Connector Witch Hunt
#242
Ballenger Motorsports - High Performance Electronics
If you can get us images, part numbers, vehicle application etc we can check it specifically.
#243
Good to know on the wiring, the service manual just offered wire colors and the Mazda diagrams leave a lot to be desired compared GM for example.
#244
Added some coil and coil connector information. We are stocking the GM Truck Coils & Toyota COPs new... obviously they are cheaper used so will see how that works out.
Ballenger Motorsports - High Performance Electronics
Ballenger Motorsports - High Performance Electronics
#245
This might not solve all of your connector woes but we stock a couple of the handy ones.
LINK: Coil On Plug & Ignition
LINK: Coil On Plug & Ignition
#247
I did some reading in the connector witch hunt thread and have seen the online excel sheet for the connectors. I am looking for a male end connector for the 1995 Miata coil pack. I see the same type of connector on the 1995 Miata cam sensor. If I could find that male version that is fastened to the cam sensor housing, it would work fine. My goal is to built my own ignition harness without cutting up the factory harness. I'm no where near a parts yard. If I missed this information somewhere on this website - sorry. Below is the plug that I want to connect INTO:
4-Way Receptacle Kit
The description said that the mating half is not available. It is the mating half I am looking for. If this connector is unavailable anywhere, what is the method being used to hook into an OEM harness without cutting into it?
4-Way Receptacle Kit
The description said that the mating half is not available. It is the mating half I am looking for. If this connector is unavailable anywhere, what is the method being used to hook into an OEM harness without cutting into it?
#253
If you have full part numbers I have found that Octopart is a good place to find items in stock.
Datasheets, Electronic Parts, Components, Search - Octopart
They even list the ECU connector parts...
Datasheets, Electronic Parts, Components, Search - Octopart
They even list the ECU connector parts...
#254
Haven't put them up yet on the Miata list we keep updated but the 4 way coil connectors, 3 way coil connectors, 4 way subharness connectors and 2 way ABS/Knock connectors are on the site and somewhat recently added. Just to cover the below, a connector housing is housing + lock only. Kit is with terminals and seals for you to crimp, pigtails come with 12" / 305mm wire leads and preassembled for those without enough harness length or crimp tools.
4 way subharness plug
Ballenger Motorsports - High Performance Electronics
4 way ignition subharness receptacle
Ballenger Motorsports - High Performance Electronics
2 way abs/knock plug
Ballenger Motorsports - High Performance Electronics
2 way abs/knock receptacle
Ballenger Motorsports - High Performance Electronics
3 & 4 way coil connectors:
Ballenger Motorsports - High Performance Electronics
We had a lot of people asking for these parts, so here they are!
4 way subharness plug
Ballenger Motorsports - High Performance Electronics
4 way ignition subharness receptacle
Ballenger Motorsports - High Performance Electronics
2 way abs/knock plug
Ballenger Motorsports - High Performance Electronics
2 way abs/knock receptacle
Ballenger Motorsports - High Performance Electronics
3 & 4 way coil connectors:
Ballenger Motorsports - High Performance Electronics
We had a lot of people asking for these parts, so here they are!
#255
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
I will have you know that I ordered these from elsewhere exactly 9 minutes before you made that post
But no worries, you still have more stuff I need. Thanks for keeping stock and bringing things in that we are looking for
But no worries, you still have more stuff I need. Thanks for keeping stock and bringing things in that we are looking for
#257
Elite Member
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: NH
Posts: 9,483
Total Cats: 104
Racetronix - Connector, Fuel Bulkhead 4-Way 280/150
+
Racetronix - Connector Set, M/P 280 US, Female
+
Racetronix - Connector Set, 4-Way GT280S
#258
If you need 12ga wire going into the pump then I dont believe there are terminals for that connected rated high enough. I used this Racetronix - Universal Bulkhead Wiring System, 4-Way, I left the pickup on the original one and ran my 12ga wire into a pair of 14 ga wire, for the same amerapge carrying capacity. But now I found a better solution. The one below can actually handle 12ga wire and current without having to double up terminals.
Racetronix - Connector, Fuel Bulkhead 4-Way 280/150
+
Racetronix - Connector Set, M/P 280 US, Female
+
Racetronix - Connector Set, 4-Way GT280S
Racetronix - Connector, Fuel Bulkhead 4-Way 280/150
+
Racetronix - Connector Set, M/P 280 US, Female
+
Racetronix - Connector Set, 4-Way GT280S
That being said - If you just need a couple of terminals for 12 AWG I'll send them to you for the cost of shipping.
#259
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
Start with this post and keep reading the thread: https://www.miataturbo.net/engine-pe...5/#post1138772
The thread itself has a bunch of stupid in it, but the fuel pump wiring recommendations are solid. I'm probably going to buy this: Racetronix - Universal Bulkhead Wiring System, 4-Way as to not dick around with the stock connector.
The thread itself has a bunch of stupid in it, but the fuel pump wiring recommendations are solid. I'm probably going to buy this: Racetronix - Universal Bulkhead Wiring System, 4-Way as to not dick around with the stock connector.
#260
Elite Member
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: NH
Posts: 9,483
Total Cats: 104
Start with this post and keep reading the thread: https://www.miataturbo.net/engine-pe...5/#post1138772
The thread itself has a bunch of stupid in it, but the fuel pump wiring recommendations are solid. I'm probably going to buy this: Racetronix - Universal Bulkhead Wiring System, 4-Way as to not dick around with the stock connector.
The thread itself has a bunch of stupid in it, but the fuel pump wiring recommendations are solid. I'm probably going to buy this: Racetronix - Universal Bulkhead Wiring System, 4-Way as to not dick around with the stock connector.