's got maybe 15,000 miles on it, and only just started slipping recently.
I've got the FM stage 2 clutch and a 1.8 flywheel sitting on the shelf. They were intended for Jessica (which is still in pieces) however they may be going into the '92 now...
Also, nice edit on the title. Ok, I broke the rules...
I've got the FM stage 2 clutch and a 1.8 flywheel sitting on the shelf. They were intended for Jessica (which is still in pieces) however they may be going into the '92 now...
Also, nice edit on the title. Ok, I broke the rules...
#9
I have a buddy who has a 1.8 Spec Stage 3 and Fidanza f/w for sale. He wants only $250 for the set. WTS: Clutch and Flywheel - MX5 Miata Atlanta Owners Club
That should hold you just fine, and allow you to keep the new clutch aside so you can get the new motor assembly spin balanced with the clutch installed.
That should hold you just fine, and allow you to keep the new clutch aside so you can get the new motor assembly spin balanced with the clutch installed.
#11
Thread Starter
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,502
Total Cats: 6,906
From: Chicago. (The less-murder part.)
cardriverx offers an interesting point about the weather. It's been in the 30s and 40s the past few days here, and I am running about 15 PSI at the moment. I may wait until I get back out to San Diego and warmer temps (leaving in exactly one week) to see if the problem miraculously goes away.
As an aside, I'm constantly amazed that this engine has held together for as long as it has. I'd have thought for sure that my rods would have been pretzeled by now. I really need to get on a dyno and see just what she's putting out.
Hmmm.
(Plus, the thing's got 31,000 miles on it...)
Tempting, though. I might.
Of course.
As an aside, I'm constantly amazed that this engine has held together for as long as it has. I'd have thought for sure that my rods would have been pretzeled by now. I really need to get on a dyno and see just what she's putting out.
Hmmm.
Stage 3 Heavily modified street and race engines. Offers sufficient daily driveability with comfortable pedal feel and quick engagement. Offers good wear characteristics under low and high stress usage. High clamp pressure plate, 4 or 6 puck carbon semi-metallic friction with high sprung hub and disc assembly, bearing and tool kit. 6 puck is standard on most applications, but 4 puck can be specified when ordering.
"Sufficient" driveability and a six-puck metallic disc... Anybody have any first-hand experience with one of these? (Plus, the thing's got 31,000 miles on it...)
Tempting, though. I might.
Of course.
#12
my brother had a stage 3 clutch in his 240sx sr20 swap, with a fidanza resurfaced fw. the pedal feel was kinda heavy, definitely something to get used to. but you will not have clutch slipping problems whatsoever.
my friends civic had a stage 5 clutch, and thats nowhere near daily driveable. just to give you a range.
my friends civic had a stage 5 clutch, and thats nowhere near daily driveable. just to give you a range.
#13
my brother had a stage 3 clutch in his 240sx sr20 swap, with a fidanza resurfaced fw. the pedal feel was kinda heavy, definitely something to get used to. but you will not have clutch slipping problems whatsoever.
my friends civic had a stage 5 clutch, and thats nowhere near daily driveable. just to give you a range.
my friends civic had a stage 5 clutch, and thats nowhere near daily driveable. just to give you a range.
'Stage' is not a measurement of anything, not if you exist in reality that is.
P.S. Ricers dont exist in reality.
#16
Thread Starter
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,502
Total Cats: 6,906
From: Chicago. (The less-murder part.)
I'm as ---- as the next guy about labeling things as "Stage X", but in this case, it genuinely is the official model designation of the clutch package in question: SPEC Clutches & Flywheels
#17
DEI liberal femininity
iTrader: (8)
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
"carbon graphite semi metallic" sounds tame, but the pictures dont look nearly black enough.
it looks more like a ceramic-metallic which is about as tame as a rabid tiger with a samurai sword tied to its tail with a dwarf carrying two sawed off shotguns on its back.
if I were buying a new clutch today, there is only one option.
it looks more like a ceramic-metallic which is about as tame as a rabid tiger with a samurai sword tied to its tail with a dwarf carrying two sawed off shotguns on its back.
if I were buying a new clutch today, there is only one option.
#20
He's running an intercooled MP62, no more than 200 whp, and he has a long highway commute to work. Just thought that it would be a really good, really cheap solution for you...
Yeah, I'd probably prefer to have one of Emilo's twin disc set ups, but they happen to be $800 more expensive.