destroyed supercharged '94.
#22
Elite Member
iTrader: (2)
Join Date: Jun 2009
Location: Istanbul, Turkey
Posts: 3,224
Total Cats: 1,705
On another note, if I'm reading these instructions right, he had the power card hooked up pre supercharger, not post. Pinched line or not, I don't think the power card was ever going to see boost.
I'm not looking at the engine bay, but if I remember correctly it was connected at the 180* pipe. Not sure why I didn't catch that before.
http://www.mossmotors.com/graphics/p...ns/999-170.pdf
I'm not looking at the engine bay, but if I remember correctly it was connected at the 180* pipe. Not sure why I didn't catch that before.
http://www.mossmotors.com/graphics/p...ns/999-170.pdf
That, right there is the problem.
#24
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,781
Total Cats: 642
Curly, you are awesome and all.. but I think you are being way too nice. That is very clearly an engine destroyed by bad tuning and is of NO FAULT to the engine builder.
Either way, subbed for rebuild story and pics
Either way, subbed for rebuild story and pics
#25
Cpt. Slow
Thread Starter
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,429
Total Cats: 1,207
I wasn't going to let it rot with an engine I built in it, that's no way to treat a Miata, much less a '94R. Yes, I should have/could have demanded money again, but I know he doesn't have much to give, so it's either this or it sits their being useless.
The only other option I considered was buying it off him cheap and flipping it or parting it. There's a decent ACT clutch, torsen, bilsteins, etc. But I didn't want to rob him of his pride and joy too quickly.
I'm not planning on putting a cent into it this time around. So far I haven't, in fact I've profited $4 AND he bought me two rolls of shop towels, which I have no intention of using up all on this build. So there's a win right there...
I need to get a quote from my head guy after Christmas to find out how much a milling and hot tanking costs. Normally I might not hot tank it, but if it's there, I might as well get out any shavings left from the destruction that I can. Another local Portland shop makes it sound like it'll be around $65, which would be awesome.
The only other option I considered was buying it off him cheap and flipping it or parting it. There's a decent ACT clutch, torsen, bilsteins, etc. But I didn't want to rob him of his pride and joy too quickly.
I'm not planning on putting a cent into it this time around. So far I haven't, in fact I've profited $4 AND he bought me two rolls of shop towels, which I have no intention of using up all on this build. So there's a win right there...
I need to get a quote from my head guy after Christmas to find out how much a milling and hot tanking costs. Normally I might not hot tank it, but if it's there, I might as well get out any shavings left from the destruction that I can. Another local Portland shop makes it sound like it'll be around $65, which would be awesome.
#28
Elite Member
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
Don't work on shitty setups unless you have the customer sign some sort of waiver of liability or at least acknowledgment that you told him that he's gonna have a bad time. e.g. "Customer acknowledges I recommended against running the aftermarket supercharger setup without a properly functioning wideband air/fuel gauge." Or something that warranties only for builder error, not tuner error (and specify "e.g. detonation"). It may or may not hold up in any kind of court, but some documentation is better than nothing.
In my business, we do something in the same concept. If a client comes to me and says, "I want to buy XYZ penny stock," I spend a lot of time trying to talk them out of it with ample experiental and evidential reasons. If they insist, we process the order and it is clearly marked "unsolicited" (meaning I did not recommend it) and we have them sign a letter that says, in so many words, that I told the client this was a bad idea.
Good on you for trying to find a reasonable compromise and erring on the side of doing right by the customer. It's a process to learn where the right middle ground is.
#29
Cpt. Slow
Thread Starter
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,429
Total Cats: 1,207
I would of never been able to stop. With my personality, there was no way I would of rebuilt the original engine, known that it had blown up, and been able to say "too bad". So recommending him to a real shop would of been the best solution. I think he had issues with one of the better shops around though, didn't get along with the owner. Lucky for me, I get along with everyone.
#30
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,104
In my business, we do something in the same concept. If a client comes to me and says, "I want to buy XYZ penny stock," I spend a lot of time trying to talk them out of it with ample experiental and evidential reasons. If they insist, we process the order and it is clearly marked "unsolicited" (meaning I did not recommend it) and we have them sign a letter that says, in so many words, that I told the client this was a bad idea.
Back when we were still building a lot of cars in 2010-2011, we would refuse to do stupid things, regardless of what the customer insisted on. If they insisted on a piggyback to control their new turbo kit, we insisted on not working on it. It might be your money, but it's my reputation. Most of our customers understood this and were thrilled with the results. A few of them argued with us and were cordially sent on their way. I don't lose a wink of sleep over turning down business like that.
That philosophy extends into my business today as well. I sell expertise first and parts second.
IIRC it's Enzo Ferrari that spoke the famous word: "The client is not always right."
#32
The problem is that the customers who are stupid enough to make the bad decisions are the same ones who will turn around and blame you publicly for it. Regardless of what you have on paper, it becomes a he-said she-said in the court of public opinion.
Back when we were still building a lot of cars in 2010-2011, we would refuse to do stupid things, regardless of what the customer insisted on. If they insisted on a piggyback to control their new turbo kit, we insisted on not working on it. It might be your money, but it's my reputation. Most of our customers understood this and were thrilled with the results. A few of them argued with us and were cordially sent on their way. I don't lose a wink of sleep over turning down business like that.
That philosophy extends into my business today as well. I sell expertise first and parts second.
IIRC it's Enzo Ferrari that spoke the famous word: "The client is not always right."
Back when we were still building a lot of cars in 2010-2011, we would refuse to do stupid things, regardless of what the customer insisted on. If they insisted on a piggyback to control their new turbo kit, we insisted on not working on it. It might be your money, but it's my reputation. Most of our customers understood this and were thrilled with the results. A few of them argued with us and were cordially sent on their way. I don't lose a wink of sleep over turning down business like that.
That philosophy extends into my business today as well. I sell expertise first and parts second.
IIRC it's Enzo Ferrari that spoke the famous word: "The client is not always right."
#33
Ugh, I feel for you Bro.. While it doesn't look like that damage was caused by any of your work, as the guy who rebuilt a motor that melted down you're sort of on the hook for it. Thats a **** deal, but I admire you putting your rep first.
That having been said, I should probably repeat what others above have said; one of the keys to running a successful business (even a side business) is to know when to ditch a fool. I routinely pass up on projects where the owner comes off like an idiot or wants me to do something that I'm not feeling. The objective is to have happy customers, not just activity, and while it feels counter-intuitive to growing a customer base to turn away work, in a lot of cases it's far more practical to do so. Doing quality work is enough trouble without some moron in the mix to **** it up, a principle that extends from the people you hire or work with, people you buy from, and indeed, those you sell to.
That having been said, I should probably repeat what others above have said; one of the keys to running a successful business (even a side business) is to know when to ditch a fool. I routinely pass up on projects where the owner comes off like an idiot or wants me to do something that I'm not feeling. The objective is to have happy customers, not just activity, and while it feels counter-intuitive to growing a customer base to turn away work, in a lot of cases it's far more practical to do so. Doing quality work is enough trouble without some moron in the mix to **** it up, a principle that extends from the people you hire or work with, people you buy from, and indeed, those you sell to.
#34
The problem is that the customers who are stupid enough to make the bad decisions are the same ones who will turn around and blame you publicly for it. Regardless of what you have on paper, it becomes a he-said she-said in the court of public opinion.
Back when we were still building a lot of cars in 2010-2011, we would refuse to do stupid things, regardless of what the customer insisted on. If they insisted on a piggyback to control their new turbo kit, we insisted on not working on it. It might be your money, but it's my reputation. Most of our customers understood this and were thrilled with the results. A few of them argued with us and were cordially sent on their way. I don't lose a wink of sleep over turning down business like that.
That philosophy extends into my business today as well. I sell expertise first and parts second.
IIRC it's Enzo Ferrari that spoke the famous word: "The client is not always right."
Back when we were still building a lot of cars in 2010-2011, we would refuse to do stupid things, regardless of what the customer insisted on. If they insisted on a piggyback to control their new turbo kit, we insisted on not working on it. It might be your money, but it's my reputation. Most of our customers understood this and were thrilled with the results. A few of them argued with us and were cordially sent on their way. I don't lose a wink of sleep over turning down business like that.
That philosophy extends into my business today as well. I sell expertise first and parts second.
IIRC it's Enzo Ferrari that spoke the famous word: "The client is not always right."