96 Miata obd2 crank no start
#1
96 Miata obd2 crank no start
Last thread wasn't very much detailed on my problem so here i go again.
I have a 96 Miata. The OG engine started knocking like crazy from the PO which didn't seem to take care of it but I was still running nothing wrong but the knock. I found a used engine at the pick a part replace seals,clutch,water pump,timing belt,etc. I transfer all the sensors from the OG motor cas,maf,cps,coil pack injectors and hooked them all up. Now that I want to start the engine it cranks but no run I have check for fuel and spark and no luck. I'm stuck and I can't seem to figure it out I appreciate all your guys input thanks
I have a 96 Miata. The OG engine started knocking like crazy from the PO which didn't seem to take care of it but I was still running nothing wrong but the knock. I found a used engine at the pick a part replace seals,clutch,water pump,timing belt,etc. I transfer all the sensors from the OG motor cas,maf,cps,coil pack injectors and hooked them all up. Now that I want to start the engine it cranks but no run I have check for fuel and spark and no luck. I'm stuck and I can't seem to figure it out I appreciate all your guys input thanks
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
7
11-03-2015 01:51 PM
AlwaysBroken
Engine Performance
4
09-04-2015 01:35 PM