EGR solenoid - bogging issue
#1
Junior Member
Thread Starter
iTrader: (-1)
Join Date: Apr 2008
Location: Southern California
Posts: 423
Total Cats: 16
EGR solenoid - bogging issue
The car is bucking or bogging. Heard the solenoid can be the issue. I bypassed the solenoid and the issue went away. I then replaced the solenoid and undid the bypass, and the issue returned. Thinking that it's an EGR issue instead, I unplugged the EGR harness. The issue remained. I plugged the EGR back in and bypassed the newly replaced solenoid and the issue went away.
Is there another issue that I'm missing? And is it ok to drive with the solenoid bypassed?
Is there another issue that I'm missing? And is it ok to drive with the solenoid bypassed?
#2
Junior Member
Thread Starter
iTrader: (-1)
Join Date: Apr 2008
Location: Southern California
Posts: 423
Total Cats: 16
IM and corresponding ports had been cleaned recently. The vacuum hose that goes from the boost solenoid to the IM had been routed to the upper nipple long ago. I took apart the EGR sensor and cleaned it out thoroughly and nothing was stuck, etc. Put everything back together as it should, and the bog remains. Is the boost sensor itself having a problem?
Thread
Thread Starter
Forum
Replies
Last Post
ApexOnYou
DIY Turbo Discussion
11
07-27-2007 01:46 PM